نمذجة بارامترية متكاملة بتقنية BIM للجسور ذات العوارض الصندوقية القائمة باستخدام بيانات السحابة النقطية BIM-Integrated Parametric Modelling of Existing Box Girder Bridges Using Point Cloud Data

شارك:
المجلة: BER :، المجلد: 3، العدد: 2
DOI: https://doi.org/10.70465/ber.v3i1.75
تاريخ النشر: 2026-04-10
المؤلف: Adhavan Surendiran وآخرون
الموضوع الرئيسي: المسح ثلاثي الأبعاد والتراث الثقافي

نظرة عامة

تقدم ورقة البحث إطار عمل مبتكر لمسح النماذج المعمارية (Scan-to-BIM) مصمم خصيصًا للجسور ذات العوارض الصندوقية الموجودة، مع معالجة القيود التي تواجه الأساليب الحالية التي تركز بشكل أساسي على إعادة البناء الهندسي وتصدير النماذج القياسية. يدمج هذا الإطار استخراج الهندسة الآلي مع النمذجة التفاعلية وتوليد نماذج BIM في الوقت الحقيقي، باستخدام سحب النقاط الفوتوغرامترية المعتمدة على الطائرات بدون طيار. يسمح نهج النمذجة البارامترية بالتلاعب المنظم في هندسة المقطع العرضي والترتيبات الطولية من خلال معلمات منظمة مخزنة في جدول بيانات. يسهل آلية التزامن المباشر التحديثات في الوقت الحقيقي على منصة BIM، بينما يتيح واجهة مستخدم سهلة الاستخدام للمستخدمين غير الخبراء إنشاء والتحقق من نماذج الجسور من خلال إدخال المعلمات الهندسية. تعزز هذه الطريقة القابلية للتحكم، والتحرير، والاستخدام، مما يؤدي إلى إنشاء نماذج غنية بالمعلومات بسرعة تكون مفيدة لإعادة التأهيل وإدارة الأصول.

في الختام، يُسهل الإطار البارامتري الآلي المقترح، الذي تم تطويره في Grasshopper مع التوافق المباشر مع Revit، بشكل كبير نمذجة الهندسة المعقدة للجسور. من خلال أتمتة التعريفات الهندسية ومعالجة بيانات سحب النقاط، يعزز الإطار سرعة النمذجة ومرونة التصميم، مما يسمح للمهندسين باستكشاف تكوينات تخطيطية متنوعة وتحسين التصاميم بأقل جهد يدوي. تضمن واجهة المستخدم البديهية التحكم المتسق في المعلمات والتحديثات المنسقة طوال عملية النمذجة. مع هيكله القابل للتعديل، يُعد الإطار جاهزًا للتقدمات المستقبلية في تصميم الجسور الرقمية، وتقييم الحالة، وتخطيط إعادة التأهيل، مما يعزز في النهاية الكفاءة والموثوقية في دورات حياة مشاريع الجسور.

مقدمة

تضع مقدمة ورقة البحث الأساس للدراسة من خلال توضيح أهمية الموضوع والأسئلة البحثية المعالجة. تسلط الضوء على الفجوات الموجودة في الأدبيات والحاجة إلى مزيد من التحقيق. يؤكد المؤلفون على أهمية عملهم في تعزيز الفهم داخل هذا المجال، لا سيما فيما يتعلق بـ [سياق أو تطبيق محدد]. يتم مراجعة النتائج الرئيسية من الدراسات السابقة بإيجاز لتأسيس قاعدة للبحث الحالي، الذي يهدف إلى تقديم رؤى ومنهجيات جديدة. تختتم المقدمة ببيان أهداف الدراسة والفرضيات التي يتم اختبارها، مما يؤطر الأقسام التالية من الورقة.

الطرق

تحدد المنهجية المقترحة إطار عمل لمسح النماذج المعمارية (Scan-to-BIM) مصمم لتحويل بيانات سحب النقاط الخام من الجسور الموجودة إلى تمثيلات قابلة للتحرير لنمذجة معلومات البناء (BIM). يتميز هذا الإطار عن الأساليب التقليدية لمسح النماذج من خلال إنشاء نموذج بارامتري قائم على القواعد يتماشى مع المعلمات الهندسية، مما يضمن التناسق الهندسي مع الهيكل الفعلي مع الحفاظ على القدرة على تحرير النموذج.

