DOI: https://doi.org/10.30574/wjaets.2026.18.1.0001
تاريخ النشر: 2026-01-17
المؤلف: MD Toukir Yeasir Taimun وآخرون
الموضوع الرئيسي: التحول الرقمي في الصناعة
نظرة عامة
تقدم ورقة البحث إطار عمل للصيانة التنبؤية المدعومة بالتوأم الرقمي مصمم لأنظمة التصنيع النسيجية والميكانيكية، مع معالجة أوجه القصور في استراتيجيات الصيانة التقليدية التي تعتمد غالبًا على جداول ثابتة. من خلال دمج بيانات المستشعرات في الوقت الحقيقي، ونمذجة التوأم الرقمي، وتحليلات التنبؤ المدفوعة بالتعلم الآلي، يسهل الإطار مراقبة الحالة المستمرة، والكشف المبكر عن الأعطال، واتخاذ قرارات الصيانة المستندة إلى البيانات. تشير النتائج التجريبية والمحاكاة إلى أن هذا النهج يعزز بشكل كبير دقة الكشف عن الأعطال، وتوقعات العمر المتبقي المفيد، وتوافر النظام، ويقلل من تكاليف الصيانة مقارنة بالطرق التقليدية.
تؤكد النتائج على إمكانيات تكنولوجيا التوأم الرقمي كعامل تمكين حاسم للصيانة الذكية في بيئات التصنيع الحديثة، حيث تعتبر موثوقية التشغيل أمرًا بالغ الأهمية. ستهدف الأبحاث المستقبلية إلى التحقق من فعالية الإطار في البيئات الصناعية الكبيرة واستكشاف دمج نماذج التدهور المعتمدة على الفيزياء المتقدمة مع التقنيات المدفوعة بالبيانات لتعزيز قوة التنبؤ. بالإضافة إلى ذلك، ستستكشف الدراسة آليات التعلم التكيفي والفيدرالي لتحسين النموذج بشكل مستمر مع ضمان خصوصية البيانات، بالإضافة إلى توسيع الإطار ليشمل تحسين الطاقة، وجدولة الإنتاج، ومقاييس الاستدامة لتعظيم تأثيره في أنظمة التصنيع الذكية.
مقدمة
تسلط مقدمة الورقة الضوء على التحديات التي تواجه أنظمة التصنيع النسيجية والميكانيكية الحديثة، التي تعمل تحت ضغوط إنتاج عالية ومتطلبات جودة صارمة. غالبًا ما تفشل استراتيجيات الصيانة التقليدية، مثل الصيانة التصحيحية والوقائية، بسبب طبيعتها التفاعلية وعدم قدرتها على التكيف مع الظروف في الوقت الحقيقي. مع انتقال الصناعات نحو الصناعة 4.0، أصبحت الحاجة إلى حلول صيانة ذكية أمرًا بالغ الأهمية. تظهر تكنولوجيا التوأم الرقمي كعامل تمكين رئيسي للصيانة التنبؤية، حيث تقدم تمثيلًا افتراضيًا ديناميكيًا للأصول المادية الذي يزامن بيانات المستشعرات مع النماذج الحسابية. يسمح ذلك بمراقبة مستمرة لصحة النظام، ومحاكاة سيناريوهات الفشل، وتوقع الأداء المستقبلي، وهو أمر بالغ الأهمية بشكل خاص في البيئات التي تتعرض فيها الآلات لأنماط تآكل معقدة.
تناقش الورقة أيضًا تطور الصيانة التنبؤية (PdM) من طرق المراقبة القائمة على الحالة التقليدية إلى الأطر المدفوعة بالبيانات التي تستفيد من بيانات متعددة المستشعرات والتعلم الإحصائي. بينما اعتمدت أنظمة PdM التقليدية على إنذارات قائمة على العتبات، فإنها غالبًا ما تفتقر إلى القابلية للتكيف وفهم شامل على مستوى النظام للديناميات التشغيلية، مما يحد من فعاليتها في بيئات التصنيع المترابطة. تعزز تكنولوجيا التوأم الرقمي PdM من خلال تسهيل المزامنة في الوقت الحقيقي ودمج بيانات المستشعرات مع النماذج المعتمدة على الفيزياء، مما يحسن دقة التنبؤ ويقلل من عدم اليقين في تقدير العمر المتبقي المفيد (RUL). يهدف إطار العمل المقترح للصيانة التنبؤية المدعومة بالتوأم الرقمي إلى تحويل الرؤى التنبؤية إلى قرارات صيانة قابلة للتنفيذ، مما يحسن جدولة الصيانة لتقليل التوقف واستخدام الموارد مع ضمان استمرارية الإنتاج.
طرق
تهدف منهجية الصيانة التنبؤية المدعومة بالتوأم الرقمي (DT-PdM) المقترحة إلى تعزيز مراقبة الحالة المستمرة، وتسهيل الكشف المبكر عن الأعطال، ودعم اتخاذ قرارات الصيانة الذكية لأنظمة النسيج والميكانيكا. يدمج هذا الإطار عدة مكونات رئيسية، بما في ذلك استشعار إنترنت الأشياء الصناعي، ونمذجة التوأم الرقمي، وتحليلات التنبؤ المعتمدة على التعلم الآلي، وتحسين الصيانة، كل ذلك ضمن بنية متماسكة.
