DOI: https://doi.org/10.1038/s41598-026-43463-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42026119
تاريخ النشر: 2026-04-23
المؤلف: Huda Yahya Maky وآخرون
الموضوع الرئيسي: المواد والأجهزة الحرارية الكهربائية المتقدمة
نظرة عامة
تبحث الدراسة في الأداء الكهروحراري لشريط الجرافين النانوي ذو الحواف المستقيمة (AGNRs)، مع التركيز على تأثيرات عيوب الفراغ والتشويب بالنحاس (Cu). باستخدام طريقة هوكل الموسعة بالتزامن مع صيغة دالة غرين غير التوازنية (NEGF)، تجد الدراسة أن إدخال عيوب الفراغ يقلل من كل من فجوة الطاقة والموصلية الحرارية الصوتية، مما يعزز الكفاءة الكهروحرارية. ومن الجدير بالذكر أن التشويب بالنحاس بتركيز منخفض، وخاصة التشويب بذرّة واحدة، يحسن بشكل كبير من الموصلية الكهربائية ومعامل سيبيك، محققًا قيمة قصوى من المعيار ($ZT$) تتجاوز 1.5 عند درجة حرارة الغرفة. ومع ذلك، فإن مستويات التشويب الأعلى تقلل من معامل سيبيك وتزيد من الخسائر الحرارية الإلكترونية، مما يبرز أهمية التحكم الدقيق في تركيز وموضع الشوائب.
في الختام، تظهر النتائج أن الأداء الكهروحراري لـ AGNRs يمكن تحسينه بشكل كبير من خلال إدخال عيوب الفراغ بشكل استراتيجي والتشويب بالنحاس. تكشف الدراسة عن هياكل إلكترونية محسّنة وعوامل طاقة محسّنة في AGNRs المتضررة مع تشويب النحاس بتركيز منخفض، مما يؤكد العلاقة غير الخطية بين تركيز الشوائب والأداء الكهروحراري. تساهم هذه الرؤى في فهم ظواهر النقل في الأنظمة الكربونية ذات الأبعاد المنخفضة وتوفر إرشادات عملية لتطوير أجهزة كهروحرارية نانوية فعالة لتطبيقات جمع الطاقة والإلكترونيات منخفضة الطاقة. تشمل اتجاهات البحث المستقبلية التحقق التجريبي واستكشاف التشويب متعدد العناصر أو هندسة الإجهاد لتعزيز الكفاءة الكهروحرارية بشكل أكبر.
طرق
في هذه الدراسة، تم استخدام إطار محاكاة موجه نحو الهندسة لتقييم الأداء الكهروحراري لشريط الجرافين النانوي ذو الحواف المستقيمة، بهدف تطبيقه في جمع الطاقة على النطاق النانوي وأنظمة إدارة الطاقة الصغيرة. تم تصميم نهج النمذجة خصيصًا لمحاكاة ظروف التشغيل الواقعية النموذجية للأنظمة الإلكترونية والمضمنة، حيث تعمل الوحدات الكهروحرارية المدمجة تحت تدرجات حرارية وتكون مقيدة بمساحات سطحية محدودة. يسمح هذا المنهج بتقييم شامل لفعالية الشرائط النانوية في التطبيقات العملية.
نتائج
تكشف نتائج هذه الدراسة حول الخصائص الكهروحرارية لشريط الجرافين النانوي ذو الحواف المستقيمة (AGNRs) المشوبة بالنحاس والمُعرضة لعيوب الفراغ عن تقدم كبير لتطبيقات جمع الطاقة في الهندسة الكهربائية. تشير تحليل هيكل النطاق الإلكتروني إلى انخفاض كبير في فجوة الطاقة من حوالي 1.5 eV في AGNRs النقية إلى أقل من 0.12 eV في التكوينات المشوبة بثلاث ذرات من النحاس. يعزز هذا التضييق من توليد الحاملات عند تدرجات حرارية منخفضة، وهو أمر حاسم لتوليد الطاقة الكهروحرارية الفعالة (TEGs). يؤدي إدخال الشوائب النحاسية وعيوب الفراغ إلى ظهور حالات في منتصف الفجوة، مما يعزز عدم التماثل في كثافة الحالات حول مستوى فيرمي، وبالتالي تحسين معامل سيبيك وتسهيل نقل الحاملات المعتمد على الطاقة.
