تعزيز الأداء وخصائص الاحتراق والانبعاثات لمحرك CRDI باستخدام خلطات وقود ثلاثية من الديزل-استر ميثيل زيت الطعام-ديغلايم مع أنابيب الكربون النانوية Amplifying performance, combustion, and emission characteristics of a CRDI engine using diesel-WCO methyl ester-dyglyme ternary fuel blends with carbon nanotubes

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-43211-6
PMID: https://pubmed.ncbi.nlm.nih.gov/41794987
تاريخ النشر: 2026-03-07
المؤلف: Sarojini Jajimoggala وآخرون
الموضوع الرئيسي: إنتاج واستخدامات الوقود الحيوي

نظرة عامة

تدرس الدراسة تأثير دمج أنابيب الكربون النانوية في خلطات الوقود الثلاثية من الديزل وزيت الطهي المستعمل (WCO20) وديغليمو (DGM) على الأداء وخصائص الاحتراق والانبعاثات لمحرك ديزل ذو أسطوانة مزدوجة، 4 أشواط، حقن مباشر مشترك (CRDI). تم إعداد الخلطات بتركيزات متغيرة من الجسيمات النانوية (NPs) عند 25 و50 و75 ملغ/لتر. تشير النتائج إلى تحسينات كبيرة في مقاييس الأداء، حيث تحسن الكفاءة الحرارية للفرامل (BTE) بنسبة 15.15% وانخفض استهلاك الوقود المحدد للفرامل (BSFC) بنسبة 16.5% مقارنة بخلطة WCO20 عند أقصى قدرة للفرامل.

أكدت تقنيات التوصيف مثل المجهر الإلكتروني الماسح بالانبعاث الميداني (FESEM) والمجهر الإلكتروني الناقل عالي الدقة (HRTEM) وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR) وطيف الأشعة فوق البنفسجية على استقرار وثبات عينات الوقود المعدة. بالإضافة إلى ذلك، كشفت اختبارات الموصلية الحرارية أن عينات الوقود الثلاثي المدمجة بالنانو (TF) أظهرت أعلى موصلية حرارية عند 50 درجة مئوية. تُعزى التحسينات الملحوظة في أداء المحرك إلى تحسين الخصائص الفيزيائية والكيميائية، وخصائص الرش المتفوقة، وزيادة الانتشار الحراري، وتقليل تأخير الاشتعال، وعمليات الاحتراق الأكثر فعالية التي تسهلها التأثيرات التآزرية لإضافات DGM وNP.

مقدمة

تسلط المقدمة الضوء على القضية الملحة لنفاد الطاقة والاحترار العالمي، المدفوعة أساسًا بالزيادة في استخدام الوقود الأحفوري في السيارات. لقد دفعت هذه الأزمة البيئية إلى اهتمام متزايد بالديزل الحيوي كمصدر بديل للطاقة. يُشتق الديزل الحيوي من الزيوت غير الصالحة للأكل، ويُعترف به لاستدامته وإمكانية تقليل الانبعاثات، مما يجعله خيارًا جذابًا لمحركات الديزل. يتميز بأنه محايد للكربون، مما يساهم في تقليل صافي انبعاثات الكربون عند الاحتراق.

ومع ذلك، تشير المقدمة أيضًا إلى قيود الديزل الحيوي عند استخدامه مباشرة في محركات الاشتعال بالضغط (CI)، لا سيما أدائه غير الكافي وخصائص تدفقه البارد الضعيفة، مما قد يؤدي إلى تكوين جل الوقود في المناخات الباردة. للتخفيف من هذه المشكلات، يتم عادةً خلط الديزل الحيوي مع الديزل التقليدي بتركيز يصل إلى 20% من حيث الحجم، مما يعزز قابليته للاستخدام مع الحفاظ على أداء المحرك.

طرق

في هذا القسم، يصف المؤلفون المواد والمنهجية المستخدمة في تحقيقهم حول زيوت القلي العميق المستمدة من مصادر غذائية قابلة للأكل متنوعة، بما في ذلك النخيل وعباد الشمس والذرة وفول الصويا والقرطم. تستخدم الدراسة محرك احتراق بالضغط (CI) ذو أسطوانة مزدوجة، 4 أشواط، حقن مباشر مشترك (CRDI)، مزود بنظام إمداد بالوقود شامل ومجموعة متنوعة من المستشعرات لقياس معلمات مثل نسبة الهواء إلى الوقود والضغط ودرجة الحرارة. يتم تسهيل جمع البيانات من خلال جهاز كمبيوتر مزود ببرامج محرك مثبتة مسبقًا، مما يسمح بتحليل مفصل لأداء المحرك والانبعاثات.

