تقدير قوى رد الفعل الأرضي في مشية مرضى باركنسون باستخدام التعلم العميق ومجموعة محسّنة من بيانات وحدات القياس التسارعية Deep Learning-Based Estimation of Ground Reaction Forces in Parkinsonian Gait Using an Optimized Set of IMU Data

شارك:
المجلة: IEEE Transactions on Neural Systems and Rehabilitation Engineering، المجلد: 34
DOI: https://doi.org/10.1109/tnsre.2026.3697513
PMID: https://pubmed.ncbi.nlm.nih.gov/42202182
تاريخ النشر: 2026-01-01
المؤلف: Run Lin وآخرون
الموضوع الرئيسي: التوازن، والمشي، والوقاية من السقوط

نظرة عامة

تقدم هذه الدراسة إطار عمل جديد للتعلم العميق يستخدم بنية هجينة من CNN-BiLSTM لتقدير قوى رد الفعل الأرضي العمودية الثنائية (vGRFs) لدى مرضى باركنسون (PD) باستخدام وحدات قياس القصور الذاتي القابلة للارتداء (IMUs). شملت الدراسة تدريب النموذج على بيانات من 61 مريضًا بباركنسون و65 شخصًا سليمًا (HC) مع 13 IMU، محققة دقة عالية داخل الموضوع (R² = 0.98) وتعميم قوي بين الموضوعات (R² = 0.93 لـ HC وR² = 0.91 لـ PD). تشير النتائج إلى أن تكوين المستشعر يؤثر بشكل كبير على دقة التقدير، حيث تختلف المواقع المثلى بين مرضى PD وHC. من الجدير بالذكر أن الدقة انخفضت بشكل كبير عند استخدام IMU واحد، بينما تم الحصول على أفضل أداء مع أربعة IMUs.

تخلص الدراسة إلى أن إطار العمل المقترح للتعلم العميق يظهر دقة عالية (R² ≥ 0.91) عبر ظروف المشي المختلفة وتنوع الأفراد، مما يبرز إمكانيته للتطبيقات الواقعية في تقييم المشي السريري والمراقبة عن بُعد. تحدد الدراسة تكوينات المستشعر المثلى التي تعزز القابلية للارتداء دون المساس بالأداء، مشيرة إلى أن إعدادًا بسيطًا مع اثنين من IMUs (LD وFH) يمكن أن يحقق دقة مماثلة. تمهد هذه الدراسة الطريق لتطوير أنظمة تحليل المشي الذكية المصممة للأفراد الذين يعانون من اضطرابات الحركة المرضية، مقدمة حلولًا قابلة للتوسع لإعادة التأهيل والمراقبة الشخصية في الفئات السكانية العصبية.

مقدمة

تسلط مقدمة ورقة البحث الضوء على الزيادة المتوقعة في انتشار مرض باركنسون (PD)، مع تقديرات تشير إلى أن 25.2 مليون شخص سيتأثرون بحلول عام 2050. تمثل هذه الزيادة تحديات كبيرة للصحة العامة، مما يستلزم مراقبة فعالة للمشي من خلال قوى رد الفعل الأرضي (GRFs)، وخاصة قوى رد الفعل الأرضي العمودية (vGRFs). تعتبر هذه القوى مؤشرات حاسمة على استقرار الوضعية، وعدم التوازن في التحميل، ومخاطر السقوط لدى مرضى PD. بينما تعتبر الألواح القوة المعيار الذهبي لقياس vGRFs، فإن استخدامها محدود في البيئات المسيطر عليها، مما يدفع لاستكشاف طرق بديلة مثل الأحذية الحساسة للقوة والأحذية الداخلية المزودة بأجهزة استشعار، والتي تواجه أيضًا قيودًا عملية. بالمقابل، تقدم المستشعرات القابلة للارتداء، وخاصة وحدات قياس القصور الذاتي (IMUs)، حلاً محمولًا وفعالًا من حيث التكلفة لتقييم المشي المستمر.

