DOI: https://doi.org/10.3389/fmech.2026.1802237
تاريخ النشر: 2026-04-21
المؤلف: Asad Ali Zaidi وآخرون
الموضوع الرئيسي: التصنيع الإضافي وتقنيات الطباعة ثلاثية الأبعاد
نظرة عامة
تقدم هذه المراجعة تحليلًا شاملاً لتصنيع البوليمرات المضافة متعددة المواد (AM)، مع تسليط الضوء على قدرتها على إنتاج مكونات بخصائص ميكانيكية وحرارية وكهربائية ووظيفية متنوعة ضمن بناء واحد. من خلال دمج مواد مختلفة مثل البلاستيك الحراري، والمطاط الصناعي، والبوليمرات الضوئية، تتجاوز هذه الطريقة قيود الطباعة ثلاثية الأبعاد ذات المادة الواحدة، مما يسمح بتصميم كل من الهندسة وتركيب المواد. تستعرض المراجعة بشكل منهجي التقدم المحرز عبر العمليات الرئيسية لتصنيع المواد المضافة، بما في ذلك بث المواد، وتشكيل البوليمر في الأحواض، ورش المواد، ودمج المساحيق، مع التركيز على عوامل حاسمة مثل الالتصاق بين السطحين، والتوافق الحراري الميكانيكي، وموثوقية العملية.
تشير النتائج الرئيسية إلى أن السلوك بين السطحين أمر حاسم لسلامة المكونات متعددة المواد وموثوقيتها الوظيفية، حيث أن عوامل مثل الانتشار بين الجزيئات وعدم تطابق الانكماش غالبًا ما تحد من الأداء. تؤكد المراجعة على ضرورة الهندسة المتعمدة للواجهات، داعية إلى استراتيجيات مثل انتقالات المواد المتدرجة والتحكم على مستوى الفوكسل لتعزيز الأداء بين السطحين. على الرغم من التقدم الكبير، لا تزال التحديات قائمة، بما في ذلك توافق المواد، وقيود الإنتاج، والحاجة إلى أطر اختبار موحدة. تسلط الرؤى المقدمة الضوء على أهمية التعامل مع تباين المواد والواجهات كمتغيرات تصميم أساسية، مما يضع تصنيع البوليمرات متعددة المواد كإحدى التقنيات المحورية لتطبيقات التصنيع المتكاملة المستقبلية عبر مجالات مثل الروبوتات اللينة، والأجهزة الطبية، وأدوات الطيران.
مقدمة
تسلط مقدمة ورقة البحث الضوء على التأثير التحويلي لتصنيع المواد المضافة (AM) على معالجة البوليمرات، لا سيما من خلال ظهور الطباعة ثلاثية الأبعاد للبوليمرات متعددة المواد. تتيح هذه التقنية دمج بوليمرات مختلفة ضمن بناء واحد، متجاوزة القيود المرتبطة بأساليب التصنيع التقليدية (Sahoo et al., 2025; Kohak et al., 2025; Wang et al., 2024; Jadhav et al., 2025). على الرغم من التقدم، فإن تعقيد الطباعة متعددة المواد يبرز من خلال التحديات المتعلقة بكيمياء البوليمرات، والسلوك الحراري، والالتصاق بين السطحين، والتي تعتبر حاسمة لضمان السلامة الميكانيكية والمتانة (Han and Lee, 2020; García-Collado et al., 2022; Dhinesh et al., 2021).
تؤكد الورقة على أن الانتشار غير الكافي بين السطحين ومشكلات التوافق الأخرى يمكن أن تؤدي إلى فشل كبير، حتى عندما تكون المواد الفردية موصوفة بشكل جيد (Alkunte et al., 2024; Khanna, 2011). علاوة على ذلك، فإن التنفيذ الفعال لتصنيع المواد المضافة متعددة المواد يعيقه الحاجة إلى أجهزة وبرامج متقدمة، بالإضافة إلى الأدبيات البحثية المجزأة. لمعالجة هذه التحديات، تهدف المراجعة إلى تقديم تحليل شامل لتصنيع البوليمرات متعددة المواد، تغطي العمليات الرئيسية، وتوافق المواد، والتحديات الرئيسية مثل الترابط بين السطحين وموثوقية العملية، بينما تستكشف أيضًا التطبيقات الناشئة التي تستفيد من هذه التقنيات.
الطرق
ت outlines قسم الطرق في ورقة البحث هذه نهج سردي منظم لمراجعة التقدم في تصنيع البوليمرات المضافة متعددة المواد. تم الحصول على الأدبيات من قواعد البيانات العلمية الرئيسية، مع التركيز على المقالات التي تمت مراجعتها من قبل الأقران من العقد الماضي، وخاصة السنوات الثلاث إلى الخمس الماضية، لضمان تضمين أحدث التطورات التكنولوجية. أكدت معايير الاختيار على الصلة باستراتيجيات معالجة المواد متعددة المواد، وتوافق المواد، وآليات الترابط بين السطحين، والتطبيقات الوظيفية، مع مراعاة الدراسات الأساسية للسياق التاريخي.
