DOI: https://doi.org/10.12688/f1000research.176577.1
تاريخ النشر: 2026-03-05
المؤلف: Sattar Abed Mutlag وآخرون
الموضوع الرئيسي: اتخاذ القرار متعدد المعايير
نظرة عامة
تقدم هذه الورقة البحثية إطار عمل محسن لاتخاذ القرار يهدف إلى اختيار المواد غير المعدنية والمعدنية المناسبة لخطوط إمداد المياه (WSPs)، مع التركيز على سلامة الصحة، والموثوقية، وكفاءة التكلفة. تدمج الدراسة الهندسة، والصحة العامة، والاقتصاد في عملية اختيار المواد الموحدة، مع تحديد ثلاثة معايير تقييم رئيسية: السلامة والموثوقية، التكلفة، والصحة والنظافة. تتناول المنهجية التحديات في بناء مصفوفة مقارنة ثنائية متسقة باستخدام عملية التحليل الهرمي (AHP) واختيار المواد التي تلبي المعايير الهندسية والصحية والاقتصادية. تم تقييم خمسة مواد أنابيب مستخدمة بشكل شائع—النحاس رقيق الجدران، الفولاذ المجلفن المغطى بـ PVC، PP-R، PVC-U، والفولاذ المقاوم للصدأ رقيق الجدران—من خلال استبيان مصمم حديثًا وتم تحسينه كميًا باستخدام مقياس مقارنة من تسع نقاط.
تشير النتائج إلى أن إطار العمل المحسن-AHP المقترح يحدد باستمرار PP-R كأفضل خيار لخطوط إمداد المياه، محققًا أعلى وزن إجمالي قدره 0.695. يتم إثبات قوة إطار العمل من خلال تحليلات الحساسية والمقارنات مع الدراسات الحالية، مما يؤكد موثوقيته في تقييم مواد الأنابيب. تؤكد الدراسة على أهمية دمج اعتبارات النظافة جنبًا إلى جنب مع المعايير التقليدية مثل الموثوقية وتكلفة دورة الحياة، مما يعالج فجوة كبيرة في الأدبيات الحالية. تعزز التحسينات التي تم إدخالها في النسخة الثانية من الورقة، بما في ذلك تحليل حساسية وزن المعايير ومقارنة مع الدراسات المنشورة، صلاحية إطار العمل لتطبيقه في أنابيب إمداد المياه الداخلية.
مقدمة
تؤكد مقدمة هذه الورقة البحثية على الدور الحاسم لشبكات إمداد المياه (WSPs) في تطوير البنية التحتية، مع تسليط الضوء على تأثيرها الكبير على الصحة العامة والنمو الاقتصادي. يعد اختيار المواد المناسبة للأنابيب أمرًا حيويًا، حيث يشكل جزءًا كبيرًا من التكاليف الإجمالية ويؤثر بشكل مباشر على موثوقية وكفاءة نظام إمداد المياه. تحدد الورقة عدة قضايا ملحة تؤثر على خطوط إمداد المياه، بما في ذلك التآكل، والشيخوخة، وتلوث جودة المياه الثانوية، وزيادة استهلاك الطاقة بسبب التسريبات. تتطلب هذه التحديات اختيار المواد بعناية لضمان الموثوقية، وكفاءة التكلفة، وسهولة الصيانة، ومنع الملوثات الثانوية.
تهدف الدراسة إلى معالجة تحديين رئيسيين في عملية اختيار المواد لخطوط إمداد المياه: دمج الاعتبارات الاقتصادية والصحية والهندسية، وإقامة مصفوفة مقارنة ثنائية متسقة باستخدام عملية التحليل الهرمي (AHP). لتعزيز اتخاذ القرار، يقترح المؤلفون استبيانًا مبسطًا مصممًا لتقليل التناقضات في الأحكام الثنائية. لا يدمج هذا الإطار فقط معايير الصحة والموثوقية والتكلفة في نموذج قرار شفاف، بل يتضمن أيضًا ملاءمة اقتصادية لدورة الحياة. بالإضافة إلى ذلك، يتم استخدام تقنية ترتيب التفضيل من خلال التشابه مع الحل المثالي (TOPSIS) كأداة تحقق لضمان قوة الترتيبات المستمدة من عملية AHP، مما يميز هذا النهج عن الدراسات السابقة التي ركزت بشكل أساسي على العوامل الاقتصادية أو الميكانيكية.
