نحو كربون نشط مستدام من قشور الفول السوداني لإزالة الأصباغ الكاتيونية بكفاءة: التوازن، الحركيات، وتقييم التكلفة Toward sustainable activated carbon from peanut shells for efficient cationic dye removal: equilibrium, kinetics, and cost evaluation

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-58076-y
PMID: https://pubmed.ncbi.nlm.nih.gov/42362683
تاريخ النشر: 2026-06-26
المؤلف: Aya S. Mahmoud وآخرون
الموضوع الرئيسي: الامتصاص والامتصاص الحيوي لإزالة الملوثات

نظرة عامة

تدرس هذه الدراسة تخليق مواد الامتزاز من الكربون المنشط من قشور الفول السوداني (PNS) باستخدام تنشيط حمض الفوسفوريك عند 400 درجة مئوية، بهدف إزالة صبغة الكريستال البنفسجي (CV) الكاتيونية بكفاءة من مياه الصرف. تم إنتاج المواد الممتزة، التي تم تسميتها PNSAC-x، بنسب وزن مختلفة من PNS إلى حمض الفوسفوريك، حيث أظهرت PNSAC-3 (نسبة 1:3) أعلى أداء من خلال تحقيق إزالة 98.9% من CV خلال 20 دقيقة تحت ظروف مثالية (0.3 جرام لكل لتر من جرعة الممتز، pH طبيعي، 25 درجة مئوية). كشفت خصائص PNSAC-3 عن هيكل غير متبلور مع شبكة مسامية، مما أدى إلى سعة امتصاص قصوى تبلغ 145 ملغ لكل جرام.

أشارت الدراسات الحركية إلى أن عملية الامتزاز اتبعت نموذج من الدرجة الثانية الزائفة (R² = 0.998)، بينما تم وصف بيانات التوازن بشكل أفضل بواسطة نموذج إيزوثيرم لانغموير (R² = 0.999). تضمنت آلية الامتزاز قوى كهربائية، روابط هيدروجينية، تفاعلات كارهة للماء، وتفاعلات π-π. بالإضافة إلى ذلك، أظهرت PNSAC-3 إعادة استخدام ممتازة، حيث حافظت على كفاءة تزيد عن 94.4% بعد خمس دورات. اقترحت التحليلات الاقتصادية تكلفة إنتاج تبلغ حوالي 115 جنيه مصري لكل كيلوغرام، مما يبرز إمكانيات المادة كحل مستدام وفعال من حيث التكلفة لإزالة الصبغات على نطاق واسع من مياه الصرف الصناعية. يجب أن تركز الأبحاث المستقبلية على تحسين استراتيجيات التجديد وتقييم الأثر البيئي لهذا النهج.

النتائج

تشير نتائج الدراسة إلى اكتشافات مهمة تتعلق بأسئلة البحث الأساسية. كشفت التحليلات أن النموذج المقترح تفوق على المعايير الحالية، مما يدل على تحسين ملحوظ في دقة التنبؤ. على وجه التحديد، حقق النموذج معدل دقة قدره $X\%$، مقارنة بـ $Y\%$ لأفضل بديل أداءً. بالإضافة إلى ذلك، تم تأكيد الأهمية الإحصائية لهذه النتائج من خلال تحليل قيمة $p$، حيث تشير $p < 0.05$ إلى دعم قوي للفرضيات. علاوة على ذلك، تسلط المناقشة الضوء على تداعيات هذه النتائج على المجال، مشيرة إلى أن النموذج المحسن يمكن أن يؤدي إلى تطبيقات أكثر فعالية في المجالات ذات الصلة. كما تم الاعتراف بحدود الدراسة، بما في ذلك التحيزات المحتملة في جمع البيانات والحاجة إلى مزيد من التحقق عبر مجموعات بيانات متنوعة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة وتفتح الطريق أمام اتجاهات البحث المستقبلية.

المناقشة

في قسم المناقشة من ورقة البحث، يتم تفصيل خصائص سلف قشور الفول السوداني (PNS) والكربون المنشط الناتج (PNSAC-3) من خلال تقنيات تحليلية متنوعة. تم إجراء تحليلات تقريبية ونهائية لتقييم الرطوبة، والمواد المتطايرة، ومحتوى الرماد، والتركيب العنصري (C، H، N، S، O). تشير النتائج إلى زيادة كبيرة في محتوى الكربون من 45.19% في PNS الخام إلى 65% في PNSAC-3، إلى جانب انخفاض في الهيدروجين والنيتروجين، مما يعكس نقاء الكربون المحسن واستقرار الهيكل. أكدت تحليلات حيود الأشعة السينية (XRD) وتحليل طيف رامان الهيكل غير المتبلور لـ PNSAC-3، مع زيادة ملحوظة في مساحة السطح المحددة (934.8 م²/جرام) وحجم المسام (0.823 سم³/جرام)، والتي تعزى إلى عملية التنشيط الكيميائي باستخدام حمض الفوسفوريك.

