نظرية موحدة للتدرج في تأثير السقوط: القوى وقطر الانتشار الأقصى
Unifying Theory of Scaling in Drop Impact: Forces and Maximum Spreading Diameter

شارك:
المجلة: Physical Review Letters، المجلد: 134، العدد: 10
DOI: https://doi.org/10.1103/physrevlett.134.104003
PMID: https://pubmed.ncbi.nlm.nih.gov/40153629
تاريخ النشر: 2025-03-11
المؤلف: Vatsal Sanjay وآخرون
الموضوع الرئيسي: ديناميات السوائل وانتقال الحرارة

نظرة عامة

تناقش هذه القسم ديناميات تأثير القطرات على الأسطح الصلبة، مع التركيز على تأثير سرعة القطرات، وحجمها، وخصائص المواد على الخصائص الرئيسية مثل القوة المطبقة على السطح ونصف القطر الأقصى للانتشار. تركز الدراسة على فهم كيفية اعتماد هذه الخصائص على معلمين تحكم بلا أبعاد: رقم ويبر ($W_e$)، الذي يمثل الطاقة الحركية غير البعدية، ورقم أونيسورغ ($Oh$)، الذي يشير إلى اللزوجة غير البعدية.

يجري المؤلفون محاكاة عددية مباشرة عبر نطاق واسع من المعلمات ($1 \leq W_e \leq 10^3$ و$10^{-3} \leq Oh \leq 10^2$) ويطورون إطارًا نظريًا مستوحى من نظرية غروسمان-لوهس لتوربينات الجدران. يسمح هذا الإطار بتفكيك معدلات فقدان الطاقة خلال عملية التأثير إلى مراحل متميزة، يهيمن عليها آليات فيزيائية مختلفة. تلتقط النظرية الناتجة بشكل فعال اعتماديات القوة القصوى للتأثير وقطر الانتشار على كل من $W_e$ و$Oh$، بينما تكشف أيضًا عن الدور الكبير لفقدان اللزوجة أثناء التأثير، حتى بالنسبة للقطرات ذات اللزوجة المنخفضة، مما يتحدى الافتراضات السابقة في هذا المجال.

مقدمة

في هذا القسم، يصف المؤلفون الإطار الحسابي المستخدم لدراسة عملية تأثير القطرات، مستفيدين من التناظر المحوري الخاص بها لتبسيط المحاكاة. يتم تصوير المجال المحوري في الشكل 1، مع وجود محور التناظر عند \( r = 0 \). تم تصميم المجال ليكون كبيرًا بما يكفي، تحديدًا \( L_{\text{max}} \gg D_0 \) (مع \( L_{\text{max}} = 8D_0 \) في الحالات القصوى)، لتخفيف تأثيرات الحدود على ديناميات التأثير.

تم تعريف شروط الحدود بدقة: عند الركيزة (حيث \( y = 0 \))، يتم فرض شروط عدم الانزلاق وعدم الاختراق للسرعة، إلى جانب شرط تدرج عمودي صفري للضغط. لمحاكاة سطح غير مبلل، يتم الحفاظ على طبقة هواء رقيقة بين القطرات والركيزة عن طريق ضبط حجم السائل (VoF) المتتبع \( \Psi = 0 \) عند الجدار. على الرغم من أن هذه الطريقة لا تحل بالكامل الديناميات المجهرية داخل طبقة الهواء، إلا أنها تلتقط بشكل فعال السلوك الماكروسكوبي لتأثيرات القطرات على الأسطح فائقة الكارهة للماء. يتم تطبيق شروط التدفق عند الحدود العلوية والجانبية، مما يسمح بخروج الهواء بحرية خلال حدث التأثير.

