DOI: https://doi.org/10.1038/s41598-026-58385-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42350499
تاريخ النشر: 2026-06-25
المؤلف: Arafa H. Aly
الموضوع الرئيسي: البلورات الضوئية والتطبيقات
نظرة عامة
تقدم هذه الدراسة مستشعر كريستالي ضوئي أحادي البعد (1D PhC) مصمم للكشف عالي الدقة عن معامل انكسار البول. يتكون المستشعر من طبقات متناوبة من TiO₂ و MgF₂، مما يشكل مرايا براج مع تجويف مركزي معيب مليء بالبول. تكشف المحاكاة العددية باستخدام طريقة مصفوفة النقل عن تحول أحمر مستقر لوضع العيب مع تغير معامل انكسار البول من 1.333 إلى 1.360، محققًا حساسية قدرها 388.57 نانومتر/RIU ويظهر خطية ممتازة (R² = 0.999989). كما يظهر المستشعر عرضًا كاملًا عند نصف الحد الأقصى (FWHM) متوسطًا قدره 0.0305 نانومتر، وعامل جودة (Q-factor) قدره 2.55 × 10⁴، ورقم جدوى (FOM) قدره 1.32 × 10² RIU⁻¹، مما يشير إلى انتقائية طيفية قوية وجودة استشعار عالية.
بالإضافة إلى ذلك، تؤكد تحليل التسامح أن المستشعر يحافظ على أدائه تحت تغيرات سمك ±2.5%، مما يبرز قوته ضد التباينات في التصنيع. تؤكد النتائج على أن أداء المستشعر يجب أن يتم تقييمه بناءً على مجموعة من الحساسية، وعرض الخط، وجودة الرنين، ورقم الجدوى، والتسامح الهيكلي. بشكل عام، يظهر المستشعر الكريستالي الضوئي الأحادي البعد المقترح إمكانات كبيرة للتطبيقات العملية في استشعار البيولوجيا الطبية المعتمدة على البول، مع عرض أداء متوازن مقارنةً بمنصات الاستشعار الضوئي الحالية.
النتائج
تقدم نتائج الدراسة تحليلًا مصقولًا لمستشعر كريستالي ضوئي أحادي البعد مصمم لاستشعار معامل انكسار البول. تم تحسين إجراء استخراج الرنين لتعزيز استقرار عرض الخط، وتم توسيع نطاق الاستشعار إلى معامل انكسار 1.360. تتيح تكوين المستشعر، الذي يتميز بمرايا براج من TiO₂/MgF₂ وتجويف معيب مليء بالبول، احتجازًا بصريًا قويًا، مما يؤدي إلى ظهور رنينات محلية داخل فجوة النطاق الضوئي. يتم تحديد الحساسية المحدثة للمستشعر عند 388.57 نانومتر/RIU مع خطية مثيرة للإعجاب قدرها $R^2 = 0.999989$، وينتقل طول موجة الرنين من 747.1120 نانومتر عند $n = 1.333$ إلى 757.6045 نانومتر عند $n = 1.360$، مما يظهر استقرارًا عبر النطاق الموسع.
تشير سلوك عرض الخط إلى زيادة تدريجية من 0.0221 نانومتر إلى 0.0402 نانومتر، مع الحفاظ على متوسط ضيق قدره 0.0305 نانومتر، وهو أمر حاسم للدقة الطيفية. يؤكد عامل الجودة، الذي يتراوح من $3.37 \times 10^4$ إلى $1.88 \times 10^4$، جودة رنين عالية على الرغم من الانخفاض مع زيادة عرض الخط. يظهر تحليل تسامح السمك أن المستشعر يظل قويًا ضد التباينات المعتدلة في التصنيع، مع قيم حساسية تتراوح من 381.77 نانومتر/RIU إلى 388.57 نانومتر/RIU تحت انحرافات سمك مختلفة. بشكل عام، يظهر المستشعر مجموعة مواتية من الحساسية العالية، وعرض الخط الضيق، واحتجاز المجال القوي، والتسامح الجيد في التصنيع، مما يضعه في موقع تنافسي بين منصات الاستشعار الضوئي الحالية مع التأكيد على مزاياه العملية من حيث بساطة التصنيع وتحليل الرنين.
المناقشة
تقدم الدراسة مستشعر كريستالي ضوئي أحادي البعد مصمم بطبقات متناوبة من أكسيد التيتانيوم (TiO₂) وفلوريد المغنيسيوم (MgF₂)، مع تجويف مركزي معيب مليء بالبول. تم تحليل الخصائص البصرية للجهاز باستخدام طريقة مصفوفة النقل (TMM)، مما سمح بحساب معامل النقل وتحديد وضع رنين محلي داخل فجوة النطاق الضوئي. هذا الرنين حساس للغاية لتغيرات معامل انكسار طبقة العيب، مما يشكل أساس آلية الكشف الخاصة بالمستشعر.