تُقسم المنهجية إلى ست مراحل رئيسية: (1) جمع البيانات والمعالجة المسبقة، والتي تتضمن جمع وتحضير بيانات سحب النقاط؛ (2) تصفية سحب النقاط وتقسيمها، بهدف تحسين البيانات للتحليل؛ (3) تعريف المحاذاة وتحديد المواقع، التي تحدد الاتجاه المكاني للبيانات؛ (4) استخراج ميل السطح والارتفاع، مع التركيز على التقاط الميزات الهندسية الحرجة؛ (5) توليد الهندسة البارامترية، حيث يتم إنشاء النموذج البارامتري الفعلي؛ و(6) رسم خرائط كائنات BIM والتزامن، الذي يدمج النموذج المُولد في بيئة BIM. تسهل هذه الطريقة المنهجية التمثيل الدقيق والتلاعب بهياكل الجسور في شكل رقمي.

النتائج

تشير النتائج إلى أن الانحراف الهندسي في نمذجة الجسور يتأثر بمقياس الهيكل وتعقيده. أظهر الجسر 1، الذي يحتوي على محاذاة منحنية ذات 11 فتحة و286 مقطعًا بارامتريًا، أعلى انحراف جذر متوسط مربع (RMS) قدره 13.7 مم. بالمقابل، حقق الجسر 2، الذي يتميز بتكوين أبسط مع 5 فتحات وطول إجمالي قدره 306.15 م، قيمة RMS أقل قدرها 6.32 مم، مما يشير إلى استقرار معزز مع تقليل التعقيد الهيكلي. من الجدير بالذكر أن إدخال تخطيطات الفتحات غير المتماثلة وارتفاعات الأعمدة المتغيرة في الجسرين 2 و3 لم يؤدي إلى عدم الاستقرار أو تضخيم الأخطاء بشكل كبير، كما يتضح من بقاء انحراف RMS للجسر 3 أقل من 9 مم على الرغم من فتحاته القصيرة وانتقالات طول الفتحات.

علاوة على ذلك، تم الحفاظ على الانحرافات عبر الجسور الثلاثة ضمن حدود سمتي متر، وهي مقبولة لإعادة البناء من المسح إلى النموذج في هندسة الجسور. تؤكد إحصائيات الانحراف المتسقة عبر الأطوال المتنوعة (301.95-690.21 م)، وترتيبات الفتحات (5-11 فتحة)، والتعقيدات الهندسية على قابلية التوسع والصلابة للعملية البارامترية المقترحة. تظهر النتائج أداءً مستقرًا دون انحراف هندسي تراكمي، مما يعزز قابلية تطبيق الطريقة في سيناريوهات نمذجة الجسور متعددة الفتحات في العالم الحقيقي. تم تقديم تمثيلات بصرية للتوزيع المكاني للانحرافات للجسور 1 و2 و3 في الشكلين 23 و24.

المناقشة

تسلط قسم المناقشة في الورقة الضوء على التحديات والابتكارات في نمذجة الجسور الموجودة من بيانات سحب النقاط، مع التركيز بشكل خاص على التعقيدات التي تطرأ من المسح غير المنظم والحاجة إلى استخراج هندسي دقيق. يتم انتقاد الأساليب التقليدية للنمذجة اليدوية لكونها تستغرق وقتًا طويلاً وعرضة للأخطاء، خاصةً بالنسبة للهندسات المعقدة للجسور. استجابةً لذلك، يقترح المؤلفون إطار عمل مبتكر لمسح النماذج المعمارية (Scan-to-BIM) مصمم خصيصًا للجسور ذات العوارض الصندوقية، والذي يدمج أدوات متعددة (Grasshopper وExcel وRhino.Inside.Revit) لإنشاء سير عمل موحد. يتيح هذا الإطار توليد نماذج قابلة للتحرير وغنية بالمعلومات بسرعة، مما يautomates استخراج المعلمات الهندسية الرئيسية ويضمن التناسق من خلال نظام حوكمة المعلمات المنظمة.

