DOI: https://doi.org/10.1007/s13762-026-07117-0
تاريخ النشر: 2026-02-27
المؤلف: Afsana Jerin وآخرون
الموضوع الرئيسي: اختيار المواد وخصائصها
نظرة عامة
تستكشف هذه الدراسة عملية اختيار المواد للمعدات الطبية، مع التأكيد على الحاجة إلى تحقيق توازن بين الاستدامة البيئية، والجدوى الاقتصادية، واستهلاك الطاقة. باستخدام تقييم دورة الحياة (LCA) مع طريقة ReCiPe، تستخدم البحث خوارزمية جينية متعددة الأهداف (MOGA) وتحسين سرب الجسيمات متعدد الأهداف (MOPSO) لتحسين خيارات المواد عبر ثماني فئات من المعدات الطبية. تكشف النتائج أن العناصر القابلة لإعادة الاستخدام، على الرغم من فوائدها في تقليل النفايات، غالبًا ما تتسبب في تأثيرات بيئية أعلى بسبب عمليات التعقيم التي تتطلب طاقة كبيرة. بالمقابل، تظهر البدائل ذات الاستخدام الواحد تأثيرات أقل لكل استخدام ولكنها تساهم في أعباء تراكمية أكبر مع مرور الوقت. ومن الجدير بالذكر أن كلوريد البوليفينيل (PVC) تم تحديده كمواد فعالة من حيث التكلفة، حيث أظهرت MOPSO أداءً متفوقًا في كفاءة الطاقة والتأثير البيئي مقارنةً بـ MOGA.
تؤكد النتائج على أهمية نهج متوازن في اختيار المواد، مشددة على أنه بينما يمكن أن تعزز المكونات القابلة لإعادة الاستخدام الاستدامة، إلا أنها قد تؤدي أيضًا إلى زيادة التكاليف أو تقليل نسب الفائدة إلى التكلفة (BCR). توضح الدراسة التبادلات المعقدة في اتخاذ القرارات المستدامة، حيث قد compromise الحلول الموفرة للطاقة الأداء الاقتصادي. بالإضافة إلى ذلك، يتم وضع النتائج في سياق البنية التحتية للرعاية الصحية في بنغلاديش، مما يشير إلى أن العوامل المحلية يمكن أن تؤثر بشكل كبير على النتائج البيئية. يُعتبر إطار تحسين LCA المقترح قابلاً للنقل إلى إعدادات الرعاية الصحية الأخرى، بشرط دمج البيانات والمعلمات المحلية. في النهاية، تدعو الأبحاث مؤسسات الرعاية الصحية إلى تقييم أهداف الاستدامة الخاصة بها بعناية جنبًا إلى جنب مع التكاليف والاحتياجات التشغيلية لتحقيق توازن مثالي في اختيار المواد.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على القضية الملحة للاستدامة البيئية داخل أنظمة الرعاية الصحية، لا سيما بسبب الانبعاثات الكبيرة من غازات الدفيئة (GHG) المنسوبة إلى المعدات الطبية، والتي تمثل 4.4% من الانبعاثات العالمية. تؤكد الدراسة على الحاجة إلى استراتيجيات تقلل من البصمة البيئية للأجهزة الطبية مع تحقيق توازن بين الاعتبارات البيئية والاقتصادية والوظيفية. يُعتبر تقييم دورة الحياة (LCA) منهجية حاسمة لتقييم التأثيرات البيئية للمنتجات الطبية، ومع ذلك، غالبًا ما تتجاهل الأساليب الحالية دمج الجدوى الاقتصادية واستهلاك الطاقة في إطار تحسين موحد.
لمعالجة هذه الفجوة، تقترح الأبحاث إطارًا جديدًا يجمع بين LCA وتقنيات التحسين متعددة الأهداف، باستخدام طريقة ReCiPe جنبًا إلى جنب مع خوارزمية جينية متعددة الأهداف (MOGA) وتحسين سرب الجسيمات متعدد الأهداف (MOPSO). يهدف هذا النهج المتكامل إلى تحديد الحلول المثلى من حيث Pareto التي توازن بين التأثير البيئي، ونسبة الفائدة إلى التكلفة (BCR)، واستهلاك الطاقة في اختيار المواد للمعدات الطبية. تشير النتائج إلى أنه بينما يمكن أن تقلل العناصر الطبية القابلة لإعادة الاستخدام من النفايات، إلا أنها قد تتطلب مدخلات طاقة أعلى للصيانة، مما يبرز الحاجة إلى توازن دقيق بين الاستدامة والجدوى الاقتصادية. في النهاية، توفر هذه الدراسة أداة دعم القرار لفرق الشراء في الرعاية الصحية، مما يمكّنهم من تقييم الآثار البيئية والاقتصادية والطاقة في وقت واحد، وبالتالي المساهمة في الاستدامة على المدى الطويل في الرعاية الصحية.
