DOI: https://doi.org/10.3389/fams.2026.1765200
تاريخ النشر: 2026-05-14
المؤلف: Azzah Mustafa Abdulqader وآخرون
الموضوع الرئيسي: مراقبة العمليات الإحصائية المتقدمة
نظرة عامة
تقدم هذه الدراسة نهجًا جديدًا لمراقبة الجودة من خلال استخدام مخططات التحكم المعتمدة على الموجات المتقطعة، مع التركيز بشكل خاص على استخدام موجات هار وموجات ماير المتقطعة (Dmey). تركز مخططات التحكم الفردية التقليدية بشكل أساسي على مراقبة موقع العملية، مما يوفر رؤى محدودة حول التشتت. تستفيد الطريقة المقترحة من تحويل الموجات المتقطعة (DWT) لاستخراج معاملات التقريب والتفاصيل من بيانات المرحلة الأولى، مما يسمح بالمراقبة المنفصلة للمتوسط والانحراف. يتم بناء مخططات التحكم لهذه المعاملات الطبيعية ومقارنتها بمخططات الأفراد التقليدية.
تشير النتائج إلى أن المخططات المعتمدة على الموجات تظهر حدود تحكم أضيق وحساسية محسنة. في محاكاة مونت كارلو، تم تقليل عرض حدود التحكم لمخطط الأفراد من $D = 6.2974$ إلى $D = 3.9867$ لمخطط تفاصيل Dmey، مما يمثل انخفاضًا بنسبة 36.7%. في تطبيق عملي يتعلق بمستويات الحديد في مصل حديثي الولادة، أظهر مخطط الأفراد $D = 92.0192$، بينما حسّن مخطط تفاصيل هار هذا إلى $D = 59.4071$، وهو انخفاض بنسبة تقارب 35.4%. تؤكد النتائج فعالية المخططات المعتمدة على التفاصيل في مراقبة التباين، مما يحسن حساسية الكشف عن عمليات الملاحظة الفردية من خلال دمج تحليل الموجات في مراقبة العمليات الإحصائية.
مقدمة
تستعرض مقدمة هذه الورقة البحثية تطور وأهمية مخططات مراقبة الجودة في صناعات التصنيع والخدمات، متتبعة أصولها إلى عمل والتر أ. شيوهارت في عشرينيات القرن الماضي. تسلط الورقة الضوء على التقدم في مراقبة العمليات الإحصائية (SPC) الذي قاده شخصيات مؤثرة مثل و. إدواردز ديمينغ وجوزيف جيران، بالإضافة إلى دمج تقنيات الحوسبة التي حسنت من قدرات التحليل في الوقت الحقيقي. يتم مناقشة تطور محوري وهو اعتماد تقنيات تحويل الموجات المتقطعة (DWT) في التسعينيات، والتي تسهل التحليل متعدد الدقة للإشارات، مما يسمح بتحسين الكشف عن تباينات العمليات مقارنة بمخططات شيوهارت التقليدية.
يؤكد المؤلفون على مزايا مخططات التحكم المعتمدة على الموجات، وخاصة تلك التي تستخدم موجات هار وموجات Dmey، في مراقبة كل من متوسط العملية والانحراف. تُعرف هذه الموجات بقدرتها على اكتشاف التغيرات الطفيفة وتوفير معالجة قوية للضوضاء. تتناول الورقة أيضًا التحول نحو نماذج المراقبة الهجينة التي تدمج التعلم الآلي والأساليب الإحصائية المتقدمة، مما يعكس التأثير المتزايد للذكاء الاصطناعي في المراقبة الصناعية. يهدف الإطار المقترح إلى بناء مخططات تحكم جديدة تعتمد على معاملات DWT التي يمكن أن تلتقط في الوقت نفسه تغييرات الموقع والتباين، وتم التحقق منها من خلال المحاكاة وتطبيق في مجال الرعاية الصحية. تشير النتائج إلى أن المراقبة المعتمدة على الموجات تقدم حساسية محسنة وقدرات مراقبة مزدوجة، مما يمثل مساهمة كبيرة في مجال مراقبة العمليات الإحصائية ومعالجة الإشارات.
مناقشة
تتناول قسم المناقشة في الورقة تطوير وتقييم مخططات التحكم الفردية باستخدام تحويلات الموجات، وخاصة موجات هار وموجات Dmey. تم تصميم مخطط التحكم الفردي، المقترن بمخطط النطاق المتحرك، لمراقبة العمليات حيث يتم إجراء الملاحظات بشكل تدريجي. يتم تعريف الحدود العليا والسفلى للتحكم (UCL و LCL) باستخدام متوسط العملية ($\mu$) والانحراف المعياري ($\sigma$)، مما يسمح بالكشف الفعال عن الظروف الخارجة عن السيطرة. يتم استخدام موجة هار، التي تتميز ببساطتها، وموجة Dmey، المعروفة بخصائصها المتعامدة، لإنشاء مخططات جديدة تراقب كل من المتوسط والانحراف للملاحظات، مما يعزز حساسية مخططات التحكم الفردية تجاه تغييرات العملية.