مناقشة

في هذا القسم، يناقش المؤلفون الإطار الحسابي والأساليب المستخدمة لتحليل ديناميات تأثير قطرة على ركيزة غير مبللة. تستخدم الدراسة مجالًا حسابيًا محوريًا مع شروط حدود تضمن تأثيرًا ضئيلًا على عملية تأثير القطرات. تشمل المقاييس الرئيسية قطر الانتشار الأقصى \(D_{\text{max}}\) والقوة العمودية القصوى \(F_{\text{max}}\)، والتي يتم التنبؤ بها من خلال إجمالي فقدان اللزوجة لكل وحدة كتلة، المحدد كـ \(E_d(t) = \int_0^{t_0} \epsilon(t) dt\)، حيث تمثل \(\epsilon(t)\) معدل فقدان اللزوجة. يستخدم المؤلفون تمييز الحجم المحدود على شبكة متداخلة، مما يضمن دقة من الدرجة الثانية، ويستخدمون تحسين الشبكة التكيفية لالتقاط تدرجات السرعة العالية بشكل فعال.

تُفصّل إجراءات الانحدار لتحديد \(F_{\text{max}}\) و\(D_{\text{max}}\)، مع التعبير عن الأول كدالة لرقم ويبر \(W_e\) ورقم أونيسورغ \(Oh\). يتم نمذجة القوة القصوى للتأثير باستخدام نهج انحدار متعدد الخطوات يأخذ في الاعتبار الأنظمة الحركية واللزجة، مما يؤدي إلى التعبير \(F_{\text{max}} = \rho V_0^2 D_0^2 \left(0.81 + \frac{1.6}{W_e} + \text{terms involving } Oh\right)\). بالمثل، يتم اشتقاق قطر الانتشار الأقصى من تحليل الانحدار الذي يتضمن فقدانًا غير بعدي ومعاملات خاصة بالنظام، مما يؤدي إلى التعبير \(D_{\text{max}} = D_0 \left(\alpha_0 + \alpha_1 W_e \frac{1 – E_d(t=\tau_s)}{V_0^2}\right)\). يؤكد المؤلفون على أهمية وظائف الانتقال السلس لنمذجة السلوك عبر أنظمة التدفق المختلفة، مما يعزز القدرة التنبؤية لنموذجهم.

القيود

تسلط قيود هذه الدراسة الضوء على انهيار الافتراض المحوري عند أرقام ويبر العالية (We ≳ 100 لقطرات الماء وأعلى بكثير للسوائل الأكثر لزوجة)، مما يمكن أن يؤدي إلى عدم الاستقرار بواسطة الغاز المحيط أثناء الرش. يؤثر هذا الظاهرة بشكل كبير على سعة الذروة الثانية للقوة المؤثرة؛ ومع ذلك، فإنه لا يغير القوة القصوى مباشرة بعد التأثير. بالإضافة إلى ذلك، تستبعد التحليل القطرات الصغيرة التي يتم طردها بسبب عدم استقرار ما بعد الغشاء، والتي يمكن أن تؤثر على قطر الانتشار الأقصى.

علاوة على ذلك، بينما نموذج طبقة الهواء الرقيقة يحاكي بشكل فعال سطحًا غير مبلل مثالي، فإنه لا يأخذ في الاعتبار بالكامل الديناميات المجهرية داخل الفيلم الهوائي، خاصة عندما يقترب سمكه من حجم حرج يبلغ حوالي \(10\Delta\). على الرغم من هذه القيود، تم التحقق من صحة النموذج لتمثيل سلوك التأثير الماكروسكوبي بدقة ضمن نطاق المعلمات ذات الصلة. أكواد مصدر المحاكاة الخاصة بالدراسة ونصوص المعالجة اللاحقة متاحة للجمهور على GitHub، مما يعزز إمكانية التكرار والبحث الإضافي في هذا المجال.

Journal: Physical Review Letters, Volume: 134, Issue: 10
DOI: https://doi.org/10.1103/physrevlett.134.104003
PMID: https://pubmed.ncbi.nlm.nih.gov/40153629
Publication Date: 2025-03-11
Author(s): Vatsal Sanjay et al.
Primary Topic: Fluid Dynamics and Heat Transfer

Overview

This section discusses the dynamics of droplet impact on rigid surfaces, emphasizing the influence of droplet velocity, size, and material properties on key characteristics such as the force exerted on the surface and the maximum spreading radius. The study focuses on understanding how these characteristics depend on two dimensionless control parameters: the Weber number ($W_e$), which represents non-dimensionalized kinetic energy, and the Ohnesorge number ($Oh$), indicating dimensionless viscosity.