طرق
في هذا القسم، يحدد المؤلفون طرق تحليلية متنوعة تم استخدامها في دراستهم، مع التركيز بشكل خاص على إجراءات مطيافية الكتلة (MS) الشائعة. يتم تصنيف الطرق إلى معيارين رئيسيين: الأداء مقابل التكلفة، ومؤشرات الخصائص التي يتم وزنها. تعمل هذه المعايير كإطار لتقييم فعالية وكفاءة تقنيات MS التي تم مناقشتها، مما يسمح بتحليل شامل لملاءمتها في سياقات بحثية مختلفة. يبرز التركيز على كل من الأداء والتكلفة أهمية تحقيق التوازن بين الجودة التحليلية والاعتبارات الاقتصادية في اختيار طرق MS.
نتائج
في قسم النتائج، توضح الدراسة هيكل نموذج أنبوب إمداد المياه (WSP)، الذي يتكون من ثلاث طبقات رئيسية: طبقة القاعدة، وطبقة الهدف، وطبقة الحلول، مع التركيز على بناء WSP للمباني. حدد استبيان للخبراء والعملاء العناصر الثلاثة الأكثر أهمية داخل طبقة القاعدة وهي الصحة والنظافة، والسلامة والموثوقية، وتكلفة الحفاظ على الطاقة. تقيم البحث خمسة أنواع من الأنابيب: PP-R، PVC-U، النحاس رقيق الجدران، بطانة أنبوب PVC المجلفن، وأنبوب الفولاذ المقاوم للصدأ رقيق الجدران، مما يؤدي إلى تطوير نموذج WSP هرمي.
علاوة على ذلك، تقارن الدراسة نتائج الترتيب لطرق عملية التحليل الهرمي (AHP) وتقنية ترتيب التفضيل من خلال التشابه مع الحل المثالي (TOPSIS). تكشف النتائج، الملخصة في الجدول 9، أن كلا الطريقتين تعطيان ترتيبات متطابقة لمواد الأنابيب، حيث تم تصنيف PP-R في المرتبة الأولى، تليها PVC-U والفولاذ المقاوم للصدأ في المرتبتين الثانية والثالثة، على التوالي. يعزز هذا الاتساق عبر منهجيات اتخاذ القرار المختلفة موثوقية إطار اختيار المواد المقترح، مما يشير إلى أن النتائج قوية وليست معتمدة على نهج تحليلي واحد.
مناقشة
في هذا القسم، يناقش المؤلفون التحسينات التي تم إدخالها على إطار اختيار المواد الخاص بهم لخطوط إمداد المياه (WSPs) استجابةً لتعليقات المراجعين. تشمل التعديلات الرئيسية دمج الاعتبارات الهيدروليكية، والتحقق من خلال TOPSIS وتحليلات الحساسية، ومراجعة مقارنة مع الأدبيات الحالية. يؤكد المؤلفون على أهمية تحقيق التوازن بين الأهداف المتعددة—مثل التكلفة، والجودة، والامتثال التنظيمي—عند اختيار المواد، مما يبرز الحاجة إلى نهج منهجي لمعالجة هذه الأهداف المتعارضة غالبًا.
تشير النتائج إلى أن طريقة AHP تدمج بشكل فعال المعايير النوعية والكمية، مما يؤدي إلى ترتيب لمواد الأنابيب بناءً على الأداء الصحي، والموثوقية، وكفاءة التكلفة. على وجه التحديد، برز أنبوب PP-R كأفضل خيار، يليه PVC-U، والفولاذ المقاوم للصدأ، والنحاس، وأنابيب PVC المجلفنة. تم تأكيد قوة طريقة الاختيار المعتمدة على AHP من خلال تحليلات الحساسية، التي أظهرت ترتيبات مستقرة على الرغم من التغيرات في أوزان المعايير. بالإضافة إلى ذلك، تتماشى النتائج مع الدراسات السابقة، مما يعزز صلاحية الإطار المقترح كأداة دعم قرار لاختيار المواد المناسبة في تطبيقات المياه الصالحة للشرب. يدعو المؤلفون إلى مزيد من التحسينات لضمان اتساق وشفافية منهجيتهم، لا سيما في بناء مصفوفات الحكم وتركيب النتائج.
DOI: https://doi.org/10.12688/f1000research.176577.1
Publication Date: 2026-03-05
Author(s): Sattar Abed Mutlag et al.
Primary Topic: Multi-Criteria Decision Making
Overview
This research paper presents an enhanced decision-making framework aimed at selecting appropriate non-metallic and metallic materials for water supply pipes (WSPs), focusing on health safety, reliability, and cost efficiency. The study integrates engineering, public health, and economics into a unified material selection process, identifying three primary evaluation criteria: safety and reliability, cost, and health and cleanliness. The methodology addresses challenges in constructing a consistent pairwise comparison matrix using the Analytic Hierarchy Process (AHP) and selecting materials that meet engineering, health, and economic standards. Five commonly used pipe materials—thin-walled copper, PVC-lined galvanized steel, PP-R, PVC-U, and thin-walled stainless steel—were evaluated through a newly designed questionnaire and quantitatively optimized using a nine-point comparison scale.
