نظام إدارة الطاقة الحرارية المدعوم بالتوأم الرقمي لتحسين عمليات التصنيع المستدامة Digital Twin-Enabled Thermal Energy Management System for Sustainable Manufacturing Process Optimization

شارك:
المجلة: International Journal of Industrial Engineering and Management، المجلد: 17، العدد: 1
DOI: https://doi.org/10.24867/ijiem-401
تاريخ النشر: 2026-03-01
المؤلف: Otabek Mukhitdinov وآخرون
الموضوع الرئيسي: التحول الرقمي في الصناعة

نظرة عامة

تقدم هذه الدراسة إطار عمل شامل للتوأم الرقمي (DT) مصمم لتطبيقات على نطاق المصنع، يدمج النماذج الحرارية المعتمدة على الفيزياء مع التعلم الآلي والتحسين متعدد الأهداف. ينسق الإطار بشكل فعال إدارة حرارة العمليات، واستعادة الحرارة المهدرة، والتخزين الحراري، والطاقة المتجددة في الموقع في الوقت الحقيقي عبر مرافق متنوعة. تشمل الإنجازات الرئيسية تطوير DT موثوق يدمج بيانات التتبع المباشر مع نماذج الفيزياء الحرارية، وتحليلات تنبؤية هجينة بدقة عالية، والتعاون في الوقت الحقيقي لتحسين استخدام الطاقة، والتكاليف، والانبعاثات. على مدى فترة 18 شهرًا عبر أربع مرافق، تحسنت كفاءة الطاقة الحرارية من 51.7% إلى 65.7%، وتم تقليل انبعاثات الكربون بنسبة 34% (ما يعادل 15,400 طن من ثاني أكسيد الكربون المخفف)، وبلغت وفورات التكاليف حوالي 2.8 مليون دولار أمريكي، مع فترة استرداد تبلغ 6.6 أشهر.

تؤكد النتائج على الآثار العملية للتنسيق على نطاق المصنع، الذي يسهل التآزر الذي لا يمكن تحقيقه من خلال الترقيات المعزولة. يسمح هذا النهج بأتمتة آمنة وتوصيات موثوقة للمشغلين من خلال دمج التحسين المدرك لعدم اليقين وقيود الجدوى. ومع ذلك، فإن قابلية تطبيق الدراسة محدودة بالمرافق الكبيرة والمجهزة جيدًا، وهناك حاجة إلى مزيد من البحث لتعزيز الوصول للمؤسسات الصغيرة والمتوسطة. تشمل الاتجاهات المستقبلية تطوير إطار عمل “DT-lite” لتقليل متطلبات كثافة المستشعرات واستكشاف خوارزميات التحكم المتقدمة، مثل التعلم العميق المعزز، لتحسين التكيف مع أسواق الطاقة الديناميكية.

مقدمة

تسلط المقدمة الضوء على الدور الحاسم لقطاع التصنيع العالمي في الناتج الاقتصادي، مشيرة إلى استهلاكه الكبير للطاقة، الذي يمثل حوالي 40% من استخدام الطاقة الصناعية في العمليات الحرارية. يشكل هذا الطلب العالي على الطاقة تحديات من حيث تكاليف التشغيل والأثر البيئي. تتناول الدراسة هذه التحديات من خلال تطوير توأم رقمي (DT) متكامل يجمع بين نماذج حرارية معتمدة على الفيزياء وتوقعات التعلم الآلي والتحسين متعدد الأهداف. تم تصميم هذا DT لتنسيق حرارة العمليات، واستعادة الحرارة المهدرة، والتخزين الحراري، والطاقة المتجددة في الموقع في الوقت الحقيقي عبر أربع مرافق تصنيع متنوعة.

أدى تنفيذ DT إلى توصيات جاهزة للمشغلين توازن بشكل فعال بين استهلاك الطاقة، وتكاليف التشغيل، والانبعاثات، متكيفًا مع ظروف الإنتاج والطقس المتغيرة. تشير النتائج إلى تحسينات كبيرة في كفاءة الطاقة الحرارية—حوالي 27% كفاءة أعلى—وانخفاض كبير في انبعاثات الكربون، مع انخفاض إجمالي يبلغ حوالي الثلث. تؤكد هذه الدراسة على مزايا التنسيق على مستوى النظام مقارنة بالترقيات المعزولة، مما يظهر جدوى التعاون في الوقت الحقيقي على نطاق المصنع باستخدام توأم رقمي هجيني يعتمد على الفيزياء والتعلم الآلي مع تحكم متعدد الأهداف مدرك لعدم اليقين، تم التحقق منه عبر عدة مواقع تصنيع.

الطرق

توضح قسم المنهجية التركيز الأساسي والقيود المحددة لأنظمة استعادة الحرارة المهدرة (WHR) التقليدية. عادةً ما تستخدم هذه الأنظمة أساليب معتمدة على الفيزياء، مثل المبادلات الحرارية ودورات رانكين العضوية (ORC)، التي تهدف إلى التقاط وإعادة استخدام حرارة العمليات من مصدر واحد أو محدود. ومع ذلك، تتميز بتصميم ثابت لا يتكيف مع التغيرات التشغيلية الديناميكية، مما يؤدي إلى فقدان الفرص للتحسين على مستوى النظام.