تشمل الإعدادات التجريبية محلل غاز (MARS Technologies Model: MN-05) ومقياس دخان (Model: SM-05) لقياس الانبعاثات. يشير المؤلفون إلى القانون الأول للديناميكا الحرارية، ويطبقون معادلة هايوود لتقييم معدل إطلاق الحرارة (HRR) على مدى 100 دورة، تحديدًا بين فترة الاحتراق الفعلية ونقطة الضغط القصوى. تُعرض المعادلة كما يلي:

\[
dQ_{\text{total}} d\theta = \left( \frac{\gamma \cdot \text{sp. heat}}{\gamma \cdot \text{sp. heat} – 1} \right) (P_{\text{cyl}}) \left( \frac{dV}{d\theta} \right) + \left( \frac{1}{\gamma \cdot \text{sp. heat} – 1} \right) (V) \left( \frac{dP}{d\theta} \right) + \left( \frac{dQ_w}{d\theta} \right)
\]

تهدف هذه الإطار المنهجي إلى تقديم رؤى حول خصائص الاحتراق وملفات الانبعاثات للزيوت المختبرة.

نتائج

تستكشف نتائج هذه الدراسة أداء وخصائص الاحتراق والانبعاثات لمحرك احتراق بالضغط (CI) ذو حقن مباشر مشترك (CRDI) باستخدام عينات وقود متنوعة: D100 وWCO20 وTF وTF+CNT25 وTF+CNT50 وTF+CNT75، جميعها تم اختبارها عند ضغط حقن (IP) قدره 500 بار. في البداية، تم تشغيل المحرك على الديزل لمدة 30 دقيقة لتحقيق ظروف الحالة الثابتة، مما أسس خط أساس للأداء والانبعاثات. تم إجراء اختبارات لاحقة على خلطات الوقود البديلة، حيث تم اختبار كل عينة خمس مرات لتقليل أخطاء القياس.

تشير النتائج إلى تحسين عام في أداء المحرك عند استخدام خلطات الوقود المختبرة، لا سيما عند قدرة الفرامل العالية (BP). بالإضافة إلى ذلك، لوحظ انخفاض في الانبعاثات، مما يشير إلى أن الوقود البديل قد يقدم حلاً قابلاً للتطبيق لتحسين كفاءة المحرك وتأثيره البيئي. تتناول المناقشات اللاحقة هذه النتائج، مسلطة الضوء على الآثار المترتبة على تطوير الوقود المستقبلي وتحسين المحرك.

مناقشة

تسلط قسم المناقشة من ورقة البحث الضوء على تأثيرات الديزل الحيوي ومختلف الإضافات على أداء محرك الديزل والانبعاثات. تركز الدراسة بشكل أساسي على خلط B20 (20% ديزل حيوي، 80% ديزل) وتأثيره على الانبعاثات مثل الهيدروكربونات (HC) وأول أكسيد الكربون (CO) وأكاسيد النيتروجين (NOx). بينما يقلل خلط B20 عمومًا من HC وCO والدخان والانبعاثات الجسيمية، فإنه يؤدي إلى زيادة طفيفة في انبعاثات NOx بسبب محتوى الأكسجين الأعلى ودرجات حرارة غاز العادم. لقد ثبت أن دمج إعادة تدوير غاز العادم (EGR) يخفف من انبعاثات NOx بشكل فعال دون التأثير سلبًا على الملوثات الأخرى.

تناقش الورقة أيضًا استخدام الإضافات الكحولية، لا سيما الن-butanol وديغليمو (DGM)، التي تعزز الخصائص الفيزيائية والكيميائية للوقود، وتحسن كفاءة الاحتراق، وتقلل الانبعاثات. على سبيل المثال، أظهر إضافة الن-butanol في خلطات الديزل الحيوي-ديزل انخفاضًا كبيرًا في انبعاثات NOx مع الحفاظ على الأداء. علاوة على ذلك، تم الإبلاغ عن أن إدخال الجسيمات النانوية القائمة على الكربون (NPs)، مثل أنابيب الكربون (CNTs) والغرافيت، يعزز خصائص الاحتراق ويقلل الانبعاثات بفضل خصائصها الحرارية والحفزية المتفوقة. تهدف التحقيقات الحالية إلى تقييم أداء وانبعاثات خلط وقود جديد يحتوي على DGM وCNTs في محرك ديزل، مما يساهم في تطوير خيارات وقود أكثر استدامة لمحركات الديزل.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-43211-6
PMID: https://pubmed.ncbi.nlm.nih.gov/41794987
Publication Date: 2026-03-07
Author(s): Sarojini Jajimoggala et al.
Primary Topic: Biodiesel Production and Applications

Overview

The study investigates the impact of incorporating carbon nanotubes into ternary fuel blends of diesel, waste cooking oil (WCO20), and dyglyme (DGM) on the performance, combustion, and emission characteristics of a twin-cylinder, 4-stroke common rail direct injection (CRDI) diesel engine. The blends were prepared with varying concentrations of nanoparticles (NPs) at 25, 50, and 75 mg/l. The results indicate significant enhancements in performance metrics, with brake thermal efficiency (BTE) improving by 15.15% and brake specific fuel consumption (BSFC) decreasing by 16.5% compared to the WCO20 blend at maximum brake power.

