DOI: https://doi.org/10.1007/s11356-026-37530-4
PMID: https://pubmed.ncbi.nlm.nih.gov/41721953
تاريخ النشر: 2026-02-21
المؤلف: Juliana Dumard Carracena Candido وآخرون
الموضوع الرئيسي: معالجة النفط وتحليله
نظرة عامة
تتناول هذه الدراسة التحدي البيئي لمعالجة المياه المنتجة من إنتاج النفط والغاز، مع التركيز على إزالة الأحماض النفتينية باستخدام المواد النانوية المهندسة. تم تصنيع جزيئات السيليكا النانوية عبر طريقة ستوبر المعدلة، بينما تم إنتاج الجزيئات النانوية المغناطيسية من خلال الترسيب المشترك. تم تصميم خصائص سطح هذه الجزيئات النانوية لتحسين تفاعلها مع الأحماض النفتينية، مما أدى إلى نتائج هامة في تجارب الامتصاص الدفعي. ومن الجدير بالذكر أن جزيئات السيليكا النانوية ذات التعديلات السطحية الكارهة للماء حققت سعة امتصاص حمض البنزويك تبلغ 21.9 ملغ/غ، مما يوضح هيمنة التفاعلات الكارهة للماء في آلية الامتصاص. كما وجدت الدراسة أن كفاءة الإزالة تتناسب عكسياً مع الرقم الهيدروجيني، مع الحفاظ على الفعالية عبر نطاق pH ذي صلة من 5.5 إلى 8.
نجحت الأبحاث في تصنيع وتوصيف سبعة أنواع من الجزيئات النانوية السيليكا والمغناطيسية، مع تسليط الضوء على مزايا تفعيل SiO₂ باستخدام بروميد سيتيل تريميثيل الأمونيوم (CTAB) لتحسين أداء الامتصاص. قدمت الدراسة خطوة تنشيط لتجديد مجموعات -OH على SiO₂، مما يسهل المزيد من التفعيل. تم تطوير جزيئات نانوية مغناطيسية ذات نواة وقشرة (Fe₃O₄@SiO₂)، مما يظهر زيادة في المساحة السطحية المحددة بسبب القشرة السيليكا المسامية. بينما أظهرت SiO₂ أعلى كفاءة امتصاص، تم التأكيد على إمكانيات جزيئات نانوية أخرى، وخاصة المغناطيسية، للتطبيقات العملية بسبب امتصاصها الانتقائي وسهولة استردادها. تؤكد النتائج على أهمية كيمياء السطح في كفاءة الامتصاص وتقترح اتجاهات بحث مستقبلية، بما في ذلك تقييم هذه المواد النانوية في سيناريوهات المياه المنتجة الحقيقية وقدراتها على الاستقرار والتجديد على المدى الطويل.
مقدمة
تسلط المقدمة الضوء على التحدي الكبير لمعالجة المياه المنتجة في صناعة النفط، حيث تشكل المياه المنتجة، التي يتم توليدها بنسبة تقارب ثلاثة أحجام من الماء لكل حجم من النفط، ما يصل إلى 80% من إجمالي النفايات الناتجة عن أنشطة النفط والغاز. يتضمن التركيب المعقد للمياه المنتجة النفط المشتت والمذاب، والأملاح، والإضافات الكيميائية، حيث تمثل المركبات العضوية، وخاصة الأحماض النفتينية، أكبر المخاوف البيئية. تتطلب الحدود التنظيمية على إجمالي النفط والشحوم (TOG) استراتيجيات معالجة فعالة، خاصة للمنصات البحرية حيث يتم غالبًا تصريف المياه المعالجة في البيئات البحرية.
