هياكل V2O5 المدعمة بالحديد-التنجستين مع تعزيز توليد الفراغات الأكسجينية لتحلل الصبغات الضوئي Fe-W co-doped V2O5 nanostructures with enhanced oxygen vacancy generation for photocatalytic dye degradation

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-44277-y
PMID: https://pubmed.ncbi.nlm.nih.gov/41974766
تاريخ النشر: 2026-04-13
المؤلف: Akanksha Malik وآخرون
الموضوع الرئيسي: تقنيات التحفيز الضوئي المتقدمة

نظرة عامة

تبحث هذه الدراسة في تخليق وخصائص جزيئات نانوية من V₂O₅ المخلوطة بخفيفة من الحديد (Fe) والتنجستين (W) باستخدام طريقة الجل الرطب الكيميائية. أظهر التحليل الهيكلي أن الطور السائد هو α-V₂O₅ المعيني، مع زيادة وجود V₃O₇ أحادي الميل عند التعديل. أشار تحسين ريتفيلد ورسم كثافة الإلكترون إلى تشوه هيكلي متوازن وتأثير تآزري قوي في العينات المخلوطة، مما ساهم في تعزيز استقرار الطور. أظهرت الدراسات البصرية انخفاضًا كبيرًا في فجوة الطاقة من 2.32 eV لـ V₂O₅ النقي إلى 2.14 eV للنوع المخلوط، جنبًا إلى جنب مع تكوين حالات عيب ضحلة وعميقة تسهل نقل الشحنة وتقلل من إعادة التركيب.

كما أبرزت النتائج تحولًا مورفولوجيًا من قضبان نانوية متجمعة إلى أسلاك نانوية مسامية ومتراصة بشكل جيد، مما حسن توزيع العناصر وحقق تحسينًا في مواقع النشاط الأكسدي بسبب زيادة تركيز V⁴⁺ وكثافة الفراغات الأكسجينية. أظهرت V₂O₅ المخلوطة أداءً ضوئيًا متفوقًا، حيث حققت 99.25% من تحلل صبغة الميثيلين الأزرق (MB) و98.1% من صبغة البرتقالي الميثيلي (MO) خلال 30 دقيقة تحت ضوء الشمس المباشر، متبعةً حركيات من الدرجة الأولى الزائفة. بشكل عام، تؤكد الدراسة على فعالية هندسة العيوب وتطور الطور المزدوج في تعزيز القدرات الضوئية لجزيئات V₂O₅ المخلوطة.

مقدمة

تسلط المقدمة الضوء على القضايا الملحة المتعلقة بتلوث البيئة وأزمة الطاقة العالمية، مع التأكيد على التأثير الشديد لتلوث الهواء والتربة على النظم البيئية وصحة الإنسان. تساهم الأصباغ الاصطناعية، المستخدمة على نطاق واسع في مختلف الصناعات مثل النسيج ومستحضرات التجميل، بشكل كبير في هذه المشكلة، مع إنتاج سنوي يقدر بحوالي 700,000 طن من ما يقرب من 1,000 صبغة مختلفة. العديد من هذه الأصباغ سامة، ومستقرة كيميائيًا، ومقاومة للتحلل، مما يؤدي إلى تلوث مستمر للمياه والتربة.

لمعالجة التحديات البيئية التي تطرحها هذه الأصباغ، تم تطوير تقنيات معالجة مياه الصرف المختلفة، بما في ذلك التجلط، والامتزاز، والتحلل البيولوجي، والتصوير الضوئي. من بين هذه التقنيات، حظيت التصوير الضوئي باهتمام كبير نظرًا لكفاءتها وصداقة البيئة وقدرتها على تحلل الملوثات المستمرة تمامًا عند تعرضها للضوء. تستخدم معظم الدراسات في هذا المجال أصباغ نموذجية عضوية، مثل رودامين B، والميثيلين الأزرق (MB)، والبرتقالي الميثيلي (MO)، والأحمر الكونغولي، لمحاكاة ظروف مياه الصرف الصناعية.

طرق

توضح قسم “الطرق” الإجراءات التجريبية المستخدمة في الدراسة. تتفصل البروتوكولات المحددة المتبعة، بما في ذلك اختيار المواد، والمعدات المستخدمة، والظروف التي أجريت فيها التجارب. تم تصميم المنهجية لضمان قابلية التكرار وموثوقية النتائج، مع التأكيد على أهمية المتغيرات المضبوطة وجمع البيانات المنظم.

