DOI: https://doi.org/10.3311/ppar.43313
تاريخ النشر: 2026-03-25
المؤلف: Johanna Pék
الموضوع الرئيسي: الهندسة المعمارية والتصميم الحسابي
نظرة عامة
يتناول هذا القسم من ورقة البحث دمج الهندسة التفاضلية في التعليم المعماري من خلال نهج بيداغوجي بصري. يبرز الاعتماد على التصميم الخوارزمي والذكاء الاصطناعي في العمارة، مشيرًا إلى أن العديد من المصممين يفتقرون إلى فهم عميق للمبادئ الرياضية الأساسية. لمعالجة هذه الفجوة، يقترح المؤلفون منهجًا دراسيًا يستخدم GeoGebra 3D كأداة رئيسية، مع التركيز على إيجاد الأشكال البارامترية والتعرف على الأشكال بدلاً من البراهين المجردة. يستند هذا النهج إلى نموذج فان هيلي للتفكير الهندسي ونظرية الحمل المعرفي، بهدف تعزيز دقة الطلاب الهندسية مع الحفاظ على الصلة المعمارية.
تشير النتائج إلى أن إتقان المفاهيم الرياضية الأساسية يعزز بشكل كبير من قدرات الطلاب الإبداعية، مما يسمح بالتلاعب الواعي بالأشكال المعقدة. يستنتج المؤلفون أن تدريس الهندسة التفاضلية لطلاب الهندسة المعمارية ممكن، حتى لأولئك الذين ليس لديهم خلفية رياضية قوية. من خلال إعطاء الأولوية للتصور والمهام المتمحورة حول التطبيق على الأسس المجردة، يعزز المقرر الإبداع ويintegrates المعرفة الهندسية في مهارات الطلاب، مما يعدهم في النهاية ليصبحوا معمارين مبتكرين في العصر الرقمي.
مقدمة
تسلط المقدمة الضوء على تحدٍ حاسم في تعليم الهندسة المعمارية، خاصة في سياق الاعتماد المتزايد على أدوات الذكاء الاصطناعي (AI). تؤكد على ضرورة أن يقوم المعماريون الشباب بتطوير مهارات التفكير النقدي التي تسمح لهم بتحليل ومساءلة مخرجات برامج الكمبيوتر بدلاً من قبولها بلا نقد. تشير الأدبيات التي تم مراجعتها إلى أن تطوير التفكير الهندسي كان محور اهتمام في التعليم الثانوي والعالي، مع دراسات متعددة تؤكد أهميته (Alalouch, 2018; Cocchiarella, 2006; Cumino et al., 2021; Kaufmann, 2009; Pék, 2024a; 2024b; Pinho, 2013; Uçar et al., 2023; van Merriënboer et al., 2024).
تاريخيًا، كان التدريب الرياضي الصارم، خاصة في الهندسة الوصفية، ضروريًا للمعماريين، حيث أثر بشكل مباشر على قدرتهم على تصميم حتى الهياكل البسيطة. ومع ذلك، أدى ظهور الأسطح الحرة والتصميم الخوارزمي إلى تغيير هذا النموذج، مما جعل البيانات الهندسية التفاضلية—مثل الانحناء الغاوسي—جزءًا لا يتجزأ ليس فقط للتحليل بعد التصميم ولكن أيضًا كمعلمات نشطة في عملية التصميم. وبالتالي، يجادل المؤلفون بأن الفهم الأساسي للهندسة التفاضلية أمر حيوي للمعماريين المستقبليين، مما يمكنهم من التفاعل بفعالية مع برامج التصميم المعاصرة (مثل Rhino وGrasshopper) بطريقة تتجاوز مجرد الاستخدام، وتعزز إتقانًا أعمق للمبادئ الهندسية.