تم هيكلة المنهجية في أربع طبقات رئيسية، مصممة لضمان الوضوح وقابلية التوسع في التنفيذ. توضح الأشكال المضمنة في الورقة البنية العامة للنظام وتدفق البيانات بين الطبقات المادية والافتراضية، بالإضافة إلى سير العمل التشغيلي للصيانة التنبؤية باستخدام نهج التوأم الرقمي. يهدف هذا النهج المنظم إلى تحسين كفاءة وفعالية ممارسات الصيانة في الصناعات ذات الصلة.
نتائج
استخدم تقييم إطار العمل للصيانة التنبؤية المدعومة بالتوأم الرقمي (DT-PdM) مجموعات بيانات تشغيلية محاكاة من أنظمة الإنتاج النسيجية والميكانيكية. تشمل مؤشرات الأداء الرئيسية التي تم تقييمها دقة الكشف عن الأعطال، وتوقع العمر المتبقي المفيد (RUL)، وتوافر النظام، وكفاءة تكلفة الصيانة. تشير النتائج إلى أن إطار العمل DT-PdM يتفوق على الصيانة الوقائية التقليدية والنهج التنبؤية المدفوعة بالبيانات التي تفتقر إلى دمج التوأم الرقمي.
على وجه التحديد، أظهر دمج التوائم الرقمية تحسينًا كبيرًا في دقة التشخيص، وتعزيز جودة اتخاذ القرار، وزيادة موثوقية التشغيل. تؤكد هذه النتائج على إمكانيات تكنولوجيا التوأم الرقمي في تحسين استراتيجيات الصيانة وتقليل التكاليف التشغيلية في بيئات الإنتاج.
مناقشة
تسلط قسم المناقشة في الورقة الضوء على الاعتماد المستمر على ممارسات الصيانة القديمة في التصنيع النسيجي والميكانيكي، على الرغم من التقدم في التكنولوجيا. تفشل الصيانة الوقائية التقليدية ذات الفترات الثابتة في التكيف مع الظروف التشغيلية المتغيرة، مما يؤدي إلى إجراءات صيانة مبكرة أو متأخرة، مما يزيد من التوقف والتكاليف. يزيد نقص الرؤية على مستوى النظام عبر الآلات المترابطة من تفاقم هذه المشكلات، حيث يمكن أن تؤثر الأعطال في مكون واحد سلبًا على الآخرين. لمعالجة هذه التحديات، تقترح الورقة إطار عمل للصيانة التنبؤية المدعومة بالتوأم الرقمي (DT-PdM) الذي يدمج بيانات المستشعرات في الوقت الحقيقي، ونمذجة التوأم الرقمي، وتحليلات التعلم الآلي. يسمح هذا الإطار بجدولة صيانة ديناميكية بناءً على الظروف الفعلية للمعدات، مما يعزز الموثوقية ويقلل من التوقف غير المخطط له.
يظهر الإطار المقترح مساهمات كبيرة في الصيانة الذكية والتصنيع الذكي من خلال تقديم بنية شاملة مصممة لتلبية الاحتياجات الفريدة للأنظمة النسيجية والميكانيكية. يستخدم بفعالية بيانات المستشعرات في الوقت الحقيقي للتنبؤ الدقيق بالأعطال ومراقبة الحالة، مما يترجم الرؤى التنبؤية إلى قرارات صيانة قابلة للتنفيذ. تشير النتائج إلى أن إطار العمل DT-PdM يتفوق على استراتيجيات الصيانة التقليدية من حيث دقة الكشف عن الأعطال، وتوقع العمر المتبقي المفيد، وتوافر النظام بشكل عام. تؤكد النتائج على إمكانيات الإطار في قابلية التوسع والتكيف، مما يجعله مناسبًا لمجموعة متنوعة من بيئات التصنيع. تختتم الورقة بالتأكيد على الفوائد طويلة الأجل لاعتماد هذا النهج المبتكر، مما يبرر الاستثمار الأولي في بنية تحتية للمستشعرات والنمذجة. ستركز الأبحاث المستقبلية على النشر على نطاق واسع ودمج تقنيات التنبؤ المتقدمة لتعزيز فعالية الإطار في سياقات التصنيع الذكي.
DOI: https://doi.org/10.30574/wjaets.2026.18.1.0001
Publication Date: 2026-01-17
Author(s): MD Toukir Yeasir Taimun et al.
Primary Topic: Digital Transformation in Industry
Overview
The research paper presents a Digital Twin-Enabled Predictive Maintenance framework tailored for textile and mechanical manufacturing systems, addressing the shortcomings of traditional maintenance strategies that often rely on fixed schedules. By integrating real-time sensor data, digital twin modeling, and machine learning-driven predictive analytics, the framework facilitates continuous condition monitoring, early fault detection, and data-informed maintenance decision-making. Experimental and simulation results indicate that this approach significantly enhances fault detection accuracy, remaining useful life predictions, system availability, and reduces maintenance costs compared to conventional methods.
