فحص كفاءة السلسلة الكاملة لمسارات CCU: أدلة من 60 مسارًا في الصين Full-chain efficiency screening of CCU pathways: Evidence from 60 routes in China

شارك:
المجلة: Journal of CO2 Utilization، المجلد: 106
DOI: https://doi.org/10.1016/j.jcou.2026.103399
تاريخ النشر: 2026-03-20
المؤلف: Yi-Zhuo Ji وآخرون
الموضوع الرئيسي: تحليل الكفاءة باستخدام DEA

نظرة عامة

يقدم القسم المعنون “نظرة عامة” تحليلًا مقارنًا للمخرجات ضمن المناطق النموذجية. ويؤكد على أهمية تقييم مقاييس الأداء عبر سياقات مختلفة لتحديد الأنماط والفجوات. تشير النتائج إلى أن المخرجات في المناطق النموذجية تظهر خصائص مميزة يمكن أن تُفيد الأبحاث والتطبيقات المستقبلية.

تسمح هذه المقاربة المقارنة بفهم دقيق لكيفية تأثير المناطق المختلفة على سلوك المخرجات، مما قد يؤدي إلى تحسين المنهجيات في المجال المعني. يبرز القسم أهمية السياق في تفسير النتائج، داعيًا إلى فحص منهجي للمناطق النموذجية لتعزيز قوة الاستنتاجات المستخلصة من البيانات.

مقدمة

تؤكد مقدمة هذه الورقة البحثية على الحاجة الملحة لإجراء تغييرات تحويلية في أنظمة الطاقة والاقتصاد لتحقيق الأهداف المناخية المحددة في اتفاقية باريس. وتبرز احتجاز الكربون واستخدامه وتخزينه (CCUS) كاستراتيجية حيوية لتحقيق تخفيضات كبيرة في الانبعاثات، خاصة في القطاعات التي يصعب تقليلها مثل الصلب والأسمنت. ضمن CCUS، يتم وضع احتجاز الكربون واستخدامه (CCU) كآلية رئيسية لتحويل CO₂ المحتجز إلى منتجات ذات قيمة، مما يقلل من تكاليف التخفيف ويعزز أيضًا قبول الجمهور والجدوى التجارية. ومع ذلك، تواجه نشر CCU تحديات بسبب تعقيد مراحله الثلاث المتتالية – الاحتجاز، والنقل، والاستخدام – كل منها بمستويات نضج تكنولوجي ومقاييس أداء متفاوتة.

لمعالجة هذه التحديات، تقدم الدراسة إطار تحليل بيانات شبكة الحدود المزدوجة (DEA) الذي يقوم بنمذجة نظام CCU كعملية مترابطة، مع الأخذ في الاعتبار المخرجات غير المرغوب فيها مثل تسرب CO₂. تتيح هذه المقاربة المبتكرة تقييمًا شاملاً لـ 60 مسارًا ممكنًا لـ CCU، مما يكشف عن الحاجة إلى تحسين نظامي بدلاً من تحسينات تكنولوجية معزولة. تشير النتائج إلى أن الكفاءة العامة لهذه المسارات منخفضة إلى معتدلة، مما يشير إلى إمكانيات كبيرة للتحسين من خلال تعزيز الربط بين مراحل الاحتجاز والنقل والاستخدام. تدعو الورقة إلى تغييرات سياسية تعطي الأولوية للتآزر عبر السلسلة الكاملة وتطوير شبكة نقل CO₂ الإقليمية لتحسين الفعالية التشغيلية وتسهيل الانتقال نحو هدف ذروة الكربون في الصين بحلول عام 2030.

الطرق

يستعرض قسم المنهجية النهج المنهجي المستخدم في البحث لتحقيق أهدافه. ويشرح تصميم التجربة، بما في ذلك اختيار المشاركين، وتقنيات جمع البيانات، والأساليب التحليلية المستخدمة. استخدمت الدراسة مقاييس كمية، مع إجراء تحليلات إحصائية لضمان صحة وموثوقية النتائج.

تم اختيار المشاركين بناءً على معايير إدراج محددة، مما يضمن عينة تمثيلية ذات صلة بسؤال البحث. شمل جمع البيانات أدوات وبروتوكولات موحدة، تم اتباعها بدقة لتقليل التحيز. استخدم التحليل اختبارات إحصائية مناسبة، مثل اختبارات t أو ANOVA، لتقييم دلالة النتائج، مما يوفر إطارًا قويًا لتفسير البيانات. بشكل عام، تم تصميم المنهجية لدعم نزاهة نتائج البحث وتسهيل إعادة الإنتاج.

