DOI: https://doi.org/10.1063/5.0309415
PMID: https://pubmed.ncbi.nlm.nih.gov/41773799
تاريخ النشر: 2026-03-03
المؤلف: Ademola Soyemi وآخرون
الموضوع الرئيسي: التطبيقات الطيفية والدراسات الكيميائية الكمومية
نظرة عامة
تستكشف هذه الدراسة هيكل واجهة Na2SO4,aq-graphene، كاشفة عن رؤى مهمة حول توزيع الأيونات وتأثيراتها على تطبيقات الإلكتروليت. باستخدام محاكاة قائمة على إمكانيات التعلم الآلي بين الذرات (MLIP) وطيف توليد الترددات المجمعة (SFG) المحاكي، تتناول الدراسة التراكم التفضيلي غير المتوقع لأيونات الكبريتات ($\text{SO}_4^{2-}$) عند الواجهة، مما يتناقض مع السلوك النموذجي للأيونات الموجبة عند واجهات الجرافين-الإلكتروليت. تشير النتائج إلى أن أيونات الصوديوم ($\text{Na}^+$) تتجمع بين الطبقتين المائيتين الأولى والثانية عند الواجهة، بينما توجد أيونات الكبريتات بشكل أساسي داخل الطبقة الثانية، مما يؤدي إلى شحنة سالبة صافية في المنطقة الواجهة بسبب نسبة $\text{Na}^+/\text{SO}_4^{2-}$ دون الستويكيومترية.
تربط الدراسة أيضًا بين تعزيزات طيف SFG الملحوظة والانزياحات الحمراء في منطقة الروابط الهيدروجينية مع زيادة تركيز Na2SO4، منسوبة إلى ترتيب الاتجاه لجزيئات الماء المتأثرة بأيونات $\text{SO}_4^{2-}$. من خلال دمج المحاكاة الجزيئية مع بيانات SFG التجريبية، تؤكد الدراسة على أهمية MLIPs في تحقيق دقة على مستوى DFT على مدى فترات محاكاة طويلة، مما يسهل فهمًا أعمق للظواهر الواجهة. بشكل عام، لا توضح هذه العمل الديناميات الهيكلية عند واجهة الإلكتروليت-الجرافين فحسب، بل تقترح أيضًا طرقًا لتحسين الأنظمة الكهروكيميائية من خلال إدارة الأيونات المحسنة.
مقدمة
تسلط المقدمة الضوء على أهمية واجهة الإلكتروليت المائي-الجرافين في تطبيقات متنوعة، بما في ذلك الكيمياء الكهربائية، وتخزين الطاقة، ومعالجة المياه. يؤثر سلوك الواجهة على ظواهر رئيسية مثل تشكيل الطبقة الكهربائية المزدوجة (EDL) ونقل الشحنة، والتي تعتبر حاسمة لأداء واستقرار الأجهزة الكهروكيميائية. على الرغم من الدراسات السابقة التي استخدمت طيف توليد الترددات المجمعة (SFG) المحدد للسطح لوصف هذه الواجهات، فإن التحديات مثل نسب الإشارة إلى الضوضاء المنخفضة وتأثيرات الركيزة تعقد تفسير طيف SFG. تقدم التطورات الأخيرة في إمكانيات التعلم الآلي بين الذرات (MLIPs) المدربة على بيانات نظرية الكثافة الوظيفية (DFT) نهجًا واعدًا لمعالجة هذه التحديات.
تستكشف الدراسة بشكل خاص واجهة Na2SO4,aq -graphene، كاشفة أن أيونات Na⁺ و SO₄²⁻ تظهر تدرجًا مميزًا داخل الطبقات المائية عند الواجهة. تتجمع أيونات Na⁺ بين الطبقتين المائيتين الأولى والثانية، بينما توجد أيونات SO₄²⁻ داخل الطبقة الثانية. تشير النتائج إلى أن أيونات Na⁺ تهيمن على تركيز السطح، مما يؤدي إلى شحنة سالبة صافية عند الواجهة، متوافقة مع الملاحظات التجريبية. علاوة على ذلك، تظهر التحليلات أنه مع زيادة تركيز Na2SO4، يزداد ذروة SFG في منطقة الروابط الهيدروجينية ويتحول إلى الأحمر، مما يُنسب إلى تعزيز التفاعلات بين جزيئات الماء وأيونات SO₄²⁻. تؤكد هذه الدراسة على أهمية تدرج الأيونات وإعادة تنظيم الماء في فهم واجهة الإلكتروليت-الجرافين وتفسير طيف SFG.
