DOI: https://doi.org/10.1038/s41598-026-56689-x
PMID: https://pubmed.ncbi.nlm.nih.gov/42270876
تاريخ النشر: 2026-06-10
المؤلف: Nagwa M. El-Bialy وآخرون
الموضوع الرئيسي: تطوير طرق الكيمياء التحليلية
نظرة عامة
تقدم هذه الدراسة تقنية جديدة لاستخراج نقطة السحاب المعززة بالسائل الأيوني (IL-CPE) لتكثيف وقياس كميات ضئيلة من أيونات النحاس (II) عند 436 نانومتر. تتضمن الطريقة تعقيد Cu(II) مع (Z)-4-bromo-2-(((2-hydroxyphenyl)imino)methyl)phenol عند pH 6.5، تليها عملية الاستخراج باستخدام 1-butyl-3-methylimidazolium hexafluorophosphate وTriton X-114. تحت الظروف المثلى، أظهرت طريقة IL-CPE خطية ممتازة (2.0-300 ميكروغرام لكل لتر، $R^2 = 0.9997$)، وحساسية عالية مع عوامل تركيز وتكثيف تبلغ 100 و12.5، على التوالي، وحد كشف يبلغ 0.6 ميكروغرام لكل لتر. تم التحقق من دقة الطريقة من خلال انحرافات معيارية نسبية منخفضة (1.6% و2.0% لـ 100 و200 ميكروغرام لكل لتر، على التوالي)، وتم تأكيد دقتها من خلال مواد مرجعية معتمدة وعينات بيئية حقيقية.
تم تقييم استدامة طريقة IL-CPE بدقة باستخدام مقاييس كيمياء التحليل الأخضر المختلفة، مما أسفر عن درجات إيجابية عبر مؤشرات متعددة، بما في ذلك درجة AGREE تبلغ 0.68 وترتيب مؤشر تقليل البصمة الكربونية (CaFRI) يبلغ 80. تجعل بساطة تشغيل الطريقة، واستهلاك المذيبات القليل، والتحمل العالي للأيونات المتزامنة منها مناسبة للتطبيقات التحليلية الروتينية. بالإضافة إلى ذلك، فإن إمكانياتها للتشغيل الآلي وقابلية التوسع تجعلها نهجًا موثوقًا وحساسًا وصديقًا للبيئة للكشف عن النحاس (II) الضئيل، مما يتماشى مع مبادئ كيمياء التحليل الأخضر المعاصرة. بشكل عام، تمثل طريقة IL-CPE تقدمًا كبيرًا في التقنيات التحليلية لمراقبة البيئة وسلامة الغذاء.
طرق
في هذا القسم، يوضح المؤلفون الأجهزة التجريبية والمواد المستخدمة في تحقيقهم. جميع الأجهزة مذكورة في المواد التكميلية، بينما تم استخدام كواشف عالية الجودة، بما في ذلك حمض النيتريك المركز (65%، v/v) وحمض الهيدروكلوريك (37%، v/v) من مصدر Merck. تم إعداد محلول مخزون من Cu(II) (1000 ميكروغرام لكل مل) عن طريق إذابة نترات النحاس في ماء مزدوج التقطير (DDW) مع إضافة حمض النيتريك. تم إنشاء حلول العمل القياسية اليومية من خلال التخفيف المتسلسل لهذا المحلول المخزون. تم الحصول على السائل الأيوني [C₄MIM][PF₆] من Acros Organics، وتم الحصول على Triton X-114، وهو عامل سطح غير أيوني، من Sigma-Aldrich لاستخدامه كمذيب للاستخراج.
بالإضافة إلى ذلك، تم إعداد محلول مائي 0.1 M من [C₄MIM][PF₆] ومحلول مائي 1.0% (v/v) من Triton X-114 مع التحريك المستمر في DDW. تم استخدام محلول عازل لضبط مستويات pH حسب الحاجة، ولدراسات التداخل، تم إعداد حلول تحتوي على أيونات مختلفة من أملاح عالية النقاء من خلال التخفيف المناسب مع DDW. يشير المؤلفون إلى أن هذه التحضيرات ضرورية لتحسين المتغيرات التجريبية وتقييم التداخلات المحتملة في طرقهم التحليلية.