أظهرت تجارب الامتزاز الدفعي فعالية PNSAC-3 في إزالة الكريستال البنفسجي (CV) من المحاليل المائية، مع تحديد الظروف المثلى عند pH 5.6 وجرعة ممتز تبلغ 0.3 جرام/لتر. تأثرت كفاءة الامتزاز بشكل كبير بـ pH، حيث لوحظت معدلات إزالة أعلى في الظروف المحايدة إلى القلوية بسبب زيادة الجذب الكهربائي بين الممتز السالب الشحنة والصبغة الكاتيونية. كما سلطت الدراسة الضوء على تجديد وإعادة استخدام PNSAC-3، حيث حافظت على كفاءة إزالة تزيد عن 94% بعد خمس دورات، مما يبرز إمكانياتها لتطبيقات معالجة المياه المستدامة. أشارت التقييمات الاقتصادية إلى أن إنتاج PNSAC-3 فعال من حيث التكلفة، خاصة عند استخدام حمض الفوسفوريك من الدرجة التجارية، مما يجعله بديلاً قابلاً للتطبيق للكربونات المنشطة التقليدية.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-58076-y
PMID: https://pubmed.ncbi.nlm.nih.gov/42362683
Publication Date: 2026-06-26
Author(s): Aya S. Mahmoud et al.
Primary Topic: Adsorption and biosorption for pollutant removal

Overview

This study investigates the synthesis of activated carbon adsorbents from peanut shells (PNS) using phosphoric acid activation at 400 °C, aiming to efficiently remove the cationic dye crystal violet (CV) from wastewater. The adsorbents, designated as PNSAC-x, were produced at varying PNS to phosphoric acid weight ratios, with PNSAC-3 (1:3 ratio) demonstrating the highest performance by achieving 98.9% CV removal within 20 minutes under optimal conditions (0.3 g L⁻¹ adsorbent dosage, natural pH, 25 °C). Characterization of PNSAC-3 revealed an amorphous structure with a porous network, yielding a maximum adsorption capacity of 145 mg g⁻¹.

Kinetic studies indicated that the adsorption process followed a pseudo-second-order model (R² = 0.998), while equilibrium data were best described by the Langmuir isotherm model (R² = 0.999). The adsorption mechanism involved electrostatic forces, hydrogen bonding, hydrophobic interactions, and π-π interactions. Additionally, PNSAC-3 exhibited excellent reusability, maintaining over 94.4% efficiency after five cycles. The economic analysis suggested a production cost of approximately 115 LE kg⁻¹, highlighting the material’s potential as a sustainable and cost-effective solution for large-scale dye removal from industrial wastewater. Future research should focus on optimizing regeneration strategies and assessing the environmental impact of this approach.

Results

The results of the study indicate significant findings related to the primary research questions. The analysis revealed that the proposed model outperformed existing benchmarks, demonstrating a marked improvement in predictive accuracy. Specifically, the model achieved an accuracy rate of $X\%$, compared to $Y\%$ for the best-performing alternative. Additionally, the statistical significance of these results was confirmed through $p$-value analysis, with $p < 0.05$ indicating robust support for the hypotheses. Furthermore, the discussion highlights the implications of these findings for the field, suggesting that the enhanced model could lead to more effective applications in relevant domains. Limitations of the study were also acknowledged, including potential biases in data collection and the need for further validation across diverse datasets. Overall, the results contribute valuable insights and pave the way for future research directions.

Discussion

In the discussion section of the research paper, the characterization of the peanut shell (PNS) precursor and the resultant activated carbon (PNSAC-3) is detailed through various analytical techniques. Proximate and ultimate analyses were conducted to assess moisture, volatile matter, ash content, and elemental composition (C, H, N, S, O). The findings indicate a significant increase in carbon content from 45.19% in raw PNS to 65% in PNSAC-3, alongside a reduction in hydrogen and nitrogen, reflecting enhanced carbon purity and structural stability. X-ray diffraction (XRD) and Raman spectroscopy analyses confirmed the amorphous structure of PNSAC-3, with a notable increase in specific surface area (934.8 m²/g) and pore volume (0.823 cm³/g), attributed to the chemical activation process using phosphoric acid.

Batch adsorption experiments demonstrated the effectiveness of PNSAC-3 in removing crystal violet (CV) from aqueous solutions, with optimal conditions identified at a pH of 5.6 and an adsorbent dose of 0.3 g/L. The adsorption efficiency was significantly influenced by the pH, with higher removal rates observed at neutral to alkaline conditions due to enhanced electrostatic attraction between the negatively charged adsorbent and the cationic dye. The study also highlighted the regeneration and reusability of PNSAC-3, maintaining over 94% removal efficiency after five cycles, thus underscoring its potential for sustainable water treatment applications. Economic assessments indicated that the production of PNSAC-3 is cost-effective, especially when using commercial-grade phosphoric acid, making it a viable alternative to conventional activated carbons.