سلوك الكسر والسلامة الهيكلية لمركبات الألياف القنبية المعززة لتطبيقات الطيران ذات الحمولة المنخفضة Fracture behaviour and structural integrity of hemp fibre reinforced composites for low load-bearing aerospace applications

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-44443-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42236748
تاريخ النشر: 2026-06-03
المؤلف: N. Santhosh وآخرون
الموضوع الرئيسي: المركبات المدعمة بالألياف الطبيعية

نظرة عامة

تبحث هذه الدراسة في الأداء الميكانيكي لمركبات الإيبوكسي المعززة بألياف القنب، مع التركيز على خصائصها في الشد والانحناء والتأثير. باستخدام تقنية اليد، تم إنشاء طبقات مع محتوى ألياف قنب يتراوح من 25 wt% إلى 45 wt%. أظهرت النتائج أن تركيبة ألياف القنب بنسبة 35 wt% حققت أداءً ميكانيكيًا مثاليًا، حيث حققت قوة شد تبلغ 67.3 ميجا باسكال، ومعامل شد قدره 2.85 جيجا باسكال، وامتداد عند الكسر بنسبة 5.2%. وبالمثل، أظهرت هذه التركيبة قوة انحناء قدرها 99.7 ميجا باسكال ومعامل انحناء قدره 3.9 جيجا باسكال، إلى جانب مقاومة تأثير قدرها 9.4 كيلوجول/م²، مما يبرز قدراتها الفائقة في امتصاص الطاقة. يُعزى الأداء المحسن عند هذا الحمل من الألياف إلى تحسين تفاعل الألياف مع المصفوفة وانتقال الإجهاد الفعال.

تؤكد الدراسة أيضًا أن الإيبوكسي النقي الأساسي (S0) كان لديه قوة شد تبلغ 52.4 ميجا باسكال، وقوة انحناء تبلغ 72.5 ميجا باسكال، وقوة تأثير تبلغ 5.4 كيلوجول/م². أدى إدخال ألياف القنب إلى تحسينات كبيرة، حيث زادت قوة الشد بحوالي 28% وزادت قوة الانحناء بحوالي 37% عند الحمل المثالي 35 wt% (S3). ومع ذلك، تراجع الأداء عند الأحمال الأعلى من الألياف بسبب مشكلات مثل تجمع الألياف وتقليل استمرارية المصفوفة. تؤكد النتائج على إمكانية استخدام ألياف القنب كتعزيز مستدام في التطبيقات شبه الهيكلية، مثل ألواح هياكل السيارات والبناء الخفيف، بينما تظهر أيضًا وجود تبادل بين القوة والمرونة مع زيادة محتوى الألياف.

طرق

في هذه الدراسة، تم تصنيع مركبات البوليمر المعززة بألياف القنب باستخدام راتنج الإيبوكسي LY-556 مخلوطًا مع مادة التصلب HY-951 بنسبة وزن 10:1، تم اختيارها لقوتها الميكانيكية ومقاومتها الكيميائية وثباتها الحراري. تم معالجة ألياف القنب، المستمدة من شركة Go Green Products Ltd.، من سيقان ناضجة ومعالجتها بمحلول هيدروكسيد الصوديوم (NaOH) بنسبة 5% لتعزيز الترابط بين الواجهة مع مصفوفة الإيبوكسي من خلال إزالة الشوائب السطحية مثل اللجنين والهيميسليلوز. أدت هذه المعالجة إلى تحسين شكل الألياف، مما يعزز الالتصاق وأداء المركب بشكل عام. تم تحديد الخصائص الميكانيكية لألياف القنب وراتنج الإيبوكسي، مما يشير إلى أن الألياف تمتلك قوة شد تتراوح بين 550-900 ميجا باسكال ومعامل يونغ يتراوح بين 30-70 جيجا باسكال، بينما يظهر راتنج الإيبوكسي قوة شد تتراوح بين 60-85 ميجا باسكال ومعامل يتراوح بين 2-3 جيجا باسكال.

شمل تصنيع المركب عملية وضع يدوي تلاها تشكيل بالضغط، مع نسب وزن ألياف متغيرة (25%، 30%، 35%، 40%، و45%) لتقييم تأثيرها على الأداء. تم أيضًا إنشاء عينة تحكم من الإيبوكسي النقي للمقارنة. كانت نطاق محتوى الألياف المختار حاسمًا لتحقيق توازن بين التعزيز الفعال واستمرارية المصفوفة، وتجنب مشكلات مثل ضعف نقع الراتنج وتجمع الألياف. خضعت طبقات اللaminates لعملية تشكيل في كيس فراغ لمدة 24 ساعة لضمان سمك موحد وترابط مثالي بين الألياف والمصفوفة. تم الالتزام بمعايير ASTM في التوصيف الميكانيكي، حيث تم إجراء اختبارات الشد والانحناء والتأثير باستخدام أشكال عينات مناسبة. تم اختبار ما لا يقل عن خمس عينات لكل تكوين لضمان موثوقية إحصائية، مع نتائج تشير إلى أداء ميكانيكي متسق عبر تكوينات المركب.