طرق
في هذا القسم، يوضح المؤلفون منهجيتهم لتدريب إمكانيات التعلم الآلي بين الذرات (MLIPs) وحساب أطياف توليد الترددات المجمعة (SFG). لتدريب MLIP، تم إجراء حسابات نظرية الكثافة الوظيفية (DFT) المرجعية باستخدام حزمة المحاكاة فيينا Ab initio (VASP) مع الوظيفة RPBE وموجات معززة بالمشاريع (PAWs). قام المؤلفون بتنفيذ تصحيحات التشتت عبر طريقة Grimme’s D3، معدلين إياها لاستبعاد المساهمات من أيونات Na⁺. قاموا بتدريب MLIPs باستخدام حزمة NequIP، مما أدى إلى إنشاء مجموعة بيانات أولية من 2400 هيكل، تم تقسيمها إلى مجموعات تدريب (75%) والتحقق (25%). شمل التدريب مرحلتين، تركزت على تعلم القوى والضغوط بدقة، مما أسفر عن مجموعة بيانات نهائية من 4,047 هيكل للتدريب و 2,213 للتحقق. حقق MLIP النهائي أخطاء متوسطة مطلقة (MAE) تبلغ 0.53 meV/atom للطاقة، و29 meV/Å للقوة، و0.06 meV/Ų للضغط.
بالنسبة لحسابات SFG، استخدم المؤلفون الشكل الرياضي للت autocorrelation للسرعة-السرعة المحدد للسطح، مع التركيز على التقاط الاتجاهات العامة في أطياف SFG مع تجاهل مصطلحات الربط بين الجزيئات. قاموا بمتوسط أطياف SFG من خمس محاكاة NVT لمدة 500 ps، تم تهيئتها من مسارات الديناميكا الجزيئية المتقاربة. تم حساب الأطياف باستخدام أداة متخصصة، تضمين عوامل تصحيح الكم وتأثيرات غير كوندون. تم تعريف المنطقة الواجهة بحوالي 9 Å، وقام المؤلفون بتعديل الترددات المحسوبة بعامل 0.96 لأخذ تأثيرات الكم النووي في الاعتبار، مع الإشارة إلى أن مقارنة شاملة لطرق محاكاة SFG ستتم معالجتها في العمل المستقبلي.
نتائج
في هذا القسم، يقيم المؤلفون أداء إمكانيات التعلم الآلي بين الذرات (MLIP) في نمذجة واجهة الجرافين-الماء، خاصة في وجود كبريتات الصوديوم (Na2SO4). يظهرون أن MLIP يلتقط بدقة كل من الهياكل المائية عند الواجهة وفي الكتلة دون الحاجة إلى تفاعلات كولوم طويلة المدى صراحة، وهو أمر مهم نظرًا لوجهات النظر المتضاربة في الأدبيات بشأن ضرورة مثل هذه المعالجات. تكشف التحليلات أن MLIP يعيد إنتاج اتجاه جزيئات الماء بالقرب من سطح الجرافين، مع زيادة ملحوظة في متوسط اتجاه ثنائي القطب المائي مع زيادة المسافة عن السطح. بالإضافة إلى ذلك، يحافظ MLIP على توازن الشحنة في منطقة الكتلة، متماشيًا جيدًا مع توقعات نظرية الكثافة الوظيفية (DFT) لكثافة الماء ودوال التوزيع الشعاعي.
تستكشف الدراسة أيضًا توزيع أيونات Na⁺ و SO₄²⁻ عند الواجهة، حيث تجد أن أيونات Na⁺ تتجمع بالقرب من سطح الجرافين مقارنة بأيونات SO₄²⁻، التي تفضل بيئة أكثر شبيهة بالكتلة. يؤدي هذا التدرج إلى شحنة سالبة صافية عند الواجهة، والتي تزداد مع تركيز Na2SO4. كما يقوم المؤلفون بتحليل أطياف توليد الترددات المجمعة (SFG) المحددة للسطح، مشيرين إلى أن الذروة السلبية في منطقة الروابط الهيدروجينية تزداد مع زيادة تركيز Na2SO4، مما يشير إلى تعزيز النظام الاتجاهي بين جزيئات الماء. تشير النتائج إلى أن MLIP يلتقط بفعالية التفاعل المعقد بين الأيونات والماء عند الواجهة، مما يوفر رؤى حول الخصائص الهيكلية والديناميكية للنظام كما تتأثر بتغير تركيزات الأيونات.