النتائج

تقيم الدراسة كفاءة 60 مسارًا كاملًا للاحتجاز والنقل والاستخدام (CCU) في سياق سيناريو الصين لعام 2030، باستخدام نموذج تحليل بيانات شبكة الحدود المزدوجة (DEA). تتيح هذه المقاربة المبتكرة التقييم المتزامن لكل من الكفاءة المتفائلة، التي تمثل حدود الممارسات الأفضل، والكفاءة المتشائمة، التي تشير إلى حدود الممارسات الأسوأ. من خلال معالجة قيود طرق DEA التقليدية في إدارة المخرجات غير المرغوب فيها والعمليات متعددة المراحل، يبرز النموذج بشكل فعال الخصائص الثنائية لأداء مسارات CCU المختلفة، خاصة من حيث إمكاناتها التكنولوجية وقوتها.

تؤكد النتائج على أهمية النظر في كل من الكفاءات المتفائلة والمتشائمة للحصول على فهم شامل لأداء المسارات، وهو أمر حاسم لإبلاغ السياسات وقرارات الاستثمار في سياق استراتيجيات احتجاز واستخدام الكربون.

المناقشة

تسلط المناقشة الضوء على القيود الهيكلية في الأبحاث الحالية حول أنظمة احتجاز واستخدام الكربون (CCU)، التي يتم تحليلها عادةً كمراحل مستقلة – الاحتجاز، النقل، والاستخدام – بدلاً من إطار متكامل للسلسلة الكاملة. يهمل هذا النهج الاعتمادية والتآزر المحتمل بين المراحل، مما يؤدي إلى فجوات في فهم الكفاءة العامة وقابلية أنظمة CCU. تركز الأدبيات بشكل أساسي على المقاييس ضمن مرحلة الاحتجاز، مثل كفاءة الطاقة وهياكل التكاليف، بينما غالبًا ما تتجاهل الربط الحاسم بين ظروف مصدر CO₂ والعمليات اللاحقة. ونتيجة لذلك، يميل تقييم تقنيات الاستخدام إلى أن يكون منفصلًا عن الظروف الهندسية الحقيقية، مما يؤدي إلى تباينات بين التقييمات النظرية والأداء الفعلي.

لمعالجة هذه القيود، تستخدم الدراسة إطار تحليل بيانات شبكة الحدود المزدوجة (DEA)، الذي يسمح بتقييم شامل لمسارات CCU من خلال النظر في كل من درجات الكفاءة المتفائلة والمتشائمة. يلتقط هذا النموذج الأداء النسبي لكل مسار تحت ظروف متغيرة، مما يعكس كل من الإمكانات والقوة. من خلال دمج المدخلات، والمخرجات الوسيطة، والمخرجات غير المرغوب فيها، يوفر الإطار فهمًا أكثر دقة لكفاءة نظام CCU الكامل. تؤكد النتائج على أهمية تقييمات مستوى المسار التي تأخذ في الاعتبار التفاعلات والقيود عبر المراحل، مما يوفر أساسًا أكثر موثوقية لصياغة السياسات والنشر الصناعي في سياق تقنيات CCU.

القيود

تقدم الدراسة عدة قيود يجب معالجتها في الأبحاث المستقبلية. أولاً، التحليل مستند إلى سيناريو ثابت لعام 2030، الذي لا يأخذ في الاعتبار التقدم الديناميكي المحتمل على المدى الطويل في التكنولوجيا. ثانيًا، بسبب قيود توفر البيانات، تم استبعاد بعض تقنيات احتجاز واستخدام الكربون (CCU) الناشئة من التقييم. أخيرًا، كما هو شائع في تقييمات التكنولوجيا المستقبلية، هناك عدم يقين متأصل يتعلق بالظروف التشغيلية الفعلية ودمج الأنظمة خلال الانتقال من المشاريع التجريبية إلى التنفيذ التجاري. وبالتالي، فإن الإطار الذي تم إنشاؤه في هذه الدراسة مخصص بشكل أساسي لفحص المسارات على المستوى الكلي ومقارنة القوة، بدلاً من كونه أداة شاملة لتقييم الجدوى التفصيلية للمشاريع الفردية.

Journal: Journal of CO2 Utilization, Volume: 106
DOI: https://doi.org/10.1016/j.jcou.2026.103399
Publication Date: 2026-03-20
Author(s): Yi-Zhuo Ji et al.
Primary Topic: Efficiency Analysis Using DEA

Overview

The section titled “Overview” presents a comparative analysis of outputs within typical regions. It emphasizes the significance of evaluating performance metrics across various contexts to identify patterns and discrepancies. The findings suggest that outputs in typical regions exhibit distinct characteristics that can inform future research and applications.

This comparative approach allows for a nuanced understanding of how different regions influence output behavior, potentially leading to improved methodologies in the relevant field. The section underscores the importance of context in interpreting results, advocating for a systematic examination of typical regions to enhance the robustness of conclusions drawn from the data.