الطرق
في هذه الدراسة، تم تطوير نموذج تحسين متعدد الأهداف لتحسين استدامة اختيار المعدات الطبية. يهدف النموذج إلى تقليل التأثير البيئي واستهلاك الطاقة مع زيادة نسبة الفائدة إلى التكلفة (BCR). يتم تقييم التأثيرات البيئية باستخدام بيانات تقييم دورة الحياة (LCA)، والتي توفر رؤى حول البصمة البيئية للمواد طوال دوراتها الحياتية. يتم تعريف BCR كنسبة التأثير البيئي إلى التكلفة، مما يسهل اختيار المواد التي توازن بين الكفاءة الاقتصادية والاستدامة. بالإضافة إلى ذلك، يأخذ النموذج في الاعتبار متطلبات الطاقة لدورة حياة المواد، متماشيًا مع أهداف الرعاية الصحية لتقليل انبعاثات الكربون واستخدام الطاقة. بشكل جماعي، تدعم هذه الأهداف المستشفيات في اتخاذ قرارات الشراء التي تكون اقتصادية وقابلة للتحمل بيئيًا.
النتائج
تسلط نتائج تقييم دورة الحياة (LCA) باستخدام طريقة ReCiPe الضوء على التبادلات البيئية الكبيرة بين المعدات الطبية القابلة لإعادة الاستخدام وذات الاستخدام الواحد. تشير الدرجات المعيارية إلى أن العناصر القابلة لإعادة الاستخدام، مثل مجموعة القسطرة الوريدية المركزية ودائرة التنفس، لديها درجات تأثير إجمالية عالية، لا سيما في صحة الإنسان (على سبيل المثال، $2.12 \times 10^{-7}$ DALY لمجموعة القسطرة) واستنفاد الموارد (12,168.32 لدائرة التنفس). بالمقابل، تظهر العناصر ذات الاستخدام الواحد تأثيرات بيئية أقل لكل استخدام، ولكن تأثيراتها التراكمية تتصاعد مع مرور الوقت بسبب القابلية للتخلص (على سبيل المثال، $8.14 \times 10^{-8}$ DALY لمجموعة القسطرة ذات الاستخدام الواحد).
تكشف النتائج أنه بينما قد تقلل المعدات القابلة لإعادة الاستخدام من توليد النفايات، إلا أنها تتطلب مدخلات طاقة وموارد أعلى بسبب عمليات الإنتاج والتعقيم المكثفة. بالمقابل، تظهر العناصر ذات الاستخدام الواحد، مثل القسطرات البولية المحبة للماء المصنوعة من PVC وTPU، تأثيرات بيئية ضئيلة، كل منها تحت 20,000 نقطة موزونة. تحدد تحليل النقاط الساخنة التعقيم الذي يتطلب طاقة واستخراج المواد الخام كعوامل رئيسية تساهم في التأثيرات البيئية، مما يبرز الحاجة إلى نهج متوازن في اختيار المعدات الطبية بناءً على أهداف الاستدامة والمتطلبات التشغيلية. بشكل عام، تؤكد النتائج على تعقيد التأثيرات البيئية المرتبطة بالمعدات الطبية، مما يتطلب اعتبارًا دقيقًا لكل من الخيارات القابلة لإعادة الاستخدام وذات الاستخدام الواحد في إعدادات الرعاية الصحية.