بالإضافة إلى ذلك، يناقش القسم طرق التحسين الخاصة بالعمليات التي تستخدم خوارزميات متعددة الأهداف لمهام مثل الجدولة، تهدف إلى تقليل استهلاك الطاقة لخطوط الإنتاج الفردية. بينما يمكن أن تعزز هذه الطرق الكفاءة المحلية، فإنها غالبًا ما تفتقر إلى التكامل مع أنظمة الطاقة الأخرى، مثل المصادر المتجددة، مما قد يؤدي إلى أداء دون المستوى على نطاق عالمي. علاوة على ذلك، يتم تسليط الضوء على استخدام التوائم الرقمية (DT) للمراقبة في الوقت الحقيقي والتصور لاستخدام الطاقة كنهج مبكر لمعالجة هذه القيود، على الرغم من أنها لا تزال تركز على عمليات محددة بدلاً من منظور نظام شامل.

النتائج

تُعرض نتائج الدراسة التي استمرت 24 شهرًا حول نظام إدارة الطاقة الحرارية المدعوم بالتوأم الرقمي بشكل منهجي، بدءًا من تقييم دقة التنبؤ للنماذج الأساسية المستخدمة. تعتبر هذه التحقق أمرًا حيويًا لتأسيس موثوقية توقعات النظام وقدراته التشغيلية. بعد ذلك، تحدد النتائج تحسينات كفاءة الطاقة التي تم تحقيقها عبر أربع مرافق تصنيع مشاركة، مما يبرز فعالية النظام المنفذ.

بالإضافة إلى ذلك، تقيم الدراسة التأثيرات الاقتصادية والبيئية الأوسع الناتجة عن هذه التحسينات في كفاءة الطاقة. لا تبرز هذه التحليل الشامل الفوائد التشغيلية لنظام إدارة الطاقة الحرارية فحسب، بل تؤكد أيضًا على مساهماته المحتملة في الاستدامة وتوفير التكاليف داخل قطاع التصنيع.

المناقشة

تؤكد قسم المناقشة في ورقة البحث على الحاجة الملحة لتعزيز كفاءة الطاقة الحرارية (TEE) في التصنيع، خاصة في سياق انبعاثات غازات الدفيئة العالمية وتقلب تكاليف الطاقة. يسلط الضوء على توافق مبادرات كفاءة الطاقة مع أطر الاستدامة، مثل رؤية السعودية 2030، التي تهدف إلى التنويع الصناعي والإنتاج المستدام. تنتقد الورقة الأساليب التقليدية لإدارة الحرارة التي تركز على تحسين المكونات المعزولة، وتجادل بأنها تتجاهل الإمكانية لتحقيق مكاسب كبيرة في الكفاءة من خلال التكامل الديناميكي للأنظمة الحرارية المترابطة. يتم الاعتراف باستراتيجيات رئيسية مثل استعادة الحرارة المهدرة (WHR) ودمج الطاقة المتجددة، ومع ذلك، فإن التحديات التي تطرحها طبيعتها المتغيرة تتطلب أنظمة تحكم متقدمة، والتي تسهلها تقنيات الصناعة 4.0، وخاصة أطر التوأم الرقمي (DT).

تقدم الدراسة توأم رقمي موثوق على نطاق المصنع يقوم بالتعاون في تحسين حرارة العمليات، واستعادة الحرارة المهدرة، والتخزين الحراري، والطاقة المتجددة في الوقت الحقيقي باستخدام إطار عمل هجيني يعتمد على الفيزياء والتعلم الآلي (ML). يعالج هذا النهج الفجوة الموجودة في الأدبيات بشأن أنظمة التوأم الرقمي المتكاملة والشاملة لإدارة الطاقة الحرارية عبر عمليات التصنيع المترابطة. تحدد البحث أهدافًا محددة، بما في ذلك تطوير توأم رقمي عالي الدقة، وتنفيذ نماذج هجينة للتحليلات التنبؤية، وتطبيق خوارزميات التحسين متعددة الأهداف لتعزيز كفاءة الطاقة، وتقليل التكاليف، وتقليل انبعاثات الكربون. تؤكد النتائج على إمكانيات نظام إدارة الطاقة الحرارية المدعوم بالتوأم الرقمي لتوفير رؤية شاملة لعمليات التصنيع، مما يعزز الاستدامة بما يتماشى مع مبادئ الصناعة 5.0.