نتائج
تكشف نتائج الدراسة عن اكتشافات هامة تتعلق بطيف الامتصاص والستيوكيومترية لمركب Cu(II)-BHPIMP. تم ملاحظة أقصى امتصاص ($\lambda_{max}$) عند 415 نانومتر للمركب الناتج بدون تكثيف مسبق، و432 نانومتر بعد استخدام طريقة استخراج نقطة السحاب التقليدية (CPE)، و436 نانومتر بعد استخدام طريقة CPE بالسائل الأيوني. يُعزى التحول الباثوكروما في $\lambda_{max}$ إلى التغيرات في الميكروبيئة للمركب أثناء الاستخراج، مما يعزز استقراره وخصائصه الكارهة للماء.
أشارت التحليلات الستيوكيومترية باستخدام كل من نسبة المولات والتغيرات المستمرة (طريقة جوب) إلى تكوين مركب 1:1 بين Cu(II) وBHPIMP، كما يتضح من أقصى امتصاص عند كسر المول 0.5 ونقطة انكسار عند نسبة ligand-to-metal تبلغ 1.0 في مخطط نسبة المولات. تؤكد هذه النتائج الدراسات السابقة التي استخدمت نفس العامل تحت ظروف طيفية مباشرة، مما يعزز الهيكل المقترح لمركب Cu(II)-BHPIMP.
مناقشة
تسلط قسم المناقشة في ورقة البحث الضوء على تطوير وفعالية طريقة جديدة لاستخراج نقطة السحاب المعززة بالسائل الأيوني (IL-CPE) لتكثيف وقياس كميات ضئيلة من النحاس (Cu(II)) في العينات البيئية والغذائية. تستخدم الطريقة العامل الأساسي شيف (Z)-4-bromo-2-(((2-hydroxyphenyl) imino)methyl)phenol (BHPIMP) بالتزامن مع السائل الأيوني [C₄MIM][PF₆] والعامل السطحي غير الأيوني Triton X-114. تعتبر هذه الطريقة مفيدة بشكل خاص لأنها تتماشى مع مبادئ كيمياء التحليل الأخضر من خلال تقليل استخدام المذيبات العضوية الخطرة وتقليل استهلاك الطاقة، مع تحقيق عوامل تركيز وحساسية عالية في القياسات الطيفية.
تؤكد الدراسة على قوة الطريقة، وانتقائيتها، واستدامتها، مما يظهر معدلات استرداد ممتازة لـ Cu(II) من مصفوفات متنوعة، بما في ذلك مياه الصنبور، والمياه المعبأة، ومياه الصرف الصحي، بالإضافة إلى عينات غذائية. تم تقييم الظروف المثلى للاستخراج، مثل pH، وحجم العامل، وتركيز العامل السطحي، بشكل منهجي لضمان أقصى كفاءة. تم التحقق من الأداء التحليلي من خلال تحليل المواد المرجعية المعتمدة، مما أسفر عن استردادات تتراوح بين 96.40% و97.54%، مما يؤكد موثوقية الطريقة. بشكل عام، تمثل تقنية IL-CPE المقترحة تقدمًا كبيرًا في التحديد التحليلي للنحاس (II) الضئيل، مما يوفر حلاً مستدامًا وفعالًا لمراقبة البيئة.
DOI: https://doi.org/10.1038/s41598-026-56689-x
PMID: https://pubmed.ncbi.nlm.nih.gov/42270876
Publication Date: 2026-06-10
Author(s): Nagwa M. El-Bialy et al.
Primary Topic: Analytical chemistry methods development
Overview
This research presents a novel ionic liquid-assisted cloud point extraction (IL-CPE) technique for the enrichment and spectrophotometric quantification of trace copper(II) ions at 436 nm. The method involves the complexation of Cu(II) with (Z)-4-bromo-2-(((2-hydroxyphenyl)imino)methyl)phenol at pH 6.5, followed by extraction using 1-butyl-3-methylimidazolium hexafluorophosphate and Triton X-114. Under optimal conditions, the IL-CPE method demonstrated excellent linearity (2.0-300 µg L⁻¹, $R^2 = 0.9997$), high sensitivity with preconcentration and enrichment factors of 100 and 12.5, respectively, and a detection limit of 0.6 µg L⁻¹. The method’s precision was validated with low relative standard deviations (1.6% and 2.0% for 100 and 200 µg L⁻¹, respectively), and its accuracy was confirmed through certified reference materials and real environmental samples.
