DOI: https://doi.org/10.1038/s41598-026-47887-8
PMID: https://pubmed.ncbi.nlm.nih.gov/41968176
تاريخ النشر: 2026-04-12
المؤلف: Kadir Erol وآخرون
الموضوع الرئيسي: الامتصاص والامتصاص الحيوي لإزالة الملوثات
نظرة عامة
تقدم البحث هلامًا مائيًا ماكرو مسامي يتكون من بولي (2-هيدروكسي إيثيل ميثاكريلات-جليكيدي ميثاكريلات) (بولي (HEMA-GMA))، مُوظفًا مع بولي (L-لايسين) (PLL) وأيونات Cu(II)، بهدف الإزالة الفعالة لصبغة الأنيون الحمض الأزرق 113 من المحاليل المائية. تم تخليق الهلام من خلال بلمرة الكريو الحرة عند -20 درجة مئوية، تلاها زراعة PLL عبر فتح الحلقة الإيبوكسيدية وتنسيق أيونات Cu(II) مع مجموعات الأمين في PLL. كشفت خصائص المجهر الإلكتروني الماسح (SEM) عن هيكل ماكرو مسامي متصل بشكل كبير، بينما أشار تحليل برونور-إيميت-تيلر (BET) إلى مساحات سطحية محددة تتراوح بين 6.45 إلى 7.85 م² ج⁻¹ وأقطار مسام متوسطة تتراوح بين 36 إلى 41 نانومتر.
سلطت دراسات الامتصاص على دفعات الضوء على اعتماد قوي على الرقم الهيدروجيني، حيث حدثت أفضل امتصاص للصبغة عند الرقم الهيدروجيني 4.0، محققة سعة قصوى قدرها 501.6 ملغ ج⁻¹ خلال 30 دقيقة، مما يدل على حركية سريعة. كانت عملية الامتصاص موصوفة بشكل أفضل بواسطة نموذج الحركية من الدرجة الثانية الزائفة، وبيانات التوازن تتوافق مع إيزوثيرم لانغموير، مما يشير إلى امتصاص أحادي الطبقة على مواقع نشطة موحدة. علاوة على ذلك، أظهر الهلام المائي المُوظف بأيونات Cu(II) خصائص مضادة للبكتيريا كبيرة ضد مجموعة متنوعة من البكتيريا موجبة وسالبة الجرام. تؤكد هذه النتائج على إمكانيات الهلام كمادة فعالة لمعالجة مياه الصرف الصحي المتقدمة، تجمع بين سعة امتصاص عالية، وحركية سريعة، ونشاط مضاد للميكروبات.
مقدمة
تسلط المقدمة الضوء على التحديات البيئية والصحية التي تطرحها الأصباغ الاصطناعية، وخاصة الحمض الأزرق 113 (AB113)، الذي يتواجد بشكل شائع في صناعات مثل تصنيع النسيج. الطبيعة المستمرة لـ AB113، سميته، ومقاومته للتحلل الحيوي تعقد إزالته من مياه الصرف الصحي، مما يستلزم طرق معالجة فعالة. غالبًا ما تتكبد الطرق التقليدية، مثل التجلط-التخثر والأكسدة المتقدمة، تكاليف عالية وتولد نفايات ثانوية، مما يدفع نحو تقنيات الامتصاص. يُلاحظ أن الامتصاص يتمتع بمرونته، وكفاءته العالية في الإزالة، وإمكانية تجديد المواد الممتصة، حيث تعتمد فعاليته بشكل كبير على خصائص الممتص، بما في ذلك كيمياء السطح والمسامية.
