أداء الانبعاث وخصائص الاحتراق لخلائط الديزل المعززة بجزيئات TIO₂ وCEO₂ باستخدام الأساليب التجريبية وتعلم الآلة Performance emission and combustion characteristics of TIO₂ and CEO₂ nanoparticle enhanced Mahua biodiesel diesel blends using experimental and machine learning approaches

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-38657-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41680251
تاريخ النشر: 2026-02-12
المؤلف: Venkatesh Janaki وآخرون
الموضوع الرئيسي: إنتاج واستخدامات الوقود الحيوي

نظرة عامة

تدرس الدراسة تأثيرات جزيئات TiO₂ و CeO₂ النانوية على الأداء والانبعاثات وخصائص الاحتراق لخلائط الديزل الحيوي-الديزل من نوع Mahua (B20). أدت إضافة الجزيئات النانوية بتركيزات تتراوح من 25 إلى 75 جزء في المليون إلى تحسين كبير في كفاءة الحرارة الكبحية (BTE) وتقليل استهلاك الوقود، مع ملاحظة الأداء الأمثل عند جرعة 50 جزء في المليون. على وجه التحديد، حقق خليط B20T50 أقصى BTE يبلغ حوالي 30.5% عند الحمل الكامل، مما يمثل تحسينًا بنسبة 6-8% مقارنة بالديزل النقي. علاوة على ذلك، أدى وجود الجزيئات النانوية إلى تقليل استهلاك الوقود المحدد بالكبح (BSFC) بنسبة 6-7% مقارنة بخليط B20، والذي يُعزى إلى تحسين الاحتراق وديناميات الأكسدة.

أشارت تحليلات الانبعاثات إلى أن الخلائط المعززة بالجزيئات النانوية أدت إلى تقليل كبير في انبعاثات أول أكسيد الكربون (CO) والهيدروكربونات (HC) – حوالي 25-30% و20-25% أقل، على التوالي – بالإضافة إلى انخفاض بنسبة 35-40% في عتمة الدخان، مما يشير إلى تحسين أكسدة السخام. ومع ذلك، لوحظ زيادة في انبعاثات أكاسيد النيتروجين (NOₓ) بنسبة 8-12% عند الأحمال الأعلى، على الأرجح بسبب ارتفاع درجات الحرارة داخل الأسطوانة. كشفت تحليلات الاحتراق عن ضغوط ذروة أعلى في الأسطوانة ومعدلات تحرير حرارة محسنة للخليط المدعوم بالجزيئات النانوية، مما ساهم في تحسين الأداء العام. استخدمت الدراسة أيضًا نموذج تعلم آلي من نوع XGBoost، والذي أظهر دقة تنبؤية عالية لأداء المحرك والانبعاثات، مما يشير إلى أن تركيز 50 جزء في المليون من الجزيئات النانوية يوفر توازنًا مثاليًا من حيث الكفاءة والتحكم في الانبعاثات. وبالتالي، يظهر الديزل الحيوي المدعوم بالجزيئات النانوية من نوع Mahua كوقود بديل واعد لمحركات الاحتراق الداخلي.

مقدمة

تناقش مقدمة ورقة البحث الاهتمام المتزايد بمصادر الطاقة المتجددة، وخاصة الديزل الحيوي، استجابةً للتحديات البيئية الناتجة عن استهلاك الوقود الأحفوري. يتميز الديزل الحيوي القابل للتحلل وغير السام بوجود قيود في تطبيقاته في محركات الديزل بسبب لزوجته العالية، وقيمته الحرارية المنخفضة، وتقلبه الأقل مقارنة بالديزل التقليدي، مما يؤدي إلى احتراق غير كامل وتقليل الكفاءة الحرارية. تركز الورقة على شجرة Mahua (Madhuca indica)، وهي شجرة زيتية غير صالحة للأكل وفيرة في الهند، كمصدر واعد لإنتاج الديزل الحيوي الذي لا ينافس مصادر الغذاء.

تدرس الدراسة تأثيرات خلط الديزل الحيوي من Mahua مع الديزل المعدني وإدخال جزيئات أكسيد المعادن، وتحديدًا أكسيد التيتانيوم (TiO₂) وأكسيد السيريوم (CeO₂)، لتحسين خصائص الاحتراق دون الحاجة إلى تعديلات على المحرك. تعمل هذه الجزيئات النانوية كعوامل تحفيز للأكسدة، مما يحسن من خلط الوقود والهواء ويعزز الاحتراق الكامل، مما يؤدي إلى زيادة الكفاءة الحرارية وتقليل انبعاثات أول أكسيد الكربون (CO) والهيدروكربونات (HC) والدخان. تم إجراء تحليلات تجريبية بتركيزات مختلفة من الجزيئات النانوية (25، 50، 75 جزء في المليون) لتقييم تأثيرها على أداء المحرك والانبعاثات. تشير النتائج إلى أن إضافة جزيئات TiO₂ النانوية يمكن أن تحسن بشكل كبير من كفاءة الحرارة الكبحية وتقلل من استهلاك الوقود المحدد، بينما تعزز أيضًا ديناميات الاحتراق من خلال تحسين الرش والتفاعل السطحي، مما يعالج بعض التحديات الكامنة في استخدام الديزل الحيوي في محركات الديزل.