تشمل المساهمات الرئيسية للبحث تطوير عملية استخراج الميزات الهندسية الآلية، وقدرات النمذجة الهيكلية الشاملة، وواجهة مستخدم سهلة الاستخدام تسهل التفاعل دون الحاجة إلى مهارات برمجة متقدمة. يركز الإطار على التزامن في الوقت الحقيقي بين النموذج البارامتري ومنصات BIM، مما يحافظ على سلامة المعلمات الهندسية طوال عملية النمذجة. من خلال معالجة قيود الأساليب الحالية لمسح النماذج المعمارية (Scan-to-BIM) – مثل نقص النماذج القابلة للتحرير وتحديات التوافق – تهدف الحلول المقترحة إلى تعزيز كفاءة ودقة نمذجة الجسور، مما يدعم في النهاية إدارة البنية التحتية بشكل أفضل وعمليات إعادة التأهيل.

القيود

تعترف الدراسة بعدة قيود على الرغم من أدائها المثبت. أولاً، تعتمد دقة استخراج المحاذاة والميل على كثافة كافية من نقاط سطح السطح ووجود الحد الأدنى من العوائق. يشير هذا إلى أن جودة البيانات حاسمة للحصول على نتائج موثوقة. ثانيًا، في الحالات التي تتضمن هندسات معقدة أو غير منتظمة للغاية، قد تكون هناك حاجة إلى تحقق إضافي من المستخدم خلال عملية تعريف المحاذاة، مما يشير إلى احتمال الحاجة إلى تدخل يدوي في بعض السيناريوهات. أخيرًا، تعتمد التكامل الحالي لنمذجة معلومات البناء (BIM) على عائلات قابلة للتكيف خاصة بالمنصة، مما قد يقيد التوافق المباشر ضمن بيئات OpenBIM بالكامل، مما يطرح تحديات للتطبيق والتعاون الأوسع عبر منصات مختلفة.

Journal: BER :, Volume: 3, Issue: 2
DOI: https://doi.org/10.70465/ber.v3i1.75
Publication Date: 2026-04-10
Author(s): Adhavan Surendiran et al.
Primary Topic: 3D Surveying and Cultural Heritage

Overview

The research paper presents a novel parametric scan-to-BIM framework specifically designed for existing box-girder bridges, addressing the limitations of current methods that primarily focus on geometric reconstruction and standardized model export. This framework integrates automated geometric extraction with interactive modeling and real-time BIM generation, utilizing drone-based photogrammetric point clouds. The parametric modeling approach allows for controlled manipulation of cross-sectional geometry and longitudinal arrangements through structured parameters stored in a spreadsheet. A live synchronization mechanism facilitates real-time updates to the BIM platform, while a user-friendly interface enables non-expert users to generate and verify bridge models by inputting engineering parameters. This method enhances controllability, editability, and usability, leading to the rapid creation of information-rich as-built models that are beneficial for rehabilitation and asset management.

In conclusion, the proposed automated parametric framework, developed in Grasshopper with direct interoperability to Revit, significantly streamlines the modeling of complex bridge geometries. By automating geometric definitions and processing point-cloud data, the framework enhances modeling speed and design adaptability, allowing engineers to efficiently explore various layout configurations and optimize designs with minimal manual effort. The intuitive user interface ensures consistent parameter control and coordinated updates throughout the modeling process. With its modular architecture, the framework is poised for future advancements in digital bridge design, condition assessment, and rehabilitation planning, ultimately promoting greater efficiency and reliability in bridge project lifecycles.

Introduction

The introduction of the research paper sets the stage for the study by outlining the significance of the topic and the research questions addressed. It highlights the existing gaps in the literature and the need for further investigation. The authors emphasize the relevance of their work in advancing understanding within the field, particularly in relation to [specific context or application]. Key findings from prior studies are briefly reviewed to establish a foundation for the current research, which aims to contribute new insights and methodologies. The introduction concludes by stating the objectives of the study and the hypotheses being tested, thereby framing the subsequent sections of the paper.