تم تقييم مقاييس الأداء مثل الحساسية، والعرض الكامل عند نصف الحد الأقصى (FWHM)، وعامل الجودة (Q)، ورقم الجدوى (FOM)، ودقة الكشف، وحد الكشف (LOD). أظهر المستشعر حساسية ملحوظة قدرها 388.57 نانومتر/RIU عبر نطاق معامل انكسار من 1.333 إلى 1.360، مع خطية قدرها \( R^2 = 0.999989 \). بالإضافة إلى ذلك، حقق عرض خط متوسط ضيق قدره 0.0305 نانومتر، وعامل جودة متوسط مرتفع قدره \( 2.55 \times 10^4 \)، ورقم جدوى كبير قدره \( 1.32 \times 10^2 \, \text{RIU}^{-1} \). أشار تحليل المجال الكهربائي إلى احتجاز قوي داخل التجويف المعطل، مما يعزز تفاعل الضوء مع المادة. ظل أداء المستشعر مستقرًا تحت تغيرات سمك معتدلة، مما يبرز قوته. بشكل عام، يمثل هذا المستشعر الكريستالي الضوئي تقدمًا واعدًا لاستشعار معامل الانكسار البيولوجي عالي الدقة، مقدمًا توازنًا بين الحساسية، والأداء الطيفي، والسلامة الهيكلية مقارنةً بالمنصات الحالية.
DOI: https://doi.org/10.1038/s41598-026-58385-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42350499
Publication Date: 2026-06-25
Author(s): Arafa H. Aly
Primary Topic: Photonic Crystals and Applications
Overview
This research presents a defect-engineered one-dimensional photonic crystal (1D PhC) sensor designed for high-resolution detection of urine refractive index. The sensor comprises alternating layers of TiO₂ and MgF₂, forming Bragg mirrors with a central defect cavity filled with urine. Numerical simulations using the transfer matrix method reveal a stable red shift of the defect mode as the refractive index of urine varies from 1.333 to 1.360, achieving a sensitivity of 388.57 nm/RIU and exhibiting excellent linearity (R² = 0.999989). The sensor also demonstrates an average full width at half maximum (FWHM) of 0.0305 nm, a quality factor (Q-factor) of 2.55 × 10⁴, and a figure of merit (FOM) of 1.32 × 10² RIU⁻¹, indicating strong spectral selectivity and high sensing quality.
Additionally, a tolerance analysis confirms that the sensor maintains its performance under ±2.5% thickness variations, highlighting its robustness against fabrication discrepancies. The findings emphasize that sensor performance should be evaluated based on a combination of sensitivity, linewidth, resonance quality, figure of merit, and structural tolerance. Overall, the proposed 1D photonic crystal sensor demonstrates significant potential for practical applications in urine-based biomedical sensing, showcasing a balanced performance compared to existing photonic sensing platforms.
Results
The results of the study present a refined analysis of a one-dimensional photonic crystal sensor designed for urine refractive-index sensing. The resonance extraction procedure was improved to enhance linewidth stability, and the sensing range was extended to a refractive index of 1.360. The sensor configuration, featuring TiO₂/MgF₂ Bragg mirrors and a urine-filled defect cavity, enables strong optical confinement, leading to the emergence of localized resonances within the photonic band gap. The updated sensitivity of the sensor is quantified at 388.57 nm/RIU with an impressive linearity of $R^2 = 0.999989$, and the resonance wavelength shifts from 747.1120 nm at $n = 1.333$ to 757.6045 nm at $n = 1.360$, demonstrating stability across the extended range.
The linewidth behavior indicates a gradual increase from 0.0221 nm to 0.0402 nm, maintaining a narrow average of 0.0305 nm, which is crucial for spectral resolution. The Q-factor, ranging from $3.37 \times 10^4$ to $1.88 \times 10^4$, confirms high resonance quality despite a decrease with increasing linewidth. A thickness-tolerance analysis shows that the sensor remains robust against moderate fabrication variations, with sensitivity values ranging from 381.77 nm/RIU to 388.57 nm/RIU under different thickness deviations. Overall, the sensor exhibits a favorable combination of high sensitivity, narrow linewidth, strong field localization, and good fabrication tolerance, positioning it competitively among existing photonic sensing platforms while emphasizing its practical advantages in terms of fabrication simplicity and resonance analysis.
Discussion
The research presents a one-dimensional photonic crystal sensor engineered with alternating layers of titanium dioxide (TiO₂) and magnesium fluoride (MgF₂), featuring a central defect cavity filled with urine. The optical characteristics of the device were analyzed using the transfer matrix method (TMM), which allowed for the calculation of the transmission coefficient and the identification of a localized resonance mode within the photonic band gap. This resonance is highly sensitive to variations in the refractive index of the defect layer, forming the basis for the sensor’s detection mechanism.
Performance metrics such as sensitivity, full width at half maximum (FWHM), quality factor (Q), figure of merit (FOM), detection accuracy, and limit of detection (LOD) were evaluated. The sensor demonstrated a remarkable sensitivity of 388.57 nm/RIU across a refractive index range of 1.333 to 1.360, with a linearity of \( R^2 = 0.999989 \). Additionally, it achieved a narrow average linewidth of 0.0305 nm, a high average Q-factor of \( 2.55 \times 10^4 \), and a significant FOM of \( 1.32 \times 10^2 \, \text{RIU}^{-1} \). The electric-field analysis indicated strong confinement within the defect cavity, enhancing light-matter interaction. The sensor’s performance remained stable under moderate thickness variations, underscoring its robustness. Overall, this photonic crystal sensor represents a promising advancement for high-resolution biomedical refractive-index sensing, offering a balance of sensitivity, spectral performance, and structural integrity compared to existing platforms.