نتائج

تكشف نتائج الدراسة حول مركبات البوليمر المعززة بألياف القنب عن تحسينات كبيرة في الخصائص الميكانيكية مع محتوى الألياف المتغير. أظهرت عينة الإيبوكسي النقي (S0) قوة شد تبلغ 52.4 ميجا باسكال، والتي زادت إلى 67.3 ميجا باسكال عند الحمل المثالي 35 wt% من الألياف (S3)، مما يمثل تحسينًا بنسبة 28%. وقد صاحب هذا الزيادة في قوة الشد ارتفاع في معامل الشد من 2.05 جيجا باسكال إلى 2.87 جيجا باسكال، مما يدل على تفاعل فعال بين الألياف والمصفوفة. ومع ذلك، أدت الأحمال الأعلى من الألياف (40 wt% و45 wt%) إلى انخفاض قوة الشد بسبب مشكلات مثل تجمع الألياف وتقليل نقع الراتنج. كما انخفض الامتداد عند الكسر، مما يؤكد الانتقال من سلوك مرن إلى سلوك هش في المركبات.

أكدت اختبارات التأثير هذه النتائج، حيث زادت قوة التأثير للإيبوكسي النقي (5.4 كيلوجول/م²) إلى ذروتها عند 9.4 كيلوجول/م² عند تحميل الألياف بنسبة 35 wt% (S3). يبرز هذا التحسين قدرة المركب المعززة على امتصاص وتفريق الطاقة من خلال آليات مثل سحب الألياف وجسر الشقوق. ومع ذلك، مثلما حدث مع قوة الشد، تراجعت مقاومة التأثير عند محتويات الألياف الأعلى بسبب عدم التناسق الهيكلي. تختتم الدراسة بالقول إنه بينما تظهر مركبات ألياف القنب وعدًا للتطبيقات الخفيفة، لا سيما في مكونات الطيران غير الهيكلية، فإن تحسين تحميل الألياف بعناية أمر ضروري للحفاظ على الأداء تحت ظروف التحميل الديناميكي.

نقاش

تسلط قسم النقاش في ورقة البحث الضوء على الأداء الميكانيكي لمركبات الإيبوكسي المعززة بألياف القنب، مع التركيز بشكل خاص على خصائص الانحناء والخصائص الشكلية. كانت عينة الإيبوكسي النقي (S0) بمثابة خط الأساس، حيث أظهرت قوة انحناء تبلغ 72.5 ميجا باسكال ومعامل انحناء قدره 2.84 جيجا باسكال. أدى إدخال ألياف القنب إلى تحسين كبير في هذه الخصائص، حيث تم ملاحظة الأداء المثالي عند تحميل الألياف بنسبة 35 wt% (S3)، حيث زادت قوة الانحناء إلى 99.7 ميجا باسكال ومعامل الانحناء إلى 3.90 جيجا باسكال. ومع ذلك، أدى تجاوز هذا الحمل المثالي إلى انخفاض في قوة الانحناء والمعامل بسبب تجمع الألياف وتقليل استمرارية المصفوفة، مما أعاق انتقال الإجهاد الفعال.

قدمت التحقيقات الشكلية باستخدام المجهر الإلكتروني الماسح (SEM) والتحليل الطيفي بالأشعة السينية المشتتة للطاقة (EDS) رؤى حول آليات الفشل في المركب. كشفت صور SEM عن سحب الألياف وقطع المصفوفة، مما يدل على ترابط معتدل بين الألياف القنب ومصفوفة الإيبوكسي. أكدت تحليل EDS التركيب العنصري، مع قمم بارزة للكربون والأكسجين، مما يعكس الطبيعة العضوية لألياف القنب والمصفوفة البوليمرية. بشكل عام، تُظهر الدراسة أن دمج ألياف القنب يحسن بشكل كبير الخصائص الميكانيكية لمركبات الإيبوكسي، لا سيما عند التحميل الأمثل، بينما تكشف أيضًا عن سلامة البنية الدقيقة وآليات الفشل التي تسهم في هذه التحسينات.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-44443-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42236748
Publication Date: 2026-06-03
Author(s): N. Santhosh et al.
Primary Topic: Natural Fiber Reinforced Composites

Overview

This research investigates the mechanical performance of hemp fibre reinforced epoxy composites, focusing on their tensile, flexural, and impact properties. Using the hand lay-up technique, laminates were created with hemp fibre content ranging from 25 wt% to 45 wt%. The results indicated that a 35 wt% hemp fibre composition yielded optimal mechanical performance, achieving a tensile strength of 67.3 MPa, a tensile modulus of 2.85 GPa, and an elongation at break of 5.2%. Similarly, this composition exhibited a flexural strength of 99.7 MPa and a flexural modulus of 3.9 GPa, alongside an impact resistance of 9.4 kJ/m², highlighting its superior energy absorption capabilities. The enhanced performance at this fibre loading is attributed to improved fibre-matrix interaction and effective stress transfer.