المناقشة
تسلط قسم المناقشة في الورقة البحثية الضوء على التطبيق الواسع لتقييم دورة الحياة (LCA) في تقييم التأثيرات البيئية للإجراءات والمعدات الطبية، مع التركيز على انبعاثات الكربون، واستخدام الموارد، وتوليد النفايات. وثقت دراسات مختلفة بصمات الكربون للعلاجات المتعلقة بالصدمة الإنتانية، وأدوات التوليد، واختبارات علم الأمراض، والتهوية المساعدة في وحدات العناية المركزة، والمزيد. ومن الجدير بالذكر أن غرف العمليات تم تحديدها كعوامل رئيسية في استهلاك الموارد والنفايات، بينما قد تؤدي الأجهزة الطبية القابلة لإعادة الاستخدام إلى انبعاثات كربونية أعلى اعتمادًا على مصادر الطاقة. تشير المراجعة إلى أن طرق التصوير التشخيصي مثل التصوير المقطعي المحوسب (CT) والتصوير بالرنين المغناطيسي (MRI) لديها انبعاثات أكبر مقارنةً بالأشعة فوق الصوتية والأشعة السينية، وأن أجهزة الاستنشاق تعتبر مصادر كبيرة لانبعاثات غازات الدفيئة، مما يحفز المبادرات لتقليل انبعاثات الرعاية الصحية بنسبة 80% في المملكة المتحدة.
تؤكد الورقة على التباين في تقديرات بصمة الكربون بناءً على العوامل الإقليمية وأنماط الاستخدام، حيث يعتبر استهلاك الطاقة مساهمًا رئيسيًا في انبعاثات غازات الدفيئة. تشير الدراسات حول الأجهزة الطبية المعاد تصنيعها والمعاد معالجتها إلى أنه يمكن تحقيق تخفيضات كبيرة في الانبعاثات، حيث أفادت بعض الدراسات بتخفيضات تصل إلى 60%. يُقترح دمج نماذج الذكاء الاصطناعي، مثل الشبكات العصبية الاصطناعية (ANN) وأنظمة الاستدلال العصبي الضبابي التكيفية (ANFIS)، في منهجيات LCA كوسيلة لتعزيز تقييمات الاستدامة في أنظمة الرعاية الصحية. تختتم المناقشة بتحديد فجوة حاسمة في تطبيق تقنيات التحسين المتقدمة لاختيار المعدات الطبية بناءً على التأثير البيئي، والجدوى الاقتصادية، واستهلاك الطاقة، مما يبرز الحاجة إلى مزيد من البحث في تحسين المعدات الطبية المستدامة.
DOI: https://doi.org/10.1007/s13762-026-07117-0
Publication Date: 2026-02-27
Author(s): Afsana Jerin et al.
Primary Topic: Material Selection and Properties
Overview
This study investigates the material selection process for medical equipment, emphasizing the need to balance environmental sustainability, economic feasibility, and energy consumption. Utilizing Life Cycle Assessment (LCA) with the ReCiPe endpoint method, the research employs Multi-Objective Genetic Algorithm (MOGA) and Multi-Objective Particle Swarm Optimization (MOPSO) to optimize material choices across eight medical equipment categories. Findings reveal that reusable items, while beneficial in reducing waste, often incur higher environmental impacts due to energy-intensive sterilization processes. In contrast, single-use alternatives exhibit lower per-use impacts but contribute to greater cumulative burdens over time. Notably, Polyvinyl chloride (PVC) is identified as a cost-effective material, with MOPSO demonstrating superior performance in energy efficiency and environmental impact compared to MOGA.
The results underscore the importance of a balanced approach to material selection, highlighting that while reusable components can enhance sustainability, they may also lead to increased costs or reduced benefit-cost ratios (BCR). The study illustrates the complex trade-offs in sustainable decision-making, where energy-efficient solutions may compromise economic performance. Additionally, the findings are contextualized within Bangladesh’s healthcare infrastructure, suggesting that local factors can significantly influence environmental outcomes. The proposed LCA-optimization framework is deemed transferable to other healthcare settings, contingent on the incorporation of local data and parameters. Ultimately, the research advocates for healthcare institutions to carefully assess their sustainability objectives alongside cost and operational needs to achieve an optimal balance in material selection.
Introduction
The introduction of this research paper highlights the pressing issue of environmental sustainability within healthcare systems, particularly due to the significant greenhouse gas (GHG) emissions attributed to medical equipment, which accounts for 4.4% of global emissions. The study emphasizes the need for strategies that reduce the environmental footprint of medical devices while balancing ecological, economic, and functional considerations. Life Cycle Assessment (LCA) is identified as a critical methodology for evaluating the environmental impacts of medical products, yet existing approaches often overlook the integration of economic feasibility and energy consumption in a unified optimization framework.