النتائج
تشير نتائج الدورة المقدمة في هذه الورقة إلى استقبال إيجابي من الطلاب، حيث يسعى البعض لمتابعة دراسات إضافية في برامج الدكتوراه، معتبرين الدورة خطوة تحضيرية. تُظهر عدة مشاريع طلابية الكفاءات المتقدمة التي تم تطويرها خلال الدورة، مع عرض مجموعة من أنواع الأسطح، بما في ذلك أسطح الثورات والأسطح الحلزونية العامة. على سبيل المثال، تضمنت إحدى المشاريع إعادة بناء نموذج مستوحى من مبنى مستقبلي، مما يتطلب تحليلًا هندسيًا عالي المستوى ومهارات التعرف على الأشكال. أظهر مشروع آخر إتقانًا في إيجاد الأشكال من خلال استخدام الأسطح الموجهة، مثل الأسطوانات والكونويد، مما أدى إلى جمالية شبه حرة الشكل.
توضح أمثلة إضافية الأسس الرياضية الصارمة المطبقة في المشاريع، مثل ضمان استمرارية المماس (C¹) في تجميع الأسطح وإدارة التقاطعات المعقدة للأسطح. ومن الجدير بالذكر أن الطلاب أظهروا كفاءة تقنية كبيرة، حيث قاموا بالتلاعب بمجالات المعلمات وأنواع الأسطح بوعي رياضي. كانت الأصالة والدقة الهندسية التفاضلية للمشاريع مثيرة للإعجاب بشكل خاص، حيث انتقل الطلاب من تمثيلات هندسية أساسية إلى تصاميم بارامترية أكثر تعقيدًا باستخدام GeoGebra. تشير هذه النقلة إلى فهم أعمق للتفاعل بين الجمالية والمبادئ الهندسية التفاضلية في التصميم المعماري.
المناقشة
يتناول قسم المناقشة في ورقة البحث التحديات المتعلقة بتدريس الهندسة التفاضلية لطلاب الهندسة المعمارية، مسلطًا الضوء على الفجوة في عمليات التفكير بين الرياضيين والمعماريين. غالبًا ما يركز الرياضيون على البراهين المجردة والدقة، بينما يتفوق المعماريون في التطبيقات العملية ولكن قد يفتقرون إلى فهم عميق للمبادئ الهندسية الأساسية. يقترح المؤلفون دورة مصممة لتحقيق توازن—توفير عمق كافٍ في الهندسة التفاضلية مع الحفاظ على جاذبيتها البصرية وقابليتها للتطبيق في التصميم المعماري. تشمل الاستراتيجيات البيداغوجية الرئيسية تطوير التفكير البصري للطلاب والتعرف على الأشكال، واستخدام الدعم المعرفي ونظرية الحمل المعرفي لتسهيل التعلم، واستخدام برامج ديناميكية مثل GeoGebra لتعزيز فهم المنحنيات والأسطح.
تم هيكلة الدورة حول نموذج فان هيلي للتفكير الهندسي، مما يوجه الطلاب من التصور الأساسي إلى مستويات أعلى من التجريد والدقة. يركز المنهج على استكشاف شامل لأنواع الأسطح ذات الصلة بالعمارة، مع دمج المعرفة النظرية مع تمارين عملية تعزز الإبداع وحل المشكلات بشكل مستقل. يدعو المؤلفون إلى نهج قائم على المشاريع، حيث يطبق الطلاب تعلمهم من خلال مهام مستقلة تشجع على التجريب مع الأشكال المعقدة. في النهاية، تشير النتائج إلى أنه مع الأساليب والأدوات البيداغوجية المناسبة، من الممكن تدريس الهندسة التفاضلية بفعالية للمعماريين المستقبليين، مما يعزز قدراتهم الإبداعية وفهمهم للمفاهيم الهندسية.
DOI: https://doi.org/10.3311/ppar.43313
Publication Date: 2026-03-25
Author(s): Johanna Pék
Primary Topic: Architecture and Computational Design
Overview
This research paper section discusses the integration of differential geometry into architectural education through a visual pedagogical approach. It highlights the reliance on algorithmic design and artificial intelligence in architecture, noting that many designers lack a deep understanding of the underlying mathematical principles. To address this gap, the authors propose a curriculum that employs GeoGebra 3D as a primary tool, focusing on parametric form-finding and form recognition rather than abstract proofs. This approach is grounded in the Van Hiele model of geometric thinking and Cognitive Load Theory, aiming to enhance students’ geometric rigor while maintaining architectural relevance.