تسلط الدراسة أيضًا الضوء على التوازن بين الموصلية الكهربائية والموصلية الحرارية، حيث تظهر النتائج أنه بينما تزداد الموصلية الكهربائية مع التشويب بالنحاس، تنخفض الموصلية الحرارية الصوتية بسبب زيادة تشتت الفونونات الناتج عن العيوب. يؤدي ذلك إلى موصلية حرارية إجمالية مواتية تدعم تحويل الطاقة الكهروحرارية بشكل فعال. ومن الجدير بالذكر أن قيم المعيار (ZT) تتجاوز 1.5 في التكوينات المحسّنة، مما يشير إلى إمكانية استخدام AGNRs المشوبة بالنحاس في التطبيقات الكهروحرارية العملية. تؤكد الأبحاث على أهمية وضع الشوائب بشكل استراتيجي والتحكم في العيوب لتعظيم الأداء الكهروحراري، مما يجعل هذه الهياكل النانوية مناسبة للتكامل في أنظمة الإلكترونيات منخفضة الطاقة والأجهزة المستقلة.
مناقشة
تؤكد قسم المناقشة في ورقة البحث على الاهتمام المتزايد في المواد الكهروحرارية (TE)، وخاصة شرائط الجرافين النانوية (GNRs)، لجمع الطاقة المستدامة وإدارة الحرارة في الميكروإلكترونيات. يتميز كفاءة هذه المواد بقيمة المعيار غير البعدية، $ZT$، التي تتأثر بعوامل مثل معامل سيبيك ($S$)، الموصلية الكهربائية ($G_e$)، والموصلية الحرارية ($\kappa$). بينما تقدم الجرافين النقي تحديات بسبب فجوة الطاقة الصفرية وموصلية حرارية عالية، أظهرت التقدمات الأخيرة في هندسة GNRs من خلال التشويب وإدخال العيوب – تحديدًا، التشويب بالنحاس (Cu) وعيوب الفراغ على المستوى الذري – وعدًا في تعزيز أدائها الكهروحراري. يمكن أن تؤدي هذه التعديلات إلى تقليل فجوة الطاقة، وتحسين الموصلية الكهربائية، وزيادة معامل سيبيك، خاصة عند تركيزات منخفضة من الشوائب.
توضح الورقة أيضًا الإطار الحسابي المستخدم لتحليل تأثيرات هذه التعديلات على الخصائص الكهروحرارية لشريط الجرافين النانوي ذو الحواف المستقيمة (AGNRs). من خلال استخدام طريقة هوكل الموسعة مع صيغة دالة غرين غير التوازنية، تحقق الدراسة في التفاعل بين هندسة العيوب، وتركيز الشوائب، ومعايير TE مثل $ZT$ وعامل الطاقة (PF). تشير النتائج إلى أن التركيبة المثلى من عيوب الفراغ والتشويب بالنحاس يمكن أن تؤدي إلى قيم $ZT$ تتجاوز 1.5 عند درجة حرارة الغرفة، مما يبرز أهمية التحكم الدقيق في موضع الشوائب لتحقيق توازن بين معامل سيبيك والموصلية. لا تعزز هذه الأبحاث فقط فهم ظواهر النقل في الأنظمة الكربونية ذات الأبعاد المنخفضة، بل توفر أيضًا إرشادات عملية لتطوير أجهزة كهروحرارية نانوية فعالة لتطبيقات استعادة الطاقة وإدارة الحرارة في الإلكترونيات ذات الكثافة العالية. يُقترح أن تشمل الأعمال المستقبلية التحقق التجريبي واستكشاف استراتيجيات التشويب متعدد العناصر لتحسين الكفاءة الكهروحرارية بشكل أكبر.
DOI: https://doi.org/10.1038/s41598-026-43463-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42026119
Publication Date: 2026-04-23
Author(s): Huda Yahya Maky et al.
Primary Topic: Advanced Thermoelectric Materials and Devices
Overview
The research investigates the thermoelectric performance of armchair graphene nanoribbons (AGNRs), focusing on the effects of vacancy defects and copper (Cu) doping. Utilizing the extended Hückel method in conjunction with nonequilibrium Green’s function (NEGF) formalism, the study finds that introducing vacancy defects reduces both the bandgap and phononic thermal conductance, enhancing thermoelectric efficiency. Notably, low-concentration Cu doping, particularly single-atom doping, significantly improves electrical conductance and the Seebeck coefficient, achieving a peak figure of merit ($ZT$) exceeding 1.5 at room temperature. However, higher doping levels diminish the Seebeck coefficient and increase electronic thermal losses, underscoring the importance of precise control over dopant concentration and placement.