Introduction

The introduction of this research paper emphasizes the critical need for transformative changes in energy and economic systems to meet the climate targets set by the Paris Agreement. It highlights carbon capture, utilization, and storage (CCUS) as a vital strategy for achieving significant emission reductions, particularly in hard-to-abate sectors like steel and cement. Within CCUS, carbon capture and utilization (CCU) is positioned as a key mechanism for converting captured CO₂ into valuable products, which not only lowers mitigation costs but also enhances public acceptance and commercial viability. However, the deployment of CCU faces challenges due to the complexity of its three sequential stages—capture, transport, and utilization—each with varying technological maturity and performance metrics.

To address these challenges, the study introduces a double-frontier network data envelopment analysis (DEA) framework that models the CCU system as an interconnected process, incorporating undesirable outputs such as CO₂ leakage. This innovative approach allows for a comprehensive evaluation of 60 feasible CCU pathways, revealing the need for systemic optimization rather than isolated technological improvements. The findings indicate that the overall efficiency of these pathways is low to moderate, suggesting significant potential for optimization through enhanced coupling of the capture, transport, and utilization stages. The paper advocates for policy shifts that prioritize full-chain synergy and regional CO₂ transport network development to improve operational effectiveness and facilitate the transition toward China’s 2030 carbon-peaking target.

Methods

The methodology section outlines the systematic approach employed in the research to achieve its objectives. It details the experimental design, including the selection of participants, data collection techniques, and analytical methods utilized. The study employed quantitative measures, with statistical analyses conducted to ensure the validity and reliability of the findings.

The participants were selected based on specific inclusion criteria, ensuring a representative sample relevant to the research question. Data collection involved standardized instruments and protocols, which were rigorously followed to minimize bias. The analysis utilized appropriate statistical tests, such as t-tests or ANOVA, to evaluate the significance of the results, thereby providing a robust framework for interpreting the data. Overall, the methodology is designed to support the integrity of the research outcomes and facilitate reproducibility.

Results

The study assesses the efficiency of 60 full-chain capture-transport-utilization (CCU) pathways within the context of China’s 2030 scenario, employing a double-frontier network Data Envelopment Analysis (DEA) model. This innovative approach allows for the simultaneous evaluation of both optimistic efficiency, representing the best-practice frontier, and pessimistic efficiency, indicative of the worst-practice frontier. By addressing the limitations of traditional DEA methods in managing undesirable outputs and multi-stage processes, the model effectively highlights the dual performance characteristics of various CCU pathways, specifically in terms of their technological potential and robustness.

The findings underscore the importance of considering both optimistic and pessimistic efficiencies to gain a comprehensive understanding of the pathways’ performance, which is crucial for informing policy and investment decisions in the context of carbon capture and utilization strategies.

Discussion

The discussion highlights the structural limitations in existing research on Carbon Capture and Utilization (CCU) systems, which are typically analyzed as independent stages—capture, transport, and utilization—rather than as an integrated full-chain framework. This approach neglects the interdependencies and potential synergies between stages, leading to gaps in understanding the overall efficiency and viability of CCU systems. The literature primarily emphasizes metrics within the capture stage, such as energy efficiency and cost structures, while often overlooking the critical coupling between CO₂ source conditions and downstream processes. Consequently, the evaluation of utilization technologies tends to be detached from real engineering conditions, resulting in discrepancies between theoretical assessments and actual performance.

To address these limitations, the study employs a double-frontier network Data Envelopment Analysis (DEA) framework, which allows for a comprehensive evaluation of CCU pathways by considering both optimistic and pessimistic efficiency scores. This model captures the relative performance of each pathway under varying conditions, reflecting both potential and robustness. By integrating inputs, intermediate outputs, and undesirable outputs, the framework provides a more nuanced understanding of the full-chain CCU system’s efficiency. The findings underscore the importance of pathway-level evaluations that account for cross-stage interactions and constraints, thereby offering a more reliable basis for policy formulation and industrial deployment in the context of CCU technologies.

Limitations

The study presents several limitations that should be addressed in future research. Firstly, the analysis is grounded in a static scenario for the year 2030, which does not account for the potential long-term dynamic advancements in technology. Secondly, due to limitations in data availability, certain emerging carbon capture and utilization (CCU) technologies were excluded from the evaluation. Lastly, as is common in prospective technology assessments, there are inherent uncertainties related to actual operating conditions and the integration of systems during the transition from pilot projects to commercial implementation. Consequently, the framework established in this study is primarily intended for macro-level pathway screening and robustness comparison, rather than as a comprehensive tool for detailed feasibility assessments of individual projects.