تناقش الورقة الأهمية الحاسمة لاختيار المواد في الطباعة ثلاثية الأبعاد للبوليمرات متعددة المواد، مع تسليط الضوء على الحاجة إلى التوافق بين البوليمرات المختلفة. تعتبر عوامل مثل الالتصاق بين السطحين، والتوافق الحراري، وسلوك المعالجة حاسمة لضمان السلامة الهيكلية والموثوقية الوظيفية. يتم التأكيد على دمج المطاط الصناعي، وخاصة البولي يوريثين الحراري (TPU)، مع البلاستيكات الحرارية الصلبة لقدرتها على إنشاء مكونات بخصائص ميكانيكية محسنة وامتثال. يتناول القسم أيضًا التحديات التي تطرحها البوليمرات عالية الأداء، التي، على الرغم من كونها قوية هيكليًا، تحد من تنوع المواد بسبب قيود المعالجة. علاوة على ذلك، تستكشف المراجعة المركبات الوظيفية والمواد الهجينة التي تدمج وظائف إضافية، مثل الخصائص الكهربائية والمغناطيسية، في المكونات المطبوعة، مما يبرز الحاجة إلى تقييمات المتانة واعتبارات دورة الحياة في تصميم هذه الأنظمة. بشكل عام، يؤسس قسم الطرق إطارًا شاملاً لفهم التعقيدات والتقدم في تصنيع البوليمرات المضافة متعددة المواد.
المناقشة
يوفر قسم المناقشة في ورقة البحث نظرة شاملة على تقنيات تصنيع البوليمرات المضافة متعددة المواد، مع تسليط الضوء على التعديلات التي تم إجراؤها عبر عمليات مختلفة مثل بث المواد، وتشكيل البوليمر في الأحواض، ورش المواد، ودمج المساحيق. كل طريقة تظهر مزايا وقيود فريدة من حيث استراتيجيات الإيداع، وآليات تبديل المواد، والدقة القابلة للتحقيق، والتحكم بين السطحين. على سبيل المثال، تُفضل تقنيات بث المواد مثل تصنيع الخيوط المنصهرة (FFF) وكتابة الحبر المباشر (DIW) بسبب بساطتها وفعاليتها من حيث التكلفة، ومع ذلك، تواجه تحديات تتعلق بالترابط بين السطحين والموثوقية الميكانيكية بسبب مشكلات الانتشار الحراري بين البوليمرات المختلفة. ظهرت أنظمة بث الخلط النشط كحل محتمل، مما يسمح بتدرجات مستمرة في خصائص المواد، على الرغم من أنها لا تزال تواجه قيودًا في الدقة المكانية مقارنة بالطرق الأخرى.
تُلاحظ عمليات تشكيل البوليمر في الأحواض، بما في ذلك الطباعة الحجرية (SLA) ومعالجة الضوء الرقمي (DLP)، لدقتها العالية ولكنها تكافح مع التلوث المتبادل وإزالة الراتنج غير المكتملة أثناء الطباعة متعددة المواد. تهدف التطورات الأخيرة في توصيل الراتنج المحلي إلى التخفيف من هذه المشكلات، ومع ذلك، تظل الحاجة إلى حركيات معالجة متوافقة عبر راتنجات مختلفة تحديًا حاسمًا. يسمح رش المواد، وخاصة من خلال أنظمة PolyJet، بالتحكم على مستوى الفوكسل في توزيع المواد، مما يمكّن من ترتيبات مواد معقدة. ومع ذلك، فإن الاعتماد على البوليمرات الضوئية الحرارية يحد من الأداء الميكانيكي ويثير مخاوف بشأن موثوقية الحدود بين السطحين. أخيرًا، تواجه عمليات دمج المساحيق مثل تشكيل الليزر الانتقائي (SLS) عقبات كبيرة في تحقيق قدرات متعددة المواد الحقيقية بسبب التلوث المتبادل للمساحيق وتعقيدات استرداد المواد. بشكل عام، بينما تظهر هذه الاستراتيجيات متعددة المواد إمكانات كبيرة، فإن تطبيقاتها العملية في إنتاج مكونات موثوقة هيكليًا مقيدة بواسطة قيود غير محلولة في التحكم بين السطحين وعملية التحكم.
DOI: https://doi.org/10.3389/fmech.2026.1802237
Publication Date: 2026-04-21
Author(s): Asad Ali Zaidi et al.
Primary Topic: Additive Manufacturing and 3D Printing Technologies
Overview
This review provides a comprehensive analysis of multi-material polymer additive manufacturing (AM), highlighting its ability to produce components with diverse mechanical, thermal, electrical, and functional properties within a single build. By integrating various materials such as thermoplastics, elastomers, and photopolymers, this approach transcends the limitations of single-material 3D printing, allowing for the design of both geometry and material composition. The review systematically examines advancements across major AM processes, including material extrusion, vat photopolymerization, material jetting, and powder bed fusion, with a focus on critical factors such as interfacial adhesion, thermal-mechanical compatibility, and process reliability.