The study further establishes that the baseline pristine epoxy (S0) had a tensile strength of 52.4 MPa, flexural strength of 72.5 MPa, and impact strength of 5.4 kJ/m². The introduction of hemp fibres resulted in significant improvements, with tensile strength increasing by approximately 28% and flexural strength by about 37% at the optimal 35 wt% loading (S3). However, performance declined at higher fibre loadings due to issues such as fibre agglomeration and reduced matrix continuity. The findings underscore the potential of hemp fibre as a sustainable reinforcement in semi-structural applications, such as automotive body panels and lightweight construction, while also demonstrating a trade-off between strength and ductility with increased fibre content.

Methods

In this study, hemp fibre-reinforced polymer composites were fabricated using LY-556 epoxy resin mixed with HY-951 hardener in a 10:1 weight ratio, chosen for its mechanical strength, chemical resistance, and thermal stability. The hemp fibres, sourced from Go Green Products Ltd., were processed from mature stalks and treated with a 5% sodium hydroxide (NaOH) solution to enhance interfacial bonding with the epoxy matrix by removing surface impurities such as lignin and hemicellulose. This treatment resulted in improved fibre morphology, promoting better adhesion and overall composite performance. The mechanical properties of the hemp fibres and epoxy resin were characterized, indicating that the fibres possess a tensile strength of 550-900 MPa and a Young’s modulus of 30-70 GPa, while the epoxy resin shows a tensile strength of 60-85 MPa and a modulus of 2-3 GPa.

Composite fabrication involved a hand lay-up process followed by compression molding, with varying fibre weight fractions (25%, 30%, 35%, 40%, and 45%) to assess their impact on performance. A control sample of pristine epoxy was also created for comparison. The chosen fibre content range was critical to balance effective reinforcement and matrix continuity, avoiding issues like poor resin impregnation and fibre agglomeration. The laminate stacks underwent vacuum bag moulding for 24 hours to ensure uniform thickness and optimal fibre-matrix bonding. Mechanical characterization adhered to ASTM standards, with tensile, flexural, and impact tests conducted using appropriate specimen geometries. A minimum of five specimens per configuration were tested to ensure statistical reliability, with results indicating consistent mechanical performance across the composite configurations.

Results

The results of the study on hemp fibre-reinforced polymer composites reveal significant improvements in mechanical properties with varying fibre content. The pristine epoxy specimen (S0) demonstrated a tensile strength of 52.4 MPa, which increased to 67.3 MPa at the optimal 35 wt% fibre loading (S3), marking a 28% enhancement. This increase in tensile strength was accompanied by a rise in tensile modulus from 2.05 GPa to 2.87 GPa, indicating effective fibre-matrix interaction. However, higher fibre loadings (40 wt% and 45 wt%) resulted in decreased tensile strength due to issues such as fibre agglomeration and reduced resin wetting. Elongation at break also decreased, confirming a transition from ductile to brittle behaviour in the composites.

Impact testing further corroborated these findings, with the impact strength of the pristine epoxy (5.4 kJ/m²) increasing to a peak of 9.4 kJ/m² at 35 wt% fibre loading (S3). This improvement highlights the composite’s enhanced ability to absorb and dissipate energy through mechanisms like fibre pull-out and crack bridging. However, similar to tensile strength, impact resistance declined at higher fibre contents due to structural inconsistencies. The study concludes that while hemp fibre composites show promise for lightweight applications, particularly in non-structural aerospace components, careful optimization of fibre loading is essential to maintain performance under dynamic loading conditions.

Discussion

The discussion section of the research paper highlights the mechanical performance of hemp fibre-reinforced epoxy composites, particularly focusing on flexural properties and morphological characteristics. The pristine epoxy specimen (S0) served as a baseline, exhibiting a flexural strength of 72.5 MPa and a flexural modulus of 2.84 GPa. The introduction of hemp fibres significantly enhanced these properties, with the optimal performance observed at 35 wt% fibre loading (S3), where flexural strength increased to 99.7 MPa and flexural modulus to 3.90 GPa. However, exceeding this optimal loading resulted in a decline in flexural strength and modulus due to fibre clustering and reduced matrix continuity, which hindered effective stress transfer.

Morphological investigations using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) provided insights into the failure mechanisms of the composite. The SEM images revealed fibre pull-out and matrix shearing, indicating moderate interfacial bonding between the hemp fibres and the epoxy matrix. The EDS analysis confirmed the elemental composition, with prominent peaks for carbon and oxygen, reflecting the organic nature of the hemp fibres and the polymer matrix. Overall, the study demonstrates that the incorporation of hemp fibres significantly improves the mechanical properties of epoxy composites, particularly at optimal loading, while also revealing the underlying microstructural integrity and failure modes that contribute to these enhancements.