تناقش الورقة النهجين الرئيسيين لتقدير GRFs باستخدام IMUs: الطرق المعتمدة على الفيزياء والطرق المعتمدة على البيانات. بينما تعتبر النماذج المعتمدة على الفيزياء قابلة للتفسير، إلا أنها غالبًا ما تواجه صعوبات مع تعقيدات المشي المرضي بسبب اعتمادها على افتراضات ميكانيكية حيوية محددة مسبقًا. بالمقابل، أظهرت النماذج المعتمدة على البيانات، بما في ذلك خوارزميات التعلم الآلي، وعدًا في التقاط أنماط الحركة المعقدة ولكن تم التحقق منها بشكل أساسي في الفئات السليمة. تحدد المقدمة الفجوات الكبيرة في الأدبيات، خاصة فيما يتعلق بتطبيق هذه المنهجيات على مشي PD، وتأثير وضع IMU على دقة التقدير، والحاجة إلى تقييم منهجي لتكوينات المستشعر. لمعالجة هذه الفجوات، تقترح الدراسة إطار عمل للتعلم العميق يستخدم نموذج الشبكة العصبية التلافيفية-ذاكرة طويلة وقصيرة المدى ثنائية الاتجاه (CNN-BiLSTM) لتقدير vGRFs العمودية الثنائية لدى الأفراد المصابين بـ PD، بهدف تعزيز تحليل المشي في كل من الإعدادات السريرية والمنزلية.

طرق البحث

تقدم الدراسة شبكة عصبية تلافيفية (CNN) مدمجة مع بنية ذاكرة طويلة وقصيرة المدى ثنائية الاتجاه (BiLSTM) لتطوير إطار عمل للتقدير التسلسلي يهدف إلى تقدير قوى رد الفعل الأرضي العمودية الثنائية (vGRF) من البيانات التي تم جمعها بواسطة مستشعرات وحدات قياس القصور الذاتي القابلة للارتداء (IMU). تم تدريب الإطار بشكل صارم وتقييمه باستخدام بيانات المشي من كل من الأشخاص الأصحاء (HC) ومرضى باركنسون (PD)، مع معالجة كل من التباين داخل الموضوع وبين الموضوعات.

بالإضافة إلى التحليل الأساسي الذي يستخدم مجموعة بيانات IMU القابلة للارتداء، قام الباحثون بإجراء تحقق خارجي عبر مجموعة بيانات مستقلة من المشاركين في PD. كما شملت الدراسة مقارنات نموذجية أساسية وتحليلات لتكوينات المستشعر داخل مجموعة PD تحت ظروف بين الموضوعات، مما يوفر تقييمًا شاملاً لأداء الإطار المقترح وموثوقيته.

النتائج

يقدم قسم “النتائج” نتائج الدراسة، موضحًا نتائج التجارب التي تم إجراؤها. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد البحث، حيث تكشف التحليلات الإحصائية عن قيمة p أقل من 0.05، مما يشير إلى أن النتائج ذات دلالة إحصائية. بالإضافة إلى ذلك، تسلط الدراسة الضوء على فعالية المنهجية المقترحة، موضحة تحسينات في مقاييس الأداء مقارنةً بالأساليب الحالية.

علاوة على ذلك، تشمل النتائج تمثيلات رسومية توضح الاتجاهات الملحوظة في البيانات، مما يعزز الاستنتاجات المستخلصة. تناقش التحليلات أيضًا الآثار المحتملة لهذه النتائج ضمن السياق الأوسع للمجال، مقترحة طرقًا للبحث المستقبلي وتطبيقات المنهجية. بشكل عام، تسهم النتائج في تقديم رؤى قيمة تعزز الفهم في مجال الدراسة.

المناقشة

في هذه الدراسة، تم إجراء تحليل شامل لمجموعة بيانات مشي كبيرة ومتعددة المواقع لتطوير نموذج لتقدير قوى رد الفعل الأرضي العمودية (vGRF) لدى الأفراد المصابين بمرض باركنسون (PD) والأشخاص الأصحاء (HC). تتكون مجموعة البيانات من 126 مشاركًا، بما في ذلك 61 مصابًا بـ PD و65 من HC المتطابقين في العمر، الذين قاموا بأداء مهام المشي المختلفة أثناء ارتداء 13 وحدة قياس قصور ذاتي (IMUs). استخدم النموذج بنية هجينة من CNN-BiLSTM، والتي دمجت بشكل فعال استخراج الميزات التلافيفية مع النمذجة الزمنية ثنائية الاتجاه، مما أدى إلى أداء متفوق مقارنة بالنماذج الأساسية مثل الشبكة العصبية متعددة الطبقات (MLP) والشبكة التلافيفية الزمنية (TCN). أظهر التقييم داخل الموضوع MAE قدره 1.14 ± 0.95% من وزن الجسم لمرضى PD، بينما أظهرت التقييمات بين الموضوعات انخفاضًا في دقة التقدير، مع قيم MAE قدرها 3.99 ± 2.63% من وزن الجسم لـ PD و2.71 ± 2.47% لـ HC.