ركزت الأبحاث على مجموعة متنوعة من المواد الممتصة، بما في ذلك الكربون المنشط والمواد الحيوية منخفضة التكلفة المستمدة من النفايات الزراعية، والتي أظهرت سعات متفاوتة لإزالة AB113 تأثرت بعوامل مثل الرقم الهيدروجيني ودرجة الحرارة. ومع ذلك، لا تزال التحديات قائمة في فصل الجسيمات واستدامة الأداء. أظهرت التطورات الأخيرة في تكنولوجيا المواد الممتصة، وخاصة تطوير الكربونات المسامية، والبوليمرات المُوظفة، والمركبات الهجينة، تحسين كفاءة الامتصاص من خلال كيمياء السطح المصممة والمسامية الهرمية. من بين هذه الابتكارات، تبرز الهلامات المائية – الشبكات البوليمرية الماكرو مسامية التي تم إنشاؤها عبر بلمرة الكريو – لقدرتها السريعة على الامتصاص ومقاومتها الهيدروليكية المنخفضة، خاصة عند توظيفها مع روابط محددة لتعزيز الانتقائية للملوثات المستهدفة.
طرق
يستعرض قسم “المواد والطرق” تصميم التجربة والإجراءات المستخدمة في الدراسة. يوضح المواد المستخدمة، بما في ذلك الكواشف المحددة، والمعدات، وأي عينات بيولوجية، لضمان تكرار التجارب. تشمل المنهجية التقنيات المطبقة لجمع البيانات وتحليلها، مثل الاختبارات الإحصائية، والنماذج الحاسوبية، أو بروتوكولات المختبر، والتي تعتبر حاسمة للتحقق من النتائج.
بالإضافة إلى ذلك، قد يصف القسم إعداد التجربة، بما في ذلك ظروف التحكم والدوافع وراء المنهجيات المختارة. يضمن هذا النهج الشامل أن البحث يلتزم بمعايير علمية صارمة، مما يسمح بتفسير دقيق للنتائج ويسهل الدراسات المستقبلية في هذا المجال.
نتائج
تظهر نتائج الدراسة تعزيزًا كبيرًا في قدرة احتباس الماء (WRC) لهياكل الهلام بعد التعديلات الكيميائية. أظهر بولي (HEMA-GMA) الأصلي قدرة احتباس ماء قدرها 308.7%، تُعزى إلى مجموعاته الهيدروكسيلية المحبة للماء وهندسته الماكرو مسامية. بعد التعديل مع بولي-L-لايسين (PLL)، زادت قدرة احتباس الماء إلى 367.2%، ويرجع ذلك أساسًا إلى إدخال مجموعات الأمين التي تسهل الروابط الهيدروجينية مع الماء وتعزز الانتفاخ الأسموزي. تساهم الطبيعة المرنة لسلاسل PLL أيضًا في امتصاص الماء مع الحفاظ على الهيكل المسامي للهلام.
كانت أعلى قيمة لقدرة احتباس الماء المسجلة هي 381.5% لنوع بولي (HEMA-GMA)-PLL-Cu(II)، مما يشير إلى أن تنسيق أيونات Cu(II) مع مجموعات الأمين في PLL يؤدي إلى تحسين احتباس الماء. من المحتمل أن يؤدي هذا التنسيق إلى تعديلات هيكلية محلية وتشكيل قشور ترطيب إضافية، مما يسمح بزيادة احتباس الماء داخل شبكة الهلام. من المهم أن غياب انخفاض في قدرة احتباس الماء يشير إلى أن تفاعل أيونات المعادن لا يؤدي إلى تشابك مفرط أو انهيار المسام. بشكل عام، تؤكد النتائج على نجاح تعديل الهلامات، مما يبرز زيادة محبته للماء وإمكانية تطبيقه في العمليات المعتمدة على امتصاص الماء ونقل الكتلة في البيئات المائية.