مناقشة
في هذه الدراسة، استخدمنا محاكاة الديناميكا الجزيئية القائمة على MLIP للتحقيق في واجهة Na2SO4-graphene، مع التركيز على مجموعة من التركيزات من 0.1 إلى 2.0 M. سمحت لنا منهجيتنا، التي تستخدم نهج الجهد الكيميائي الثابت شبه المستمر (iqCμMD)، بالحفاظ على تركيز ثابت في منطقة الكتلة أثناء محاكاة الواجهة بنظام محدد جيدًا يتكون من صفائح جرافين ثابتة، وجزيئات ماء، وكميات متغيرة من Na2SO4. تم إجراء المحاكاة على مدى فترات زمنية ممتدة، مما يضمن أخذ عينات شاملة لكل من المناطق الكتلية والواجهة.
تكشف النتائج عن توزيع أيوني متدرج عند الواجهة، حيث تتجمع أيونات Na⁺ بالقرب من سطح الجرافين وتوجد أيونات SO₄²⁻ بعيدًا، مما يؤدي إلى شحنة سالبة صافية في المنطقة الواجهة. يتوافق هذا التدرج مع الملاحظات السابقة حول إثراء SO₄²⁻ عند الواجهة مع تراكم الأيونات الموجبة. بالإضافة إلى ذلك، تشير تحليلاتنا لبيانات طيف توليد الترددات المجمعة (SFG) إلى أن شدة ذروة SFG في منطقة الروابط الهيدروجينية ترتبط إيجابيًا بتركيز Na2SO4، مما يُنسب إلى اتجاه جزيئات الماء المتأثرة بأيونات SO₄²⁻. بشكل عام، تؤكد هذه العمل على أهمية دمج المحاكاة الجزيئية مع التقنيات التجريبية لتحقيق فهم شامل للهياكل والديناميات الواجهة، خاصة في سياق واجهات الإلكتروليت-الجرافين، التي تعتبر حاسمة لتقدم التطبيقات الكهروكيميائية.
DOI: https://doi.org/10.1063/5.0309415
PMID: https://pubmed.ncbi.nlm.nih.gov/41773799
Publication Date: 2026-03-03
Author(s): Ademola Soyemi et al.
Primary Topic: Spectroscopy and Quantum Chemical Studies
Overview
This research investigates the structure of the Na2SO4,aq-graphene interface, revealing significant insights into ion distribution and its implications for electrolyte applications. Utilizing machine learning interatomic potential (MLIP)-based simulations and simulated sum frequency generation (SFG) spectroscopy, the study addresses the unexpected preferential accumulation of sulfate ions ($\text{SO}_4^{2-}$) at the interface, which contrasts with the typical behavior of cations at graphene-electrolyte interfaces. The findings indicate that sodium ions ($\text{Na}^+$) accumulate between the first and second interfacial water layers, while sulfate ions are primarily found within the second layer, leading to a net negative charge in the interfacial region due to a sub-stoichiometric $\text{Na}^+/\text{SO}_4^{2-}$ ratio.
The study further correlates the observed SFG spectral enhancements and red-shifts in the hydrogen bonding region with increasing Na2SO4 concentration, attributing these changes to the orientational ordering of water molecules influenced by $\text{SO}_4^{2-}$ ions. By integrating molecular simulations with experimental SFG data, the research underscores the importance of MLIPs in achieving DFT-level accuracy over extended simulation times, thereby facilitating a deeper understanding of interfacial phenomena. Overall, this work not only clarifies the structural dynamics at the electrolyte-graphene interface but also suggests pathways for optimizing electrochemical systems through enhanced ion management.
Introduction
The introduction highlights the significance of the aqueous electrolyte-graphene interface in various applications, including electrochemistry, energy storage, and water treatment. The interface’s behavior influences key phenomena such as the formation of the electrical double layer (EDL) and charge transfer, which are crucial for the performance and stability of electrochemical devices. Despite previous studies utilizing surface-specific sum frequency generation (SFG) spectroscopy to characterize these interfaces, challenges such as low signal-to-noise ratios and substrate effects complicate the interpretation of SFG spectra. Recent advancements in machine learning interatomic potentials (MLIPs) trained on density functional theory (DFT) data offer a promising approach to address these challenges.