To address this gap, the research proposes a novel framework that combines LCA with multi-objective optimization techniques, specifically using the endpoint ReCiPe method alongside Multi-Objective Genetic Algorithm (MOGA) and Multi-objective Particle Swarm Optimization (MOPSO). This integrated approach aims to identify Pareto-optimal solutions that balance environmental impact, benefit-cost ratio (BCR), and energy consumption in the material selection for medical equipment. The findings indicate that while reusable medical items can reduce waste, they may require higher energy inputs for maintenance, underscoring the need for a careful balance between sustainability and cost-effectiveness. Ultimately, this study provides a decision-support tool for healthcare procurement teams, enabling them to evaluate environmental, economic, and energy implications simultaneously, thus contributing to long-term sustainability in healthcare.
Methods
In this study, a multi-objective optimization model is developed to improve the sustainability of medical equipment selection. The model aims to minimize environmental impact and energy consumption while maximizing the Benefit-Cost Ratio (BCR). The environmental impacts are assessed using Life Cycle Assessment (LCA) data, which provides insights into the ecological footprint of materials throughout their life cycles. BCR is defined as the ratio of environmental impact to cost, facilitating material selection that balances economic efficiency with sustainability. Additionally, the model considers the life cycle energy requirements of materials, aligning with healthcare objectives to reduce carbon emissions and energy usage. Collectively, these objectives support hospitals in making procurement decisions that are both economically viable and environmentally responsible.
Results
The Life Cycle Assessment (LCA) results utilizing the ReCiPe endpoint method highlight significant environmental trade-offs between reusable and single-use medical equipment. Normalized scores indicate that reusable items, such as the central venous catheter kit and breathing circuit, have high total impact scores, particularly in human health (e.g., $2.12 \times 10^{-7}$ DALY for the catheter kit) and resource depletion (12,168.32 for the breathing circuit). Conversely, single-use items exhibit lower per-use environmental impacts, but their cumulative effects escalate over time due to disposability (e.g., $8.14 \times 10^{-8}$ DALY for the single-use catheter kit).
The findings reveal that while reusable equipment may mitigate waste generation, they incur higher energy and resource inputs due to intensive production and sterilization processes. In contrast, single-use items, such as hydrophilic urinary catheters made from PVC and TPU, demonstrate minimal environmental impacts, each under 20,000 weighted points. The hotspot analysis identifies energy-intensive sterilization and raw material extraction as primary contributors to environmental impacts, emphasizing the need for a balanced approach in selecting medical equipment based on sustainability goals and operational requirements. Overall, the results underscore the complexity of environmental impacts associated with medical equipment, necessitating careful consideration of both reusable and single-use options in healthcare settings.
Discussion
The discussion section of the research paper highlights the extensive application of Life Cycle Assessment (LCA) in evaluating the environmental impacts of medical procedures and equipment, with a focus on carbon emissions, resource utilization, and waste generation. Various studies have documented the carbon footprints of treatments for septic shock, delivery instruments, pathology testing, assisted ventilation in ICUs, and more. Notably, operating rooms are identified as significant contributors to resource consumption and waste, while reusable medical devices may lead to higher carbon emissions depending on energy sources. The review indicates that diagnostic imaging modalities such as CT and MRI have greater emissions compared to ultrasound and X-ray, and inhalers are substantial sources of greenhouse gas emissions, prompting initiatives to reduce healthcare emissions by 80% in the UK.
The paper emphasizes the variability in carbon footprint estimates based on regional factors and usage patterns, with energy consumption being a primary contributor to greenhouse gas emissions. Studies on remanufactured and reprocessed medical devices suggest that significant reductions in emissions can be achieved, with some studies reporting reductions of up to 60%. The integration of artificial intelligence models, such as Artificial Neural Networks (ANN) and Adaptive Neuro-Fuzzy Inference Systems (ANFIS), into LCA methodologies is proposed as a means to enhance sustainability assessments in healthcare systems. The discussion concludes by identifying a critical gap in the application of advanced optimization techniques for selecting medical equipment based on environmental impact, cost-effectiveness, and energy consumption, underscoring the need for further research in sustainable medical equipment optimization.