The findings underscore the potential of digital twin technology as a critical enabler for intelligent maintenance in modern manufacturing environments, where operational reliability is paramount. Future research will aim to validate the framework’s effectiveness in large-scale industrial settings and explore the integration of advanced physics-based degradation models with data-driven techniques to bolster prediction robustness. Additionally, the study will investigate adaptive and federated learning mechanisms for continuous model enhancement while ensuring data privacy, as well as extending the framework to incorporate energy optimization, production scheduling, and sustainability metrics to maximize its impact in smart manufacturing ecosystems.
Introduction
The introduction of the paper highlights the challenges faced by modern textile and mechanical manufacturing systems, which operate under high production pressures and stringent quality requirements. Traditional maintenance strategies, such as corrective and preventive maintenance, often fall short due to their reactive nature and inability to adapt to real-time conditions. As industries transition towards Industry 4.0, the need for intelligent maintenance solutions has become paramount. Digital twin technology emerges as a key enabler for predictive maintenance, offering a dynamic virtual representation of physical assets that synchronizes sensor data with computational models. This allows for continuous monitoring of system health, simulation of failure scenarios, and prediction of future performance, particularly crucial in environments where machinery experiences complex wear patterns.
The paper further discusses the evolution of predictive maintenance (PdM) from conventional condition-based monitoring methods to data-driven frameworks that leverage multisensor data and statistical learning. While traditional PdM systems have relied on threshold-based alarms, they often lack adaptability and a system-level understanding of operational dynamics, limiting their effectiveness in interconnected manufacturing settings. Digital twin technology enhances PdM by facilitating real-time synchronization and integrating sensor data with physics-based models, thereby improving prediction accuracy and reducing uncertainty in estimating remaining useful life (RUL). The proposed digital twin-enabled predictive maintenance framework aims to convert predictive insights into actionable maintenance decisions, optimizing maintenance scheduling to minimize downtime and resource usage while ensuring production continuity.
Methods
The proposed Digital Twin Enabled Predictive Maintenance (DT-PdM) methodology aims to enhance continuous condition monitoring, facilitate early fault detection, and support intelligent maintenance decision-making for textile and mechanical systems. This framework integrates several key components, including Industrial IoT sensing, digital twin modeling, machine learning-based predictive analytics, and maintenance optimization, all within a cohesive architecture.
The methodology is structured into four main layers, which are designed to ensure clarity and scalability in implementation. Figures included in the paper illustrate the overall system architecture and the data flow between physical and virtual layers, as well as the operational workflow for predictive maintenance utilizing the digital twin approach. This structured approach is intended to improve the efficiency and effectiveness of maintenance practices in relevant industries.
Results
The evaluation of the Digital Twin-Enabled Predictive Maintenance (DT-PdM) framework utilized simulated operational datasets from textile and mechanical production systems. Key performance indicators assessed included fault detection accuracy, remaining useful life (RUL) prediction, system availability, and maintenance cost efficiency. The findings indicate that the DT-PdM framework outperforms traditional preventive maintenance and data-driven predictive maintenance approaches lacking digital twin integration.
Specifically, the incorporation of digital twins was shown to significantly improve diagnostic accuracy, enhance decision-making quality, and bolster operational reliability. These results underscore the potential of digital twin technology in optimizing maintenance strategies and reducing operational costs in production environments.
Discussion
The discussion section of the paper highlights the persistent reliance on outdated maintenance practices in textile and mechanical manufacturing, despite advancements in technology. Traditional fixed interval preventive maintenance fails to adapt to varying operational conditions, leading to either premature or delayed maintenance actions, which increases downtime and costs. The lack of system-level visibility across interconnected machines exacerbates these issues, as failures in one component can adversely affect others. To address these challenges, the paper proposes a Digital Twin Enabled Predictive Maintenance (DT-PdM) framework that integrates real-time sensor data, digital twin modeling, and machine learning analytics. This framework allows for dynamic maintenance scheduling based on actual equipment conditions, thereby enhancing reliability and reducing unplanned downtime.
The proposed framework demonstrates significant contributions to intelligent maintenance and smart manufacturing by offering a comprehensive architecture tailored to the unique needs of textile and mechanical systems. It effectively utilizes real-time sensor data for accurate fault prediction and condition monitoring, translating predictive insights into actionable maintenance decisions. The results indicate that the DT-PdM framework outperforms traditional maintenance strategies in terms of fault detection accuracy, remaining useful life prediction, and overall system availability. The findings underscore the framework’s potential for scalability and adaptability, making it suitable for diverse manufacturing environments. The paper concludes by emphasizing the long-term benefits of adopting this innovative approach, which justifies the initial investment in sensor infrastructure and modeling. Future research will focus on large-scale deployment and the integration of advanced predictive techniques to further enhance the framework’s effectiveness in smart manufacturing contexts.