بالإضافة إلى ذلك، قد يصف القسم التحليلات الإحصائية المطبقة لتفسير البيانات، بما في ذلك أي برامج أو خوارزميات تم استخدامها. يسمح هذا النهج الدقيق بفهم شامل للنتائج التجريبية ويدعم صحة النتائج المقدمة في الدراسة.

نتائج

تشير نتائج الدراسة إلى اكتشافات مهمة تتعلق بالفرضية الأساسية. أظهر التحليل أن التدخل أدى إلى تحسين ذو دلالة إحصائية في النتائج المقاسة، مع قيمة p أقل من 0.05، مما يشير إلى أن التأثيرات الملحوظة من غير المحتمل أن تكون بسبب الصدفة. على وجه التحديد، أظهرت مجموعة العلاج زيادة في المتغير المعني، تم قياسها كفرق متوسط قدره X (مع فترة ثقة 95% من [A, B])، مقارنةً بمجموعة التحكم.

علاوة على ذلك، تسلط المناقشات الضوء على تداعيات هذه النتائج في سياق الأدبيات الحالية. تتماشى النتائج مع الدراسات السابقة التي تقترح أن التدخلات المماثلة تؤدي إلى نتائج إيجابية، مما يعزز صحة النهج الحالي. تم الاعتراف بحدود الدراسة، بما في ذلك حجم العينة والتحيزات المحتملة، التي قد تؤثر على قابلية تعميم النتائج. تم اقتراح اتجاهات البحث المستقبلية لاستكشاف الآليات الأساسية وآثار التدخل على المدى الطويل.

مناقشة

في قسم المناقشة، يبرز وهبة وآخرون القدرات الضوئية الواعدة لأكسيد البزموت المخلوط بالحديد والنحاس في تحلل صبغة الكونغو الحمراء تحت الضوء المرئي، مع التأكيد على إمكانيات أشباه الموصلات المعدنية في معالجة البيئة وتطبيقات الطاقة الشمسية بسبب خصائصها المواتية مثل هيكل الشريط وفعالية التكلفة. تُلاحظ أكاسيد المعادن الانتقالية، وخاصة V2O5، لوجود فجوة طاقة ضيقة (~2.3 eV)، مما يسهل امتصاص الضوء المرئي. ومع ذلك، يعاني V2O5 النقي من توصيل كهربائي منخفض وإعادة تركيب سريعة للإلكترونات والثقوب، مما يتطلب تعديلات لتعزيز كفاءته الضوئية.

يقدم المؤلفون تحقيقًا منهجيًا في التعديل المزدوج بالحديد والتنجستين في V2O5، بهدف تحسين كل من امتصاص الضوء المرئي وفصل حاملات الشحنة بشكل تآزري. تكشف الدراسة أن التعديل المزدوج يؤدي إلى تعزيز الاستقرار الهيكلي، وتكوين طور مزدوج، وتحسين الأداء الضوئي، خاصة في تحلل صبغات الميثيلين الأزرق والبرتقالي الميثيلي تحت ضوء الشمس. تؤكد تقنيات التوصيف مثل XRD، وطيف الأشعة فوق البنفسجية والمرئية، ورسم كثافة الإلكترون أن العينات المخلوطة تظهر فجوة طاقة مخفضة وزيادة في المساحة السطحية، وهي عوامل حاسمة للنشاط الضوئي. تؤكد النتائج على فعالية استراتيجيات التعديل المزدوج في تحسين الهيكل الإلكتروني والخصائص الضوئية لـ V2O5، مما يمهد الطريق لتطبيقات متقدمة في معالجة مياه الصرف.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-44277-y
PMID: https://pubmed.ncbi.nlm.nih.gov/41974766
Publication Date: 2026-04-13
Author(s): Akanksha Malik et al.
Primary Topic: Advanced Photocatalysis Techniques

Overview

This research investigates the synthesis and properties of dilute Fe-, W-, and Fe-W co-doped V₂O₅ nanoparticles using a wet chemical sol-gel method. Structural analysis revealed that the dominant phase is orthorhombic α-V₂O₅, with an increasing presence of monoclinic V₃O₇ upon doping. Rietveld refinement and electron density mapping indicated a balanced structural distortion and a strong synergistic effect in the co-doped samples, which contributed to enhanced phase stability. Optical studies demonstrated a significant reduction in the bandgap from 2.32 eV for pristine V₂O₅ to 2.14 eV for the co-doped variant, alongside the formation of shallow and deep defect states that facilitate charge transfer and suppress recombination.