The authors conduct direct numerical simulations across a broad parameter range ($1 \leq W_e \leq 10^3$ and $10^{-3} \leq Oh \leq 10^2$) and develop a theoretical framework inspired by the Grossmann-Lohse theory for wall-bounded turbulence. This framework allows for the decomposition of energy dissipation rates during the impact process into distinct phases, each dominated by different physical mechanisms. The resulting theory effectively captures the dependencies of the maximum impact force and spreading diameter on both $W_e$ and $Oh$, while also revealing the significant role of viscous dissipation during impact, even for low-viscosity droplets, challenging previous assumptions in the field.

Introduction

In this section, the authors describe the computational framework employed to study the drop impact process, utilizing its inherent axisymmetry to streamline simulations. The axisymmetric domain is depicted in Figure 1, with the axis of symmetry located at \( r = 0 \). The domain is designed to be sufficiently large, specifically \( L_{\text{max}} \gg D_0 \) (with \( L_{\text{max}} = 8D_0 \) in extreme cases), to mitigate boundary effects on the dynamics of the impact.

Boundary conditions are meticulously defined: at the substrate (where \( y = 0 \)), no-slip and non-penetration conditions for velocity are enforced, alongside a zero normal gradient condition for pressure. To simulate a non-wetting surface, a thin air layer is maintained between the drop and the substrate by setting the Volume of Fluid (VoF) tracer \( \Psi = 0 \) at the wall. Although this method does not fully resolve the microscopic dynamics within the air layer, it effectively captures the macroscopic behavior of drop impacts on superhydrophobic surfaces. Outflow conditions are applied at the top and side boundaries, allowing for the free exit of air during the impact event.

Discussion

In this section, the authors discuss the computational framework and methodologies employed to analyze the impact dynamics of a drop on a non-wetting substrate. The study utilizes an axisymmetric computational domain with boundary conditions that ensure minimal influence on the drop’s impact process. Key metrics include the maximum spreading diameter \(D_{\text{max}}\) and the maximum normal force \(F_{\text{max}}\), which are predicted through the total viscous dissipation per unit mass, defined as \(E_d(t) = \int_0^{t_0} \epsilon(t) dt\), where \(\epsilon(t)\) represents the viscous dissipation rate. The authors employ a finite volume discretization on a staggered grid, ensuring second-order accuracy, and utilize adaptive mesh refinement to capture high-velocity gradients effectively.

The regression procedures for determining \(F_{\text{max}}\) and \(D_{\text{max}}\) are detailed, with the former expressed as a function of the Weber number \(W_e\) and the Ohnesorge number \(Oh\). The maximum impact force is modeled using a multi-step regression approach that accounts for inertial and viscous regimes, resulting in the expression \(F_{\text{max}} = \rho V_0^2 D_0^2 \left(0.81 + \frac{1.6}{W_e} + \text{terms involving } Oh\right)\). Similarly, the maximum spreading diameter is derived from a regression analysis that incorporates dimensionless dissipation and regime-specific coefficients, leading to the expression \(D_{\text{max}} = D_0 \left(\alpha_0 + \alpha_1 W_e \frac{1 – E_d(t=\tau_s)}{V_0^2}\right)\). The authors emphasize the importance of smooth transition functions to model the behavior across different flow regimes, enhancing the predictive capability of their model.

Limitations

The limitations of this study highlight the breakdown of the axisymmetric assumption at high Weber numbers (We ≳ 100 for water drops and even higher for more viscous fluids), which can lead to destabilization by the surrounding gas during splashing. This phenomenon significantly affects the second peak amplitude of the impacting force; however, it does not alter the maximal force immediately following impact. Additionally, the analysis excludes smaller droplets ejected due to post-lamella destabilization, which could influence the maximum spreading diameter.

Moreover, while the thin air layer model effectively simulates an ideal non-wetting surface, it does not fully account for the microscopic dynamics within the air film, particularly when its thickness approaches a critical size of approximately \(10\Delta\). Despite these limitations, the model has been validated to accurately represent macroscopic impact behavior within the relevant parameter range. The study’s simulation source codes and post-processing scripts are publicly accessible on GitHub, promoting reproducibility and further research in this area.