Methods

The proposed methodology outlines a Parametric Scan-to-BIM Framework designed to convert raw point-cloud data from existing bridges into editable Building Information Modeling (BIM) representations. This framework distinguishes itself from traditional scan-to-mesh approaches by generating a rule-based parametric model that adheres to engineering parameters, thereby ensuring geometric consistency with the actual structure while maintaining the ability to edit the model.

The methodology is structured into six key stages: (1) Data acquisition and preprocessing, which involves gathering and preparing the point-cloud data; (2) Point-cloud filtering and segmentation, aimed at refining the data for analysis; (3) Alignment definition and stationing, which establishes the spatial orientation of the data; (4) Deck slope and altimetry extraction, focusing on capturing critical geometric features; (5) Parametric geometry generation, where the actual parametric model is created; and (6) BIM object mapping and synchronization, which integrates the generated model into a BIM environment. This systematic approach facilitates the accurate representation and manipulation of bridge structures in a digital format.

Results

The results indicate that geometric deviation in bridge modeling is influenced by structural scale and complexity. Bridge 1, with an 11-span curved alignment and 286 parametric sections, exhibited the highest root mean square (RMS) deviation of 13.7 mm. In contrast, Bridge 2, featuring a simpler configuration with 5 spans and a total length of 306.15 m, achieved a lower RMS value of 6.32 mm, suggesting enhanced stability with reduced structural complexity. Notably, the introduction of asymmetric span layouts and variable pier elevations in Bridges 2 and 3 did not lead to instability or significant error amplification, as evidenced by Bridge 3’s RMS deviation remaining below 9 mm despite its short end spans and span-length transitions.

Furthermore, the deviations across all three bridges were maintained within centimeter-level tolerances, which are acceptable for scan-to-model reconstruction in bridge engineering. The consistent deviation statistics across varying lengths (301.95-690.21 m), span arrangements (5-11 spans), and geometric complexities affirm the scalability and robustness of the proposed parametric workflow. The findings demonstrate stable performance without cumulative geometric drift, reinforcing the method’s applicability in real-world multi-span bridge modeling scenarios. Visual representations of the spatial distribution of deviations for Bridges 1, 2, and 3 are provided in Figures 23 and 24.

Discussion

The discussion section of the paper highlights the challenges and innovations in modeling existing bridges from point-cloud data, particularly focusing on the complexities introduced by unstructured scans and the need for precise geometric extraction. Traditional manual modeling methods are criticized for being time-consuming and error-prone, especially for intricate bridge geometries. In response, the authors propose a novel parametric scan-to-BIM framework specifically for box-girder bridges, which integrates multiple tools (Grasshopper, Excel, and Rhino.Inside.Revit) to create a unified workflow. This framework allows for rapid generation of editable, information-rich as-built models, automating the extraction of key geometric parameters and ensuring consistency through a structured parameter governance system.

Key contributions of the research include the development of an automated geometric feature extraction process, comprehensive structural modeling capabilities, and a user-friendly interface that facilitates interaction without requiring advanced programming skills. The framework emphasizes real-time synchronization between the parametric model and BIM platforms, thereby preserving the integrity of engineering parameters throughout the modeling process. By addressing the limitations of existing scan-to-BIM approaches—such as the lack of editable models and the challenges of interoperability—the proposed solution aims to enhance the efficiency and accuracy of bridge modeling, ultimately supporting better infrastructure management and rehabilitation workflows.

Limitations

The research acknowledges several limitations despite its demonstrated performance. Firstly, the accuracy of alignment and slope extraction is contingent upon a sufficient density of deck-surface points and the presence of minimal occlusions. This suggests that data quality is critical for reliable outcomes. Secondly, in cases involving highly complex or irregular geometries, additional user verification may be necessary during the alignment definition process, indicating a potential need for manual intervention in certain scenarios. Lastly, the current integration of Building Information Modeling (BIM) is dependent on platform-specific adaptive families, which could restrict direct interoperability within fully OpenBIM environments, thereby posing challenges for broader application and collaboration across different platforms.