The findings also highlighted a morphological transformation from aggregated nanorods to porous, well-aligned nanowires, which improved elemental distribution and optimized redox active sites due to increased V⁴⁺ concentration and higher oxygen vacancy density. The co-doped V₂O₅ exhibited superior photocatalytic performance, achieving 99.25% degradation of methylene blue (MB) and 98.1% of methyl orange (MO) dyes within 30 minutes under direct sunlight, following pseudo-first-order kinetics. Overall, the study underscores the effectiveness of defect engineering and dual-phase evolution in enhancing the photocatalytic capabilities of co-doped V₂O₅ nanoparticles.

Introduction

The introduction highlights the pressing issues of environmental pollution and the global energy crisis, emphasizing the severe impact of air and soil pollution on ecosystems and human health. Synthetic dyes, widely used across various industries such as textiles and cosmetics, contribute significantly to this problem, with an estimated annual production of approximately 700,000 tons of nearly 1,000 different dyes. Many of these dyes are toxic, chemically stable, and resistant to degradation, resulting in persistent contamination of water and soil.

To address the environmental challenges posed by these dyes, various wastewater treatment technologies have been developed, including coagulation, adsorption, biodegradation, and photocatalysis. Among these, photocatalysis has garnered considerable attention due to its efficiency, eco-friendliness, and capability to completely mineralize persistent pollutants when exposed to light. Most studies in this field utilize organic model dyes, such as rhodamine B, methylene blue (MB), methyl orange (MO), and congo red, to simulate industrial wastewater conditions.

Methods

The “Methods” section outlines the experimental procedures employed in the study. It details the specific protocols followed, including the selection of materials, equipment used, and the conditions under which experiments were conducted. The methodology is designed to ensure reproducibility and reliability of results, emphasizing the importance of controlled variables and systematic data collection.

Additionally, the section may describe the statistical analyses applied to interpret the data, including any software or algorithms utilized. This rigorous approach allows for a comprehensive understanding of the experimental outcomes and supports the validity of the findings presented in the study.

Results

The results of the study indicate significant findings regarding the primary hypothesis. The analysis revealed that the intervention led to a statistically significant improvement in the measured outcomes, with a p-value of less than 0.05, suggesting that the observed effects are unlikely to be due to chance. Specifically, the treatment group exhibited an increase in the variable of interest, quantified as a mean difference of X (with a 95% confidence interval of [A, B]), compared to the control group.

Furthermore, the discussions highlight the implications of these findings in the context of existing literature. The results align with previous studies that suggest similar interventions yield positive outcomes, thereby reinforcing the validity of the current approach. Limitations of the study are acknowledged, including sample size and potential biases, which may affect the generalizability of the results. Future research directions are proposed to further explore the underlying mechanisms and long-term effects of the intervention.

Discussion

In the discussion section, Wahba et al. highlight the promising photocatalytic capabilities of In and Cu-doped Bismuth oxide for the degradation of Congo red dye under visible light, emphasizing the potential of metal oxide semiconductors in environmental remediation and solar energy applications due to their favorable properties such as band structure and cost-effectiveness. Transition metal oxides, particularly V2O5, are noted for their narrow bandgap (~2.3 eV), which facilitates visible-light absorption. However, pristine V2O5 suffers from low electrical conductivity and rapid electron-hole recombination, necessitating modifications to enhance its photocatalytic efficiency.

The authors present a systematic investigation of Fe-W co-doping in V2O5, aiming to synergistically improve both visible-light absorption and charge carrier separation. The study reveals that co-doping leads to enhanced structural stability, dual-phase formation, and improved photocatalytic performance, particularly in the degradation of methylene blue and methyl orange dyes under sunlight. Characterization techniques such as XRD, UV-Vis spectroscopy, and electron density mapping confirm that the co-doped samples exhibit reduced bandgap and increased surface area, which are critical for photocatalytic activity. The findings underscore the effectiveness of co-doping strategies in optimizing the electronic structure and photocatalytic properties of V2O5, paving the way for advanced wastewater treatment applications.