Characterization techniques such as field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared spectroscopy (FTIR), and UV spectroscopy confirmed the stability and consistency of the prepared fuel samples. Additionally, thermal conductivity tests revealed that the nano-included ternary fuel (TF) samples exhibited the highest thermal conductivity at 50°C. The observed improvements in engine performance are attributed to enhanced physicochemical properties, superior spray characteristics, increased thermal diffusivity, reduced ignition delay, and more effective combustion processes facilitated by the synergistic effects of DGM and NP additives.

Introduction

The introduction highlights the urgent issue of energy depletion and global warming, primarily driven by the increasing use of fossil fuels in automobiles. This environmental crisis has prompted a growing interest in biodiesel as a viable alternative energy source. Biodiesel, derived from non-edible oils, is recognized for its sustainability and potential to reduce emissions, making it an attractive option for diesel engines. It is characterized as carbon neutral, contributing to lower net carbon emissions upon combustion.

However, the introduction also notes the limitations of biodiesel when used directly in compression ignition (CI) engines, particularly its inadequate performance and poor cold flow properties, which can lead to fuel gel formation in colder climates. To mitigate these issues, biodiesel is typically blended with conventional diesel at a concentration of up to 20% by volume, enhancing its usability while maintaining engine performance.

Methods

In this section, the authors describe the materials and methodology employed in their investigation of deep-frying oils derived from various edible feedstocks, including palm, sunflower, corn, soybean, and safflower. The study utilizes a twin-cylinder, 4-stroke, common rail direct injection (CRDI) compression ignition (CI) engine, equipped with a comprehensive fuel supply system and various sensors for measuring parameters such as air-fuel ratio, pressure, and temperature. Data acquisition is facilitated through a computer with pre-installed engine software, allowing for detailed analysis of engine performance and emissions.

The experimental setup includes a gas analyzer (MARS Technologies Model: MN-05) and a smoke meter (Model: SM-05) for emissions measurement. The authors reference the first law of thermodynamics, applying Heywood’s equation to evaluate the heat release rate (HRR) over 100 cycles, specifically between the actual combustion period and the peak pressure point. The equation is presented as follows:

\[
dQ_{\text{total}} d\theta = \left( \frac{\gamma \cdot \text{sp. heat}}{\gamma \cdot \text{sp. heat} – 1} \right) (P_{\text{cyl}}) \left( \frac{dV}{d\theta} \right) + \left( \frac{1}{\gamma \cdot \text{sp. heat} – 1} \right) (V) \left( \frac{dP}{d\theta} \right) + \left( \frac{dQ_w}{d\theta} \right)
\]

This methodological framework aims to provide insights into the combustion characteristics and emissions profiles of the tested oils.

Results

The results of this study investigate the performance, combustion, and emission characteristics of a Common Rail Direct Injection (CRDI) Compression Ignition (CI) engine using various fuel samples: D100, WCO20, TF, TF+CNT25, TF+CNT50, and TF+CNT75, all tested at an injection pressure (IP) of 500 bar. Initially, the engine was operated on diesel for 30 minutes to achieve steady-state conditions, establishing a baseline for performance and emissions. Subsequent tests on the alternative fuel mixtures were conducted, with each sample being tested five times to minimize measurement errors.

The findings indicate an overall enhancement in engine performance when utilizing the tested fuel mixtures, particularly at higher brake power (BP). Additionally, a reduction in emissions was observed, suggesting that the alternative fuels may offer a viable solution for improving engine efficiency and environmental impact. Further discussions elaborate on these results, highlighting the implications for future fuel development and engine optimization.

Discussion

The discussion section of the research paper highlights the effects of biodiesel and various additives on diesel engine performance and emissions. The study primarily focuses on a B20 blend (20% biodiesel, 80% diesel) and its impact on emissions such as hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx). While the B20 blend generally reduces HC, CO, smoke, and particulate emissions, it leads to a slight increase in NOx emissions due to the higher oxygen content and exhaust gas temperatures. The incorporation of exhaust gas recirculation (EGR) has been shown to mitigate NOx emissions effectively without adversely affecting other pollutants.

The paper also discusses the use of alcohol additives, particularly n-butanol and diglyme (DGM), which enhance the fuel’s physicochemical properties, improve combustion efficiency, and reduce emissions. For instance, the addition of n-butanol in biodiesel-diesel blends has been shown to significantly lower NOx emissions while maintaining performance. Furthermore, the introduction of carbon-based nanoparticles (NPs), such as carbon nanotubes (CNTs) and graphene, has been reported to enhance combustion characteristics and reduce emissions due to their superior thermal and catalytic properties. The current investigation aims to evaluate the performance and emissions of a novel fuel blend containing DGM and CNTs in a diesel engine, contributing to the development of more sustainable fuel options for diesel engines.