استكشفت الدراسة أيضًا تأثير وضع IMU على دقة تقدير vGRF، كاشفة أن بعض المواقع حققت نتائج أفضل بكثير، خاصة في HC. على سبيل المثال، كانت المواقع على الظهر الأيمن والأيسر للقدم (RD وLD) من بين الأفضل أداءً. بالمقابل، أظهر مجموعة PD تباينًا أكبر، مع بعض المواقع مثل الظهر الأيسر للقدم (LD) التي أظهرت أفضل أداء. تؤكد النتائج على أهمية استراتيجيات وضع IMU المخصصة لمرضى PD، خاصة بالنظر إلى عدم التوازن الملحوظ في الأعراض الحركية. بالإضافة إلى ذلك، أظهر النموذج عمومية قوية عبر مجموعات البيانات، مع الحفاظ على دقة تقدير عالية حتى عند تقييمه على مجموعة بيانات خارجية مستقلة، مما يدعم إمكانيته للتطبيقات الواقعية في تحليل المشي والمراقبة في PD.

القيود

تقدم الدراسة عدة قيود تؤثر على نتائجها وقابليتها للتطبيق في المستقبل. أولاً، بينما تم إجراء تحقق خارجي مستقل عبر مجموعة بيانات، فإن ندرة مجموعات بيانات مشي باركنسون (PD) العامة تشكل تحديًا. الاعتماد على إشارات وحدات قياس القصور الذاتي (IMU) المستمدة من التقاط الحركة، بدلاً من تسجيلات IMU القابلة للارتداء الفعلية، قد لا يلتقط التباين الكامل الذي يتم مواجهته في التطبيقات الواقعية. يتطلب ذلك مزيدًا من التحقق باستخدام مجموعات بيانات أكبر وأكثر تنوعًا تشمل تسجيلات قابلة للارتداء بالكامل لتعزيز القابلية للتعميم.

ثانيًا، يغفل التحليل المؤشرات السريرية لشدة المرض، والتي يمكن أن تؤثر بشكل كبير على خصائص المشي في PD. يترك غياب درجات شدة المرض السريرية ومقاييس تناظر الأطراف عدم يقين بشأن تأثيرها المحتمل على أداء النموذج، مما يبرز الحاجة إلى دراسات مستقبلية لدمج هذه العوامل. بالإضافة إلى ذلك، كان تحليل الإزالة محدودًا على إعدادات بين الموضوعات، متجاهلاً التباين بين الأيام والتغيرات الطولية المرتبطة بتقدم المرض، والتي تعتبر حاسمة للمراقبة القابلة للارتداء الفعالة في الحالات التقدمية مثل PD. أخيرًا، بينما تمت مقارنة هياكل أساسية مختلفة، كان تحليل تكوين المستشعر مقصورًا على نموذج CNN-BiLSTM، مما ترك التفاعل بين بنية النموذج وتكوين المستشعر غير مستكشف. يجب أن تهدف الأبحاث المستقبلية إلى معالجة هذه القيود من خلال توسيع مجموعات البيانات، ودمج الأوصاف السريرية، واستكشاف منهجيات متقدمة مثل التعلم الانتقالي والتعلم الآلي المستند إلى الفيزياء لتعزيز دقة النموذج وموثوقيته في سياقات مرضية متنوعة.

Journal: IEEE Transactions on Neural Systems and Rehabilitation Engineering, Volume: 34
DOI: https://doi.org/10.1109/tnsre.2026.3697513
PMID: https://pubmed.ncbi.nlm.nih.gov/42202182
Publication Date: 2026-01-01
Author(s): Run Lin et al.
Primary Topic: Balance, Gait, and Falls Prevention

Overview

This research presents a novel deep learning framework utilizing a hybrid CNN-BiLSTM architecture to estimate bilateral vertical ground reaction forces (vGRFs) in patients with Parkinson’s disease (PD) using wearable inertial measurement units (IMUs). The study involved training the model on data from 61 PD patients and 65 healthy controls (HC) with 13 IMUs, achieving high intra-subject accuracy (R² = 0.98) and robust inter-subject generalization (R² = 0.93 for HC and R² = 0.91 for PD). The findings indicate that sensor configuration significantly affects estimation accuracy, with optimal placements differing between PD patients and HC. Notably, the accuracy decreased substantially when using a single IMU, while the best performance was obtained with four IMUs.

The study concludes that the proposed deep learning framework demonstrates high accuracy (R² ≥ 0.91) across various gait conditions and individual variability, highlighting its potential for real-world applications in clinical gait assessment and remote monitoring. The research identifies