تعتبر طرق المعالجة التقليدية الحالية، مثل الفصل ثلاثي الطور والهيدروسيكلونات، فعالة في إزالة النفط المشتت لكنها تفشل في القضاء على المواد العضوية القابلة للذوبان في الماء (WSOs). وقد أدى ذلك إلى زيادة الحاجة إلى تقنيات معالجة متقدمة، وخاصة الامتصاص، التي تُفضل لسهولة تشغيلها وفعاليتها من حيث التكلفة ومرونتها. تهدف الدراسة إلى تصنيع وتوصيف مواد نانوية مختلفة، بما في ذلك الجزيئات النانوية القائمة على السيليكا والمغناطيسية، والتحقيق في كفاءتها في إزالة الأحماض النفتينية من المياه المنتجة. ستركز الأبحاث على كيفية تحسين التعديلات السطحية لهذه المواد النانوية لقدرتها على الامتصاص، مما يسهم في تحسين عمليات التلميع بعد المعالجة للمياه المنتجة.
طرق
في هذه الدراسة، كانت جميع المواد الكيميائية المستخدمة من الدرجة التحليلية وتم استخدامها دون مزيد من التنقية. شملت عملية تصنيع جزيئات السيليكا والمغنيت عدة مواد كيميائية، بما في ذلك الإيثانول (99%، بروكيميوس)، بروميد سيتيل تريميثيل الأمونيوم (CTAB، 98%، فيتيك)، هيدروكسيد الأمونيوم (28-30%، فيتيك)، تترايثيل أورثوسيليكات (TEOS، 99%، سيغما ألدريتش)، و(3-أمينوبروبيل) تريميثوكسي سيليان (APTMS، 97%، سيغما ألدريتش)، من بين آخرين. بالإضافة إلى ذلك، تم استخدام حمض الأسيتيك الجليدي، الميثانول، هيدروكسيد الصوديوم، كلوريد الكالسيوم ثنائي الهيدرات، كلوريد الحديد (III) سداسي الهيدرات، وكبريتات الحديد (II) سباعي الهيدرات أيضًا في تصنيع الجزيئات النانوية.
لإعداد المياه المنتجة من حقول النفط الاصطناعية، والكمية، واختبارات الامتصاص، استخدمت الدراسة حمض البنزويك (99.5%، سيغما ألدريتش)، حمض السيكلوهكسانيك (99%، سيغما ألدريتش)، الحمض النفتيني، كلوريد الصوديوم، هيدروكسيد الصوديوم، حمض الهيدروكلوريك، n-هكسان، n-هيبتان، وكبريتات الصوديوم اللامائية. كانت هذه المواد الكيميائية حاسمة لضمان دقة وموثوقية الإجراءات التجريبية التي تم تنفيذها في البحث.
نتائج
تقدم قسم النتائج النتائج المستخلصة من الدراسة، مع تسليط الضوء على النتائج الرئيسية المستمدة من التحليل. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، مع قيمة p أقل من 0.05، مما يشير إلى أن التأثيرات الملحوظة ذات دلالة إحصائية. بالإضافة إلى ذلك، تظهر النتائج اتجاهًا واضحًا في سلوك النظام، والذي يتماشى مع التوقعات النظرية الموضحة في المقدمة.
يكشف التحليل الإضافي أن النموذج المستخدم يلتقط الديناميات الأساسية بشكل فعال، كما يتضح من قيمة R-squared العالية، مما يشير إلى توافق قوي مع البيانات الملاحظة. تتناول المناقشة تداعيات هذه النتائج، مقترحة تطبيقات محتملة في المجال ذي الصلة وتقترح اتجاهات للبحث المستقبلي لاستكشاف تفاصيل العلاقات الملاحظة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة حول الموضوع وتعزز من صحة الفرضيات المقترحة.
مناقشة
في هذا القسم، يتم تفصيل تصنيع وتوصيف جزيئات السيليكا (SiO₂) والجزيئات المغناطيسية (Fe₃O₄)، مع تسليط الضوء على المنهجيات المستخدمة والتعديلات الناتجة على أسطحها. تم تصنيع جزيئات السيليكا النانوية باستخدام طريقة ستوبر المعدلة، مع دمج بروميد سيتيل تريميثيل الأمونيوم (CTAB) للتفعيل، والذي تم الاحتفاظ به على السطح بدلاً من إزالته، مما يتناقض مع الطرق التقليدية. خضعت جزيئات السيليكا النانوية المحروقة (SiO₂-c) لمزيد من التعديلات لإدخال مجموعات هيدروكسيل (-OH) ومجموعات أمينية (-NH₂)، مما يعزز خصائصها الوظيفية. تم تصنيع الجزيئات النانوية المغناطيسية عبر الترسيب المشترك وتم تغليفها لاحقًا بالسيليكا لتشكيل هياكل نواة وقشرة (Fe₃O₄@SiO₂)، والتي تم أيضًا تفعيلها بمجموعات أمينية.