The findings indicate that mastering key mathematical concepts significantly enhances students’ creative capabilities, allowing for the conscious manipulation of complex forms. The authors conclude that teaching differential geometry to architectural engineering students is feasible, even for those without a strong mathematical background. By prioritizing visualization and application-centered tasks over abstract foundations, the course fosters creativity and integrates geometric knowledge into the students’ skill sets, ultimately preparing them to become innovative architects in the digital age.
Introduction
The introduction highlights a critical challenge in architectural engineering education, particularly in the context of the increasing reliance on artificial intelligence (AI) tools. It emphasizes the necessity for young architects to cultivate critical thinking skills that allow them to analyze and question the outputs of computer programs rather than accept them uncritically. The literature reviewed indicates that the development of geometrical thinking has been a focus in both secondary and higher education, with various studies underscoring its importance (Alalouch, 2018; Cocchiarella, 2006; Cumino et al., 2021; Kaufmann, 2009; Pék, 2024a; 2024b; Pinho, 2013; Uçar et al., 2023; van Merriënboer et al., 2024).
Historically, rigorous mathematical training, particularly in descriptive geometry, was essential for architects, as it directly influenced their ability to design even simple structures. However, the advent of freeform surfaces and algorithmic design has shifted this paradigm, making differential-geometric data—such as Gaussian curvature—integral not only for post-design analysis but also as active parameters in the design process. Consequently, the authors argue that a foundational understanding of differential geometry is crucial for future architects, enabling them to effectively engage with contemporary design software (e.g., Rhino and Grasshopper) in a manner that transcends mere usage, fostering a deeper mastery of geometric principles.
Results
The results of the course presented in this paper indicate a positive reception from students, with some pursuing further studies in PhD programs, viewing the course as a preparatory step. Several student projects exemplify the advanced competencies developed during the course, showcasing a range of surface types, including surfaces of revolution and generalized helical surfaces. For instance, one project involved reconstructing a model inspired by a futuristic building, requiring high-level geometric analysis and form-recognition skills. Another project demonstrated proficiency in form-finding through the use of ruled surfaces, such as cylinders and conoids, resulting in a quasi-freeform aesthetic.
Further examples illustrate the rigorous mathematical foundations applied in the projects, such as ensuring tangent continuity (C¹) in surface assemblies and managing complex intersections of surfaces. Notably, students exhibited significant technical proficiency, manipulating parameter domains and surface types with mathematical awareness. The originality and differential-geometric precision of the projects were particularly impressive, as students transitioned from basic geometric representations to more complex parametric designs using GeoGebra. This shift indicates a deeper understanding of the interplay between aesthetics and differential-geometric principles in architectural design.
Discussion
The discussion section of the research paper addresses the challenges of teaching differential geometry to architectural engineering students, highlighting the disparity in thought processes between mathematicians and architects. Mathematicians often emphasize abstract proofs and rigor, while architects excel in practical applications but may lack a deep understanding of the underlying geometric principles. The authors propose a course designed to strike a balance—providing sufficient depth in differential geometry while remaining visually engaging and applicable to architectural design. Key pedagogical strategies include developing students’ visual thinking and form recognition, utilizing Cognitive Scaffolding and Cognitive Load Theory to facilitate learning, and employing dynamic software like GeoGebra to enhance comprehension of curves and surfaces.
The course is structured around the Van Hiele model of geometric thinking, guiding students from basic visualization to higher levels of abstraction and rigor. The syllabus emphasizes a thorough exploration of surface types relevant to architecture, integrating theoretical knowledge with practical exercises that foster creativity and independent problem-solving. The authors advocate for a project-based approach, where students apply their learning through independent assignments that encourage experimentation with complex forms. Ultimately, the findings suggest that with appropriate pedagogical methods and tools, it is feasible to teach differential geometry effectively to future architects, thereby enhancing their creative capabilities and understanding of geometric concepts.