In conclusion, the findings demonstrate that the thermoelectric performance of AGNRs can be substantially enhanced through strategic vacancy defect introduction and Cu doping. The study reveals optimized electronic structures and improved power factors in defected AGNRs with low-concentration Cu doping, confirming the non-linear relationship between doping concentration and thermoelectric performance. These insights contribute to the understanding of transport phenomena in low-dimensional carbon systems and provide practical guidelines for developing efficient nanoscale thermoelectric devices for applications in energy harvesting and low-power electronics. Future research directions include experimental validation and exploration of multi-element doping or strain engineering to further enhance thermoelectric efficiency.
Methods
In this study, an engineering-oriented simulation framework was utilized to assess the thermoelectric performance of armchair graphene nanoribbons, aiming for their application in nanoscale energy harvesting and micro-power management systems. The modeling approach was specifically tailored to simulate realistic operational conditions typical of electronic and embedded systems, where compact thermoelectric modules function under temperature gradients and are constrained by limited surface areas. This methodology allows for a comprehensive evaluation of the nanoribbons’ effectiveness in practical applications.
Results
The results of this study on thermoelectric properties of armchair graphene nanoribbons (AGNRs) doped with copper and subjected to vacancy defects reveal significant advancements for energy harvesting applications in electrical engineering. The electronic band structure analysis indicates a substantial reduction in the bandgap from approximately 1.5 eV in pristine AGNRs to as low as 0.12 eV in triple-Cu-doped configurations. This narrowing enhances carrier generation at low thermal gradients, crucial for efficient on-chip thermoelectric generators (TEGs). The introduction of copper dopants and vacancy defects leads to the emergence of mid-gap states, which enhance the asymmetry of the density of states around the Fermi level, thereby improving the Seebeck coefficient and facilitating energy-dependent carrier transport.
The study also highlights the balance between electrical conductance and thermal conductance, with findings showing that while electrical conductance increases with Cu doping, phononic thermal conductance decreases due to enhanced phonon scattering from defects. This results in a favorable total thermal conductance that supports effective thermoelectric energy conversion. Notably, the figure of merit (ZT) values exceed 1.5 in optimized configurations, indicating the potential of Cu-doped AGNRs for practical thermoelectric applications. The research underscores the importance of strategic dopant placement and defect control in maximizing thermoelectric performance, making these nanostructures suitable for integration into low-power electronic systems and autonomous devices.
Discussion
The discussion section of the research paper emphasizes the growing interest in thermoelectric (TE) materials, particularly graphene nanoribbons (GNRs), for sustainable energy harvesting and thermal management in microelectronics. The efficiency of these materials is characterized by the dimensionless figure of merit, $ZT$, which is influenced by factors such as the Seebeck coefficient ($S$), electrical conductance ($G_e$), and thermal conductance ($\kappa$). While pristine graphene presents challenges due to its zero bandgap and high thermal conductance, recent advancements in engineering GNRs through doping and defect introduction—specifically, copper (Cu) doping and atomic-scale vacancy defects—have shown promise in enhancing their thermoelectric performance. These modifications can lower the bandgap, improve electrical conductance, and increase the Seebeck coefficient, particularly at low dopant concentrations.
The paper further details the computational framework employed to analyze the effects of these modifications on the thermoelectric properties of armchair graphene nanoribbons (AGNRs). By utilizing an extended Hückel method combined with the Non-Equilibrium Green’s Function formalism, the study investigates the interplay between defect geometry, dopant concentration, and TE metrics such as $ZT$ and power factor (PF). The findings indicate that the optimal combination of vacancy defects and Cu doping can lead to $ZT$ values exceeding 1.5 at room temperature, highlighting the importance of precise control over dopant placement to balance the Seebeck coefficient and conductance. This research not only enhances the understanding of transport phenomena in low-dimensional carbon systems but also provides practical guidelines for developing efficient nanoscale thermoelectric devices for applications in energy recovery and thermal management in high-density electronics. Future work is suggested to include experimental validation and exploration of multi-element doping strategies to further optimize thermoelectric efficiency.