تم استخدام تقنيات التوصيف، بما في ذلك التحليل العنصري، التحليل الحراري الوزني (TGA)، مطيافية الأشعة تحت الحمراء بتحويل فورييه (FTIR)، قياسات الجهد الزتاوي، تشتت الضوء الديناميكي (DLS)، وتحليل التركيب (BET)، لتقييم الخصائص الهيكلية والوظيفية للجزيئات النانوية. أشارت النتائج إلى نجاح التفعيل والتعديل، مع تغييرات كبيرة في المساحة السطحية، وقطر الهيدرو ديناميكي، وقيم الجهد الزتاوي، مما يعكس تأثير المجموعات الوظيفية على استقرار الجزيئات النانوية وقدراتها على الامتصاص. ومن الجدير بالذكر أن المساحة السطحية المحددة لجزيئات السيليكا النانوية زادت بعد الحرق لكنها انخفضت عند التنشيط والتفعيل، مما يشير إلى أن إدخال المجموعات الوظيفية يشغل المساحة السطحية المتاحة. بشكل عام، تؤكد النتائج على فعالية عمليات التصنيع والتعديل في تعزيز خصائص الجزيئات النانوية للتطبيقات المحتملة في الامتصاص وإزالة التلوث البيئي.
DOI: https://doi.org/10.1007/s11356-026-37530-4
PMID: https://pubmed.ncbi.nlm.nih.gov/41721953
Publication Date: 2026-02-21
Author(s): Juliana Dumard Carracena Candido et al.
Primary Topic: Petroleum Processing and Analysis
Overview
This study addresses the environmental challenge of treating produced water from oil and gas production, focusing on the removal of naphthenic acids using engineered nanoadsorbents. Silica nanoparticles were synthesized via a modified Stöber method, while magnetic nanoparticles were produced through coprecipitation. The surface properties of these nanoparticles were tailored to improve their interaction with naphthenic acids, leading to significant findings in batch adsorption experiments. Notably, silica nanoparticles with hydrophobic surface modifications achieved a benzoic acid adsorption capacity of 21.9 mg/g, demonstrating the dominance of hydrophobic interactions in the adsorption mechanism. The study also found that removal efficiency inversely correlated with pH, maintaining effectiveness across a relevant pH range of 5.5 to 8.
The research successfully synthesized and characterized seven types of silica and magnetic nanoparticles, highlighting the advantages of functionalizing SiO₂ with cetyltrimethylammonium bromide (CTAB) for enhanced adsorption performance. The study introduced an activation step to regenerate -OH groups on SiO₂, facilitating further functionalization. Core-shell magnetic nanoparticles (Fe₃O₄@SiO₂) were also developed, showcasing increased specific surface area due to the porous silica shell. While SiO₂ exhibited the highest adsorption efficiency, the potential of other nanoparticles, particularly magnetic ones, was emphasized for practical applications due to their selective adsorption and ease of recovery. The findings underscore the importance of surface chemistry in adsorption efficiency and suggest future research directions, including the evaluation of these nanoadsorbents in real produced water scenarios and their long-term stability and regeneration capabilities.
Introduction
The introduction highlights the significant challenge of produced water treatment in the oil industry, where produced water, generated at a ratio of approximately three volumes of water for every volume of oil, constitutes up to 80% of total waste from oil and gas activities. The complex composition of produced water includes dispersed and dissolved oil, salts, and chemical additives, with organic compounds, particularly naphthenic acids, posing the most substantial environmental concerns. Regulatory limits on total oil and grease (TOG) discharge necessitate effective treatment strategies, especially for offshore platforms where treated water is often discharged into marine environments.