Key findings indicate that interfacial behavior is crucial for the mechanical integrity and functional reliability of multi-material parts, with factors like inter-molecular diffusion and shrinkage mismatch often limiting performance. The review emphasizes the necessity of deliberate interface engineering, advocating for strategies such as graded material transitions and voxel-level control to enhance interfacial performance. Despite significant progress, challenges remain, including material compatibility, throughput limitations, and the need for standardized testing frameworks. The insights presented underscore the importance of treating material heterogeneity and interfaces as primary design variables, positioning multi-material polymer AM as a pivotal technology for future integrated manufacturing applications across fields such as soft robotics, biomedical devices, and aerospace tooling.
Introduction
The introduction of the research paper highlights the transformative impact of additive manufacturing (AM) on polymer processing, particularly through the advent of multimaterial polymer 3D printing. This technology allows for the integration of different polymers within a single build, overcoming limitations associated with traditional manufacturing methods (Sahoo et al., 2025; Kohak et al., 2025; Wang et al., 2024; Jadhav et al., 2025). Despite advancements, the complexity of multimaterial printing is underscored by challenges related to polymer chemistry, thermal behavior, and interfacial adhesion, which are critical for ensuring mechanical integrity and durability (Han and Lee, 2020; García-Collado et al., 2022; Dhinesh et al., 2021).
The paper emphasizes that inadequate interfacial diffusion and other compatibility issues can lead to significant failures, even when individual materials are well-characterized (Alkunte et al., 2024; Khanna, 2011). Furthermore, the effective implementation of multimaterial AM is hindered by the need for advanced hardware and software, as well as fragmented research literature. To address these challenges, the review aims to provide a thorough analysis of multimaterial polymer AM, covering major processes, material compatibility, and key challenges such as interfacial bonding and process reliability, while also exploring emerging applications that leverage these technologies.
Methods
The methods section of this research paper outlines a structured narrative approach to reviewing advancements in multi-material polymer additive manufacturing. The literature was sourced from major scientific databases, focusing on peer-reviewed articles from the last decade, particularly the last three to five years, to ensure the inclusion of the latest technological developments. The selection criteria emphasized relevance to multi-material processing strategies, material compatibility, interfacial bonding mechanisms, and functional applications, while also considering foundational studies for historical context.
The paper discusses the critical importance of material selection in multi-material polymer 3D printing, highlighting the need for compatibility among various polymers. Factors such as interfacial adhesion, thermal compatibility, and curing behavior are crucial for ensuring structural integrity and functional reliability. The integration of elastomers, particularly thermoplastic polyurethane (TPU), with rigid thermoplastics is emphasized for its ability to create components with enhanced mechanical properties and compliance. The section also addresses the challenges posed by high-performance polymers, which, while structurally robust, limit material diversity due to processing constraints. Furthermore, the review explores functional composites and hybrid materials that integrate additional functionalities, such as electrical and magnetic properties, into printed components, underscoring the need for durability assessments and lifecycle considerations in the design of these systems. Overall, the methods section establishes a comprehensive framework for understanding the complexities and advancements in multi-material polymer additive manufacturing.
Discussion
The discussion section of the research paper provides a comprehensive overview of multi-material polymer additive manufacturing techniques, highlighting the adaptations made across various processes such as material extrusion, vat photopolymerization, material jetting, and powder bed fusion. Each method exhibits unique advantages and limitations in terms of deposition strategies, material-switching mechanisms, achievable resolution, and interfacial control. For instance, material extrusion techniques like Fused Filament Fabrication (FFF) and Direct Ink Writing (DIW) are favored for their simplicity and cost-effectiveness, yet they face challenges related to interfacial bonding and mechanical reliability due to thermal diffusion issues between dissimilar polymers. Active-mixing extrusion systems have emerged as a potential solution, allowing for continuous gradients in material properties, although they still encounter limitations in spatial resolution compared to other methods.
Vat photopolymerization processes, including Stereolithography (SLA) and Digital Light Processing (DLP), are noted for their high resolution but struggle with cross-contamination and incomplete resin removal during multi-material printing. Recent advancements in localized resin delivery aim to mitigate these issues, yet the need for compatible curing kinetics across different resins remains a critical challenge. Material jetting, particularly through PolyJet systems, allows for voxel-level control of material distribution, enabling complex material arrangements. However, the reliance on thermoset photopolymers limits mechanical performance and raises concerns about the reliability of interfacial boundaries. Lastly, powder bed fusion processes like Selective Laser Sintering (SLS) face significant hurdles in achieving true multi-material capabilities due to powder cross-contamination and the complexities of material recovery. Overall, while these multi-material strategies demonstrate significant potential, their practical applications in producing structurally reliable components are constrained by unresolved interfacial and process-control limitations.