الطرق

في هذه الدراسة، تم تحويل زيت Mahua (Madhuca indica) إلى الديزل الحيوي باستخدام الميثانول مع هيدروكسيد البوتاسيوم (KOH) كعامل تحفيز. تم إجراء تفاعل التحويل عند درجة حرارة 60 درجة مئوية. بعد إعداد الوقود، تم تشغيل المحرك في البداية على الديزل النقي لتحديد مقاييس الأداء الأساسية.

تضمنت التجارب اللاحقة اختبار خليط وقود مختلف، وتحديدًا B20، وB20 المدمج مع أكسيد التيتانيوم (TiO₂)، وB20 المدمج مع أكسيد السيريوم (CeO₂) بتركيزات 25، 50، و75 جزء في المليون. تم تعريض المحرك لخمس حالات تحميل مختلفة: 0%، 25%، 50%، 75%، و100%. تم تشغيل كل نقطة اختبار لمدة 10 دقائق، وتم حساب متوسط القراءات الثلاثية لتقليل الأخطاء العشوائية، مما يضمن موثوقية البيانات التي تم جمعها.

المناقشة

في هذا القسم، تناقش الدراسة تأثيرات جزيئات أكسيد التيتانيوم (TiO₂) وأكسيد السيريوم (CeO₂) النانوية على أداء الاحتراق والانبعاثات لخلائط الديزل الحيوي-الديزل من نوع Mahua. أدت إضافة TiO₂ بتركيزات تتراوح من 25-75 جزء في المليون إلى تقليل كبير في انبعاثات الهيدروكربونات (HC) وأول أكسيد الكربون (CO)، مع تقليل يصل إلى 6.62% و49%، على التوالي، عند ضغوط حقن الوقود المرتفعة. ومع ذلك، زادت انبعاثات NOx قليلاً (حتى 8%) بسبب ارتفاع درجات الحرارة داخل الأسطوانة. على العكس، أظهر CeO₂ قدرات تحكم في الانبعاثات متفوقة، حيث قلل انبعاثات CO وHC بنسبة 32% و45%، على التوالي، بينما زاد انبعاثات NOx قليلاً بنسبة 6%. ساعدت التفاعل التحفيزي الذي يسهل CeO₂ في تعزيز أكسدة السخام الكربوني غير المحترق، مما أدى إلى تقليل تكوين الجسيمات.

تسلط الدراسة أيضًا الضوء على التأثيرات التآزرية لدمج TiO₂ وCeO₂، حيث يحسن TiO₂ من الاشتعال والأكسدة، مما يؤدي إلى تقليل انبعاثات CO وHC، بينما يعمل CeO₂ على استقرار الاحتراق ويمكن أن يخفف من انبعاثات NOx من خلال ضبط التوقيت. تم تحديد التركيزات المثلى لكل من الجزيئات النانوية على أنها 50 جزء في المليون لـ TiO₂ و50-80 جزء في المليون لـ CeO₂، مما يشير إلى أن استخدامهما معًا يمكن أن يعزز كفاءة واستدامة محركات الديزل المدعومة بالديزل الحيوي. بالإضافة إلى ذلك، تم استخدام خوارزميات التعلم الآلي (ML)، وخاصة الانحدار باستخدام دعم المتجهات (SVR) وتعزيز التدرج المتطرف (XGBoost)، للتنبؤ بأداء المحرك والانبعاثات، مما يظهر دقة عالية وقوة في نمذجة ديناميات الاحتراق المعقدة. تؤكد الدراسة على الحاجة إلى مزيد من البحث في أنظمة الجزيئات النانوية المزدوجة وتقنيات النمذجة التنبؤية المتقدمة لسد الفجوات المعرفية الحالية في سلوك احتراق الديزل الحيوي.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-38657-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41680251
Publication Date: 2026-02-12
Author(s): Venkatesh Janaki et al.
Primary Topic: Biodiesel Production and Applications

Overview

The study investigates the effects of TiO₂ and CeO₂ nanoparticles on the performance, emissions, and combustion characteristics of Mahua biodiesel-diesel blends (B20). The addition of nanoparticles at concentrations ranging from 25 to 75 ppm significantly enhanced brake thermal efficiency (BTE) and reduced fuel consumption, with the optimal performance observed at a 50 ppm dosage. Specifically, the B20T50 blend achieved a maximum BTE of approximately 30.5% at full load, representing a 6-8% improvement over neat diesel. Furthermore, the presence of nanoparticles led to a reduction in brake-specific fuel consumption (BSFC) by 6-7% compared to the B20 blend, attributed to improved combustion and oxidation kinetics.