Journal: International Journal of Industrial Engineering and Management, Volume: 17, Issue: 1
DOI: https://doi.org/10.24867/ijiem-401
Publication Date: 2026-03-01
Author(s): Otabek Mukhitdinov et al.
Primary Topic: Digital Transformation in Industry

Overview

This study presents a comprehensive digital-twin (DT) framework designed for plant-scale applications, integrating physics-based thermal models with machine learning and multi-objective optimization. The framework effectively coordinates process heat management, waste-heat recovery, thermal storage, and on-site renewable energy in real time across diverse facilities. Key achievements include the development of a validated DT that merges live telemetry with thermal physics models, hybrid predictive analytics with high accuracy, and real-time co-optimization of energy use, costs, and emissions. Over an 18-month period across four facilities, thermal energy efficiency improved from 51.7% to 65.7%, carbon emissions were reduced by 34% (equivalent to 15,400 tons of CO₂ abated), and cost savings reached approximately USD 2.8 million, with a payback period of 6.6 months.

The findings underscore the practical implications of plant-scale orchestration, which facilitates synergies unattainable through isolated upgrades. The approach allows for safe automation and reliable operator recommendations by incorporating uncertainty-aware optimization and feasibility constraints. However, the study’s applicability is limited to large, well-instrumented facilities, and further research is needed to enhance accessibility for small and medium-sized enterprises. Future directions include developing a “DT-lite” framework to reduce sensor density requirements and exploring advanced control algorithms, such as deep reinforcement learning, to improve adaptability to dynamic energy markets.

Introduction

The introduction highlights the critical role of the global manufacturing sector in economic output, noting its significant energy consumption, which accounts for approximately 40% of industrial energy use in thermal processes. This high energy demand poses challenges in terms of operational costs and environmental impact. The study addresses these challenges by developing an integrated Digital Twin (DT) that combines physics-based thermal models with machine learning forecasts and multi-objective optimization. This DT is designed to coordinate process heat, waste-heat recovery, thermal storage, and on-site renewable energy in real-time across four diverse manufacturing facilities.

The implementation of the DT resulted in operator-ready recommendations that effectively balanced energy consumption, operational costs, and emissions, adapting to varying production and weather conditions. The findings indicate substantial improvements in thermal energy efficiency—approximately 27% higher efficiency—and a significant reduction in carbon emissions, with an aggregate decrease of about one-third. This research underscores the advantages of system-level orchestration over isolated upgrades, showcasing the novelty of real-time co-optimization at the plant scale using a hybrid physics-machine learning digital twin with uncertainty-aware multi-objective control, validated across multiple manufacturing sites.

Methods

The methodology section outlines the primary focus and identified limitations of conventional waste heat recovery (WHR) systems. These systems typically employ physics-based approaches, such as heat exchangers and Organic Rankine Cycles (ORC), which are designed to capture and reuse process heat from a single or limited source. However, they are characterized by a static design that fails to adapt to dynamic operational changes, leading to missed opportunities for system-wide optimization.

Additionally, the section discusses process-specific optimization methods that utilize multi-objective algorithms for tasks like scheduling, aimed at minimizing energy consumption for individual production lines. While these methods can enhance localized efficiency, they often lack integration with other energy systems, such as renewable sources, which can result in suboptimal performance on a global scale. Furthermore, the use of digital twins (DT) for real-time monitoring and visualization of energy use is highlighted as an early approach to address these limitations, although it remains focused on specific processes rather than a holistic system perspective.

Results

The results of the 24-month study on the DT-enabled thermal energy management system are systematically presented, beginning with an evaluation of the predictive accuracy of the core models employed. This validation is crucial for establishing the reliability of the system’s forecasts and operational capabilities. Following this, the findings quantify the improvements in energy efficiency achieved across the four participating manufacturing facilities, highlighting the effectiveness of the implemented system.

Additionally, the study assesses the broader economic and environmental impacts resulting from these energy efficiency enhancements. This comprehensive analysis not only underscores the operational benefits of the thermal energy management system but also emphasizes its potential contributions to sustainability and cost savings within the manufacturing sector.

Discussion

The discussion section of the research paper emphasizes the critical need for enhancing Thermal Energy Efficiency (TEE) in manufacturing, particularly in the context of global greenhouse gas emissions and energy cost volatility. It highlights the alignment of energy efficiency initiatives with sustainability frameworks, such as Saudi Arabia’s Vision 2030, which aims for industrial diversification and sustainable production. The paper critiques traditional thermal management approaches that focus on isolated component optimization, arguing that they overlook the potential for significant efficiency gains through the dynamic integration of interconnected thermal systems. Key strategies like Waste Heat Recovery (WHR) and renewable energy integration are acknowledged, yet the challenges posed by their variable nature necessitate advanced control systems, which are facilitated by Industry 4.0 technologies, particularly Digital Twin (DT) frameworks.

The study introduces a validated, plant-scale DT that co-optimizes process heat, waste-heat recovery, thermal storage, and renewable energy in real-time using a hybrid physics-Machine Learning (ML) framework. This approach addresses the existing gap in literature regarding comprehensive, integrated DT systems for thermal energy management across interconnected manufacturing processes. The research outlines specific objectives, including the development of a high-fidelity DT, the implementation of hybrid models for predictive analytics, and the application of multi-objective optimization algorithms to enhance energy efficiency, reduce costs, and minimize carbon emissions. The findings underscore the potential of a DT-enabled thermal energy management system to provide a holistic view of manufacturing operations, thereby advancing sustainability in line with Industry 5.0 principles.