مناقشة
في هذا القسم المناقشة، يبرز المؤلفون تطوير مادة ممتصة جديدة من الهلام، بولي (HEMA-GMA)-PLL-Cu(II)، مصممة للإزالة الفعالة لصبغة الأزوت السلفونية المستمرة AB113 من المحاليل المائية. يستفيد الهلام من هيكل بولي (2-هيدروكسي إيثيل ميثاكريلات) (بوليHEMA) المحب للماء الذي تم تفاعله مع جليكيدي ميثاكريلات (GMA)، مما يقدم مجموعات الإيبوكسيد لوصلات الروابط الوظيفية. يعزز إدخال بولي (L-لايسين) (PLL) البيئة الكاتيونية، مما يسهل التفاعلات الكهروستاتيكية مع الصبغة السالبة الشحنة، بينما يقدم إضافة أيونات Cu(II) مواقع ربط تنسيقية يمكن أن تحسن بشكل كبير من التقاط الصبغة، خاصة في المصفوفات المائية المعقدة حيث قد تعيق القوة الأيونية التفاعلات الكهروستاتيكية.
يؤكد المؤلفون أنه بينما ركزت الدراسات السابقة بشكل أساسي على الآليات الكهروستاتيكية لامتصاص الصبغة، فإن دمج أوضاع التفاعل المتعددة – الكهروستاتيكية، الروابط الهيدروجينية، والتنسيق – داخل إطار الهلام من المتوقع أن يعزز استقرار وكفاءة الامتصاص. لا يهدف هذا النهج متعدد الأوضاع فقط إلى تحسين حركية الامتصاص والسعة، بل يعالج أيضًا التحديات المتعلقة بالاستعمار الميكروبي والتلوث الحيوي، والتي يمكن أن تؤثر على أداء المواد الممتصة في تطبيقات معالجة مياه الصرف الصحي. بشكل عام، تقدم الدراسة تقدمًا كبيرًا في تصميم المواد الممتصة من الهلام، تجمع بين المسامية الهيكلية، وكثافة الروابط العالية، وكيمياء التنسيق المعدنية لتحسين إزالة الأصباغ السالبة من الماء.
DOI: https://doi.org/10.1038/s41598-026-47887-8
PMID: https://pubmed.ncbi.nlm.nih.gov/41968176
Publication Date: 2026-04-12
Author(s): Kadir Erol et al.
Primary Topic: Adsorption and biosorption for pollutant removal
Overview
The research presents a macroporous cryogel composed of Poly(2-Hydroxyethyl methacrylate-glycidyl methacrylate) (Poly(HEMA-GMA)), functionalized with Poly(L-lysine) (PLL) and Cu(II) ions, aimed at the effective removal of the anionic dye Acid Blue 113 from aqueous solutions. The cryogel was synthesized through free-radical cryopolymerization at -20 °C, followed by PLL grafting via epoxy ring-opening and Cu(II) ion coordination with PLL amine groups. Characterization via scanning electron microscopy (SEM) revealed a highly interconnected macroporous structure, while Brunauer-Emmett-Teller (BET) analysis indicated specific surface areas of 6.45 to 7.85 m² g⁻¹ and average pore diameters of 36 to 41 nm.
Batch adsorption studies highlighted a strong pH dependence, with optimal dye adsorption occurring at pH 4.0, achieving a maximum capacity of 501.6 mg g⁻¹ within 30 minutes, indicative of rapid kinetics. The adsorption process was best described by the pseudo-second-order kinetic model, and equilibrium data conformed to the Langmuir isotherm, suggesting monolayer adsorption on uniform active sites. Furthermore, the Cu(II)-functionalized cryogel demonstrated significant antibacterial properties against various Gram-positive and Gram-negative bacteria. These results underscore the cryogel’s potential as an effective material for advanced wastewater treatment, combining high adsorption capacity, swift kinetics, and antimicrobial activity.
Introduction
The introduction highlights the environmental and health challenges posed by synthetic dyes, particularly Acid Blue 113 (AB113), which is prevalent in industries like textile manufacturing. AB113’s persistent nature, toxicity, and resistance to biodegradation complicate its removal from wastewater, necessitating effective treatment methods. Traditional approaches, such as coagulation-flocculation and advanced oxidation, often incur high costs and generate secondary waste, prompting a shift towards adsorption techniques. Adsorption is noted for its flexibility, high removal efficiency, and potential for regenerating adsorbents, with the effectiveness largely dependent on the adsorbent’s properties, including surface chemistry and porosity.