The sustainability of the IL-CPE method was rigorously assessed using various Green Analytical Chemistry metrics, yielding favorable scores across multiple indices, including an AGREE score of 0.68 and a Carbon Footprint Reduction Index (CaFRI) ranking of 80. The method’s operational simplicity, minimal solvent consumption, and high tolerance to coexisting ions make it suitable for routine analytical applications. Additionally, its potential for automation and scalability positions it as a reliable, sensitive, and eco-friendly approach for trace Cu(II) detection, aligning with contemporary green analytical chemistry principles. Overall, the IL-CPE method represents a significant advancement in analytical techniques for environmental monitoring and food safety.
Methods
In this section, the authors detail the experimental apparatus and materials used in their investigation. All apparatus is referenced in the supplementary materials, while high-quality reagents were employed, including concentrated nitric acid (65%, v/v) and hydrochloric acid (37%, v/v) sourced from Merck. A Cu(II) stock solution (1000 µg mL⁻¹) was prepared by dissolving copper nitrate in double-distilled water (DDW) with the addition of nitric acid. Daily standard working solutions were created through sequential dilution of this stock solution. The ionic liquid [C₄MIM][PF₆] was obtained from Acros Organics, and Triton X-114, a non-ionic surfactant, was sourced from Sigma-Aldrich for use as an extraction solvent.
Additionally, a 0.1 M aqueous solution of [C₄MIM][PF₆] and a 1.0% (v/v) aqueous solution of Triton X-114 were prepared with continuous agitation in DDW. Buffer solutions were utilized to adjust pH levels as needed, and for interference studies, solutions containing various ions were prepared from high-purity salts through appropriate dilution with DDW. The authors indicate that these preparations are crucial for optimizing experimental variables and assessing potential interferences in their analytical methods.
Results
The results of the study reveal significant findings regarding the absorption spectra and stoichiometry of the Cu(II)-BHPIMP complex. The absorption maxima ($\lambda_{max}$) were observed at 415 nm for the complex produced without preconcentration, 432 nm following the conventional cloud point extraction (CPE) method, and 436 nm after the ionic liquid CPE method. The bathochromic shift in $\lambda_{max}$ is attributed to alterations in the microenvironment of the complex during extraction, which enhance its stability and hydrophobicity.
Stoichiometric analysis using both mole ratio and continuous variations (Job’s method) indicated the formation of a 1:1 complex between Cu(II) and BHPIMP, as evidenced by the maximum absorbance at a mole fraction of 0.5 and a breakpoint at a ligand-to-metal ratio of 1.0 in the mole ratio plot. These findings corroborate previous studies utilizing the same ligand under direct spectrophotometric conditions, thereby reinforcing the proposed structure of the Cu(II)-BHPIMP complex.
Discussion
The discussion section of the research paper highlights the development and efficacy of a novel ionic liquid-assisted cloud point extraction (IL-CPE) method for the preconcentration and quantification of trace copper (Cu(II)) in environmental and food samples. The method employs the Schiff base ligand (Z)-4-bromo-2-(((2-hydroxyphenyl) imino)methyl)phenol (BHPIMP) in conjunction with the ionic liquid [C₄MIM][PF₆] and the non-ionic surfactant Triton X-114. This approach is particularly advantageous as it aligns with the principles of Green Analytical Chemistry by minimizing the use of hazardous organic solvents and reducing energy consumption, while achieving high enrichment factors and sensitivity in spectrophotometric measurements.
The study emphasizes the method’s robustness, selectivity, and sustainability, demonstrating excellent recovery rates of Cu(II) from various matrices, including tap, bottled, and waste water, as well as food samples. The optimized conditions for extraction, such as pH, ligand volume, and surfactant concentration, were systematically evaluated to ensure maximum efficiency. The analytical performance was validated through the analysis of certified reference materials, yielding recoveries between 96.40% and 97.54%, confirming the method’s reliability. Overall, the proposed IL-CPE technique represents a significant advancement in the analytical determination of trace Cu(II), offering a sustainable and effective solution for environmental monitoring.