Emission analyses indicated that nanoparticle-enhanced blends resulted in substantial reductions in carbon monoxide (CO) and hydrocarbon (HC) emissions—approximately 25-30% and 20-25% lower, respectively—along with a 35-40% decrease in smoke opacity, suggesting enhanced soot oxidation. However, an increase in nitrogen oxides (NOₓ) emissions by 8-12% was noted at higher loads, likely due to elevated in-cylinder temperatures. Combustion analysis revealed higher peak cylinder pressures and improved heat release rates for the nanoparticle-doped blends, contributing to overall performance enhancements. The study also employed an XGBoost machine learning model, which demonstrated high predictive accuracy for engine performance and emissions, indicating that a 50 ppm concentration of nanoparticles offers an optimal balance for efficiency and emission control. Thus, nanoparticle-assisted Mahua biodiesel emerges as a promising alternative fuel for compression ignition engines.

Introduction

The introduction of the research paper discusses the growing interest in renewable energy sources, particularly biodiesel, as a response to the environmental challenges posed by fossil fuel consumption. Biodiesel, characterized by its biodegradability and non-toxicity, faces limitations in diesel engine applications due to its higher viscosity, lower calorific value, and poorer volatility compared to conventional diesel, leading to incomplete combustion and reduced thermal efficiency. The paper focuses on Mahua (Madhuca indica), a non-edible oilseed tree abundant in India, as a promising feedstock for biodiesel production that does not compete with food sources.

The study investigates the effects of blending Mahua biodiesel with mineral diesel and the incorporation of metal oxide nanoparticles, specifically titanium dioxide (TiO₂) and cerium oxide (CeO₂), to enhance combustion characteristics without requiring engine modifications. These nanoparticles serve as oxidation catalysts, improving fuel-air mixing and promoting complete combustion, which results in higher thermal efficiency and reduced emissions of carbon monoxide (CO), hydrocarbons (HC), and smoke. Experimental analyses are conducted at varying nanoparticle concentrations (25, 50, 75 ppm) to evaluate their impact on engine performance and emissions. The findings indicate that the addition of TiO₂ nanoparticles can significantly improve brake thermal efficiency and reduce specific fuel consumption, while also enhancing combustion kinetics through better atomization and surface interaction, thereby addressing some of the inherent challenges of biodiesel use in diesel engines.

Methods

In this study, Mahua oil (Madhuca indica) was transesterified with methanol using potassium hydroxide (KOH) as a catalyst to produce biodiesel. The transesterification reaction was conducted at a temperature of 60°C. Following fuel preparation, the engine was initially operated on neat diesel to establish baseline performance metrics.

Subsequent experiments involved testing various fuel mixtures, specifically B20, B20 combined with titanium dioxide (TiO₂), and B20 combined with cerium oxide (CeO₂) at concentrations of 25, 50, and 75 ppm. The engine was subjected to five different load conditions: 0%, 25%, 50%, 75%, and 100%. Each test point was run for 10 minutes, and the average of triplicate readings was calculated to minimize random errors, ensuring the reliability of the data collected.

Discussion

In this section, the study discusses the effects of titanium dioxide (TiO₂) and cerium oxide (CeO₂) nanoparticles on the combustion performance and emissions of Mahua biodiesel-diesel blends. The addition of TiO₂ at concentrations of 25-75 ppm resulted in a significant reduction in hydrocarbon (HC) and carbon monoxide (CO) emissions, with reductions of up to 6.62% and 49%, respectively, at elevated fuel injection pressures. However, NOx emissions increased slightly (up to 8%) due to higher in-cylinder temperatures. Conversely, CeO₂ demonstrated superior emission control capabilities, reducing CO and HC emissions by 32% and 45%, respectively, while only slightly increasing NOx emissions by 6%. The catalytic reaction facilitated by CeO₂ enhances the oxidation of unburned carbon soot, leading to lower particulate matter formation.

The study also highlights the synergistic effects of combining TiO₂ and CeO₂, where TiO₂ improves ignition and oxidation, resulting in lower CO and HC emissions, while CeO₂ stabilizes combustion and can mitigate NOx emissions through timing adjustments. The optimal concentrations for both nanoparticles were identified as 50 ppm for TiO₂ and 50-80 ppm for CeO₂, suggesting that their combined use could enhance the efficiency and sustainability of biodiesel-fueled engines. Additionally, machine learning (ML) algorithms, particularly Support Vector Regression (SVR) and Extreme Gradient Boosting (XGBoost), were employed to predict engine performance and emissions, demonstrating high accuracy and robustness in modeling complex combustion dynamics. The study underscores the need for further research into dual nanoparticle systems and advanced predictive modeling techniques to bridge existing knowledge gaps in biodiesel combustion behavior.