تقوم دراسة المحاكاة بمقارنة المخططات المعتمدة على الموجات المقترحة ضد مخططات الملاحظات الفردية التقليدية، مما يظهر أداءً متفوقًا في الكشف عن التحولات في متوسط العملية والانحراف. تشير النتائج إلى أن مخططات هار وDmey تتقارب بشكل أسرع إلى إشارات خارجة عن السيطرة، مما يوفر فصلًا أوضح بين الحالات تحت السيطرة وخارج السيطرة. تكشف النتائج أن المخططات المقترحة تحافظ على حدود تحكم أضيق (قيم D أقل)، مما يشير إلى حساسية أكبر واستقرار في مراقبة العمليات. بشكل عام، تؤكد الدراسة على فعالية فصل معاملات التقريب والتفاصيل في مخططات التحكم، مما يوفر نهجًا أكثر تشخيصًا لمراقبة العمليات مقارنة بالأساليب الحالية.
DOI: https://doi.org/10.3389/fams.2026.1765200
Publication Date: 2026-05-14
Author(s): Azzah Mustafa Abdulqader et al.
Primary Topic: Advanced Statistical Process Monitoring
Overview
This study introduces a novel approach to quality control by employing discrete wavelet-based control charts, specifically utilizing Haar and discrete Meyer (Dmey) wavelets. Traditional individual control charts primarily focus on monitoring process location, offering limited insights into dispersion. The proposed method leverages discrete wavelet transform (DWT) to extract approximation and detail coefficients from Phase I data, allowing for the separate monitoring of mean and variance. Control charts are constructed for these normalized coefficients and compared to classical individuals charts.
The findings indicate that the wavelet-based charts exhibit narrower control limits and enhanced sensitivity. In Monte Carlo simulations, the control-limit width for the individuals chart was reduced from $D = 6.2974$ to $D = 3.9867$ for the Dmey detail chart, representing a 36.7% decrease. In a practical application involving neonatal serum iron levels, the individuals chart showed $D = 92.0192$, while the Haar detail chart improved this to $D = 59.4071$, a reduction of approximately 35.4%. The results underscore the effectiveness of detail-based charts in monitoring variance, thereby improving detection sensitivity for individual-observation processes through the integration of wavelet decomposition in statistical process control.
Introduction
The introduction of this research paper outlines the evolution and significance of quality control charts in manufacturing and service industries, tracing their origins to Walter A. Shewhart’s work in the 1920s. The paper highlights the advancements in Statistical Process Control (SPC) driven by influential figures like W. Edwards Deming and Joseph Juran, as well as the integration of computing technologies that have enhanced real-time analysis capabilities. A pivotal development discussed is the adoption of discrete wavelet transform (DWT) techniques in the 1990s, which facilitate multi-resolution analysis of signals, allowing for improved detection of process variations compared to traditional Shewhart charts.
The authors emphasize the advantages of wavelet-based control charts, particularly those utilizing Haar and Dmey wavelets, in monitoring both process mean and variance. These wavelets are noted for their ability to detect subtle changes and provide robust noise handling. The paper also addresses the shift towards hybrid monitoring paradigms that incorporate machine learning and advanced statistical methods, reflecting the growing influence of artificial intelligence in industrial monitoring. The proposed framework aims to construct new control charts based on DWT coefficients that can simultaneously capture location and variability changes, validated through simulations and a real-world healthcare application. The findings indicate that wavelet-based monitoring offers enhanced sensitivity and dual-monitoring capabilities, marking a significant contribution to the field of statistical process control and signal processing.
Discussion
The discussion section of the paper elaborates on the development and evaluation of individual control charts using wavelet transforms, specifically the Haar and Dmey wavelets. The individual control chart, paired with the moving range chart, is designed for monitoring processes where observations are made incrementally. The upper and lower control limits (UCL and LCL) are defined using the process mean ($\mu$) and standard deviation ($\sigma$), allowing for effective detection of out-of-control conditions. The Haar wavelet, characterized by its simplicity, and the Dmey wavelet, known for its orthogonal properties, are employed to create new charts that monitor both average and variance of observations, enhancing the sensitivity of individual control charts to process changes.
The simulation study compares the proposed wavelet-based charts against traditional individual observation charts, demonstrating superior performance in detecting shifts in process mean and variance. Results indicate that the Haar and Dmey charts converge more rapidly to out-of-control signals, providing clearer separation between in-control and out-of-control states. The findings reveal that the proposed charts maintain narrower control limits (lower D values), indicating greater sensitivity and stability in monitoring processes. Overall, the study emphasizes the effectiveness of separating approximation and detail coefficients in control charts, offering a more diagnostic approach to process monitoring than existing methodologies.