The study specifically investigates the Na2SO4,aq -graphene interface, revealing that Na⁺ and SO₄²⁻ ions exhibit distinct stratification within the interfacial water layers. Na⁺ ions accumulate between the first and second water layers, while SO₄²⁻ ions are found within the second layer. The results indicate that Na⁺ ions dominate the surface concentration, leading to a net negative charge at the interface, consistent with experimental observations. Furthermore, the analysis shows that as the concentration of Na2SO4 increases, the SFG peak in the hydrogen bonding region intensifies and shifts red, attributed to enhanced interactions between water molecules and SO₄²⁻ ions. This study underscores the importance of ion stratification and water reorganization in understanding the electrolyte-graphene interface and interpreting SFG spectra.
Methods
In this section, the authors detail their methodology for training machine learning interatomic potentials (MLIPs) and calculating sum-frequency generation (SFG) spectra. For MLIP training, reference density functional theory (DFT) calculations were conducted using the Vienna Ab initio Simulation Package (VASP) with the RPBE functional and projector augmented waves (PAWs). The authors implemented dispersion corrections via Grimme’s D3 method, modifying it to exclude contributions from Na⁺ ions. They trained MLIPs using the NequIP package, generating an initial dataset of 2400 structures, which was split into training (75%) and validation (25%) sets. The training involved two stages, focusing on accurately learning forces and stresses, resulting in a final dataset of 4,047 structures for training and 2,213 for validation. The final MLIP achieved mean absolute errors (MAE) of 0.53 meV/atom for energy, 29 meV/Å for force, and 0.06 meV/Ų for stress.
For the SFG calculations, the authors employed the surface-specific velocity-velocity autocorrelation formalism, focusing on capturing overall trends in the SFG spectra while neglecting intermolecular coupling terms. They averaged SFG spectra from five 500 ps NVT simulations, initialized from converged molecular dynamics trajectories. The spectra were computed using a specialized tool, incorporating quantum correction factors and non-Condon effects. The interfacial region was defined as approximately 9 Å, and the authors scaled calculated frequencies by a factor of 0.96 to account for nuclear quantum effects, noting that a comprehensive comparison of SFG simulation methods will be addressed in future work.
Results
In this section, the authors evaluate the performance of their machine learning interatomic potential (MLIP) in modeling the graphene-water interface, particularly in the presence of sodium sulfate (Na2SO4). They demonstrate that the MLIP accurately captures both interfacial and bulk water structures without the need for explicit long-range Coulomb interactions, which is significant given conflicting views in the literature regarding the necessity of such treatments. The analysis reveals that the MLIP successfully reproduces the orientation of water molecules near the graphene surface, with a notable increase in the average water dipole orientation as the distance from the surface increases. Additionally, the MLIP maintains charge balance in the bulk region, aligning well with density functional theory (DFT) predictions for water density and radial distribution functions.
The study further explores the distribution of Na⁺ and SO₄²⁻ ions at the interface, finding that Na⁺ ions accumulate closer to the graphene surface compared to SO₄²⁻ ions, which prefer a more bulk-like environment. This stratification leads to a net negative charge at the interface, which increases with Na2SO4 concentration. The authors also analyze the surface-specific sum-frequency generation (SFG) spectra, noting that the negative peak in the hydrogen-bonded region intensifies with increasing Na2SO4 concentration, indicating enhanced orientational order among water molecules. The findings suggest that the MLIP effectively captures the complex interplay between ions and water at the interface, providing insights into the structural and dynamical properties of the system as influenced by varying ion concentrations.
Discussion
In this study, we employed MLIP-based molecular dynamics simulations to investigate the Na2SO4-graphene interface, focusing on a range of concentrations from 0.1 to 2.0 M. Our methodology, utilizing an iterative quasi-constant chemical potential (iqCμMD) approach, allowed us to maintain a constant concentration in the bulk region while simulating the interface with a well-defined system comprising fixed graphene sheets, water molecules, and varying amounts of Na2SO4. The simulations were conducted over extended timescales, ensuring thorough sampling of both bulk and interfacial regions.
The findings reveal a stratified ion distribution at the interface, with Na⁺ ions accumulating closer to the graphene surface and SO₄²⁻ ions residing further away, leading to a net negative charge in the interfacial region. This stratification reconciles previous observations of SO₄²⁻ enrichment at the interface with the accumulation of cations. Additionally, our analysis of sum frequency generation (SFG) spectroscopy data indicates that the intensity of the SFG peak in the hydrogen bonding region correlates positively with Na2SO4 concentration, attributed to the orientation of water molecules influenced by SO₄²⁻ ions. Overall, this work underscores the importance of integrating molecular simulations with experimental techniques to achieve a comprehensive understanding of interfacial structures and dynamics, particularly in the context of electrolyte-graphene interfaces, which are crucial for advancing electrochemical applications.