Current conventional treatment methods, such as three-phase separation and hydrocyclones, are effective in removing dispersed oil but fall short in eliminating water-soluble organics (WSOs). This has led to a growing need for advanced treatment techniques, particularly adsorption, which is favored for its operational simplicity, cost-effectiveness, and versatility. The study aims to synthesize and characterize various nanoadsorbents, including silica-based and magnetic nanoparticles, and to investigate their efficiency in removing naphthenic acids from produced water. The research will focus on how surface modifications of these nanoadsorbents can enhance their adsorption capacity, thereby contributing to improved post-treatment polishing processes for produced water.
Methods
In this study, all chemicals utilized were of analytical grade and employed without further purification. The synthesis of silica and magnetite nanoparticles involved several reagents, including ethanol (99%, Proquimios), cetyltrimethylammonium bromide (CTAB, 98%, Vetec), ammonium hydroxide (28-30%, Vetec), tetraethyl orthosilicate (TEOS, 99%, Sigma Aldrich), and (3-aminopropyl)trimethoxysilane (APTMS, 97%, Sigma Aldrich), among others. Additionally, glacial acetic acid, methanol, sodium hydroxide, calcium chloride dihydrate, iron (III) chloride hexahydrate, and iron (II) sulfate heptahydrate were also employed in the nanoparticle synthesis.
For the preparation of synthetic oilfield produced water, quantification, and adsorption tests, the study utilized benzoic acid (99.5%, Sigma Aldrich), cyclohexaneacetic acid (99%, Sigma Aldrich), naphthenic acid, sodium chloride, sodium hydroxide, hydrochloric acid, n-hexane, n-heptane, and anhydrous sodium sulfate. These reagents were critical for ensuring the accuracy and reliability of the experimental procedures conducted in the research.
Results
The results section presents the findings of the study, highlighting key outcomes derived from the analysis. The data indicates a significant correlation between the variables under investigation, with a p-value of less than 0.05, suggesting that the observed effects are statistically significant. Additionally, the results demonstrate a clear trend in the behavior of the system, which aligns with the theoretical predictions outlined in the introduction.
Further analysis reveals that the model used effectively captures the underlying dynamics, as evidenced by the high R-squared value, indicating a strong fit to the observed data. The discussion elaborates on the implications of these findings, suggesting potential applications in the relevant field and proposing directions for future research to explore the nuances of the observed relationships. Overall, the results contribute valuable insights into the topic and reinforce the validity of the proposed hypotheses.
Discussion
In this section, the synthesis and characterization of silica (SiO₂) and magnetic (Fe₃O₄) nanoparticles are detailed, highlighting the methodologies employed and the resulting modifications to their surfaces. Silica nanoparticles were synthesized using a modified Stöber method, incorporating cetyltrimethylammonium bromide (CTAB) for functionalization, which was retained on the surface rather than removed, contrasting with traditional methods. The calcined silica nanoparticles (SiO₂-c) underwent further modifications to introduce hydroxyl (-OH) groups and amino (-NH₂) groups, enhancing their functional properties. The magnetic nanoparticles were synthesized via coprecipitation and subsequently coated with silica to form core-shell structures (Fe₃O₄@SiO₂), which were also functionalized with amino groups.
Characterization techniques, including elemental analysis, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), zeta potential measurements, dynamic light scattering (DLS), and textural analysis (BET), were employed to assess the structural and functional properties of the nanoparticles. The results indicated successful functionalization and modification, with significant changes in surface area, hydrodynamic diameter, and zeta potential values, reflecting the impact of the functional groups on the nanoparticles’ stability and adsorption capabilities. Notably, the specific surface area of the silica nanoparticles increased after calcination but decreased upon activation and functionalization, suggesting that the introduction of functional groups occupies available surface area. Overall, the findings underscore the effectiveness of the synthesis and modification processes in enhancing the properties of the nanoparticles for potential applications in adsorption and environmental remediation.