Research has focused on various adsorbents, including activated carbons and low-cost biosorbents derived from agricultural waste, which have shown varying capacities for AB113 removal influenced by factors like pH and temperature. However, challenges remain in particle separation and performance sustainability. Recent advancements in adsorbent technology, particularly the development of porous carbons, functionalized polymers, and hybrid composites, have demonstrated improved adsorption efficiency through tailored surface chemistry and hierarchical porosity. Among these innovations, cryogels—macroporous polymer networks created via cryopolymerization—stand out for their rapid adsorption capabilities and low hydraulic resistance, especially when functionalized with specific ligands to enhance selectivity for targeted pollutants.
Methods
The “Materials and Methods” section outlines the experimental design and procedures employed in the study. It details the materials used, including specific reagents, equipment, and any biological samples, ensuring reproducibility of the experiments. The methodology encompasses the techniques applied for data collection and analysis, such as statistical tests, computational models, or laboratory protocols, which are crucial for validating the findings.
Additionally, the section may describe the experimental setup, including control conditions and the rationale behind the chosen methodologies. This comprehensive approach ensures that the research adheres to rigorous scientific standards, allowing for accurate interpretation of results and facilitating future studies in the field.
Results
The results of the study demonstrate a significant enhancement in water retention capacity (WRC) of cryogel structures following chemical modifications. The pristine Poly(HEMA-GMA) exhibited a WRC of 308.7%, attributed to its hydrophilic hydroxyl groups and macroporous architecture. Upon modification with poly-L-lysine (PLL), the WRC increased to 367.2%, primarily due to the introduction of amino groups that facilitate hydrogen bonding with water and enhance osmotic swelling. The flexible nature of PLL chains further contributes to water uptake while preserving the cryogel’s porous structure.
The highest WRC value recorded was 381.5% for the Poly(HEMA-GMA)-PLL-Cu(II) variant, indicating that the coordination of Cu(II) ions with PLL amino groups leads to improved water retention. This coordination likely induces local structural modifications and the formation of additional hydration shells, allowing for greater water immobilization within the cryogel network. Importantly, the absence of a decrease in WRC suggests that the chelation of metal ions does not lead to excessive crosslinking or pore collapse. Overall, the findings confirm the successful modification of the cryogels, highlighting their enhanced hydrophilicity and potential applicability in processes reliant on water adsorption and mass transfer in aqueous environments.
Discussion
In this discussion section, the authors highlight the development of a novel cryogel adsorbent, Poly(HEMA-GMA)-PLL-Cu(II), designed for the effective removal of the persistent sulfonated azo dye AB113 from aqueous solutions. The cryogel leverages a hydrophilic Poly(2-Hydroxyethyl methacrylate) (PolyHEMA) backbone copolymerized with glycidyl methacrylate (GMA), which introduces epoxide groups for functional ligand attachment. The incorporation of Poly(L-lysine) (PLL) enhances the cationic environment, facilitating electrostatic interactions with the negatively charged dye, while the addition of Cu(II) ions introduces coordination binding sites that can significantly improve dye capture, particularly in complex aqueous matrices where ionic strength may hinder electrostatic interactions.
The authors emphasize that while previous studies primarily focused on electrostatic mechanisms for dye adsorption, the integration of multiple interaction modes—electrostatic, hydrogen bonding, and coordination—within the cryogel framework is expected to enhance adsorption stability and efficiency. This multimodal approach not only aims to improve the adsorption kinetics and capacity but also addresses challenges related to microbial colonization and biofouling, which can compromise the performance of adsorbents in wastewater treatment applications. Overall, the study presents a significant advancement in the design of cryogel adsorbents, combining structural porosity, high ligand density, and metal coordination chemistry to optimize the removal of anionic dyes from water.