The findings indicate that the proposed improved-AHP framework consistently identifies PP-R as the optimal choice for WSPs, achieving the highest overall weight of 0.695. The framework’s robustness is demonstrated through sensitivity analyses and comparisons with existing studies, confirming its reliability in evaluating pipe materials. The study emphasizes the importance of incorporating hygiene considerations alongside traditional criteria such as reliability and life-cycle cost, addressing a significant gap in existing literature. The enhancements made in the second version of the paper, including criterion-weight sensitivity analysis and a comparison with published studies, further validate the framework’s applicability for internal building supply piping.
Introduction
The introduction of this research paper emphasizes the critical role of water supply networks (WSPs) in infrastructure development, highlighting their significant impact on public health and economic growth. The selection of appropriate piping materials is crucial, as it constitutes a substantial portion of the overall costs and directly influences the reliability and efficiency of the water supply system. The paper identifies several pressing issues affecting WSPs, including corrosion, aging, secondary water quality pollution, and increased energy consumption due to leaks. These challenges necessitate careful material selection to ensure reliability, cost-effectiveness, ease of maintenance, and the prevention of secondary pollutants.
The study aims to address two primary challenges in the material selection process for water supply pipes: the integration of economic, health, and engineering considerations, and the establishment of a consistent pairwise comparison matrix using the Analytic Hierarchy Process (AHP). To enhance decision-making, the authors propose a simplified questionnaire designed to minimize inconsistencies in pairwise judgments. This framework not only consolidates health, reliability, and cost criteria into a transparent decision model but also incorporates lifecycle economic suitability. Additionally, the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) is utilized as a validation tool to ensure the robustness of the rankings derived from the AHP process, distinguishing this approach from previous studies that primarily focused on economic or mechanical factors.
Methods
In this section, the authors outline various analytical methods utilized in their study, specifically focusing on popular mass spectrometry (MS) procedures. The methods are categorized into two primary criteria: performance versus cost, and property indices that are weighted. These criteria serve as a framework for evaluating the effectiveness and efficiency of the MS techniques discussed, allowing for a comprehensive analysis of their applicability in different research contexts. The emphasis on both performance and cost highlights the importance of balancing analytical quality with economic considerations in the selection of MS methods.
Results
In the results section, the study outlines the structure of a Water Supply Pipe (WSP) model, which consists of three primary layers: the rule layer, target layer, and solutions layer, with an emphasis on the construction of the Building WSP. A survey of experts and clients identified the top three critical elements within the rule layer as health and cleanliness, safety and reliability, and cost of energy conservation. The research evaluates five types of pipes: PP-R, PVC-U, thin-walled copper, lining of PVC galvanized pipe, and thin-walled stainless steel pipe, culminating in the development of a hierarchical WSP model.
Furthermore, the study compares the ranking results of the Analytic Hierarchy Process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) methods. The findings, summarized in Table 9, reveal that both methods yield identical rankings for the pipe materials, with PP-R ranked first, followed by PVC-U and stainless steel in second and third place, respectively. This consistency across different decision-making methodologies enhances the reliability of the proposed material selection framework, suggesting that the results are robust and not reliant on a single analytical approach.
Discussion
In this section, the authors discuss the enhancements made to their material selection framework for water supply pipes (WSPs) in response to reviewer feedback. Key revisions include the incorporation of hydraulic considerations, validation through TOPSIS and sensitivity analyses, and a comparative review with existing literature. The authors emphasize the importance of balancing multiple objectives—such as cost, quality, and regulatory compliance—when selecting materials, highlighting the need for a systematic approach to address these often conflicting goals.
The findings indicate that the AHP method effectively integrates qualitative and quantitative criteria, yielding a ranking of pipe materials based on health performance, reliability, and cost-effectiveness. Specifically, the PP-R pipe emerged as the top choice, followed by PVC-U, stainless steel, copper, and PVC galvanized pipes. The robustness of the AHP-based selection method was confirmed through sensitivity analyses, which showed stable rankings despite variations in criteria weights. Additionally, the results align with previous studies, reinforcing the proposed framework’s validity as a decision-support tool for selecting appropriate materials in potable water applications. The authors call for further refinements to ensure the consistency and transparency of their methodology, particularly in the construction of judgment matrices and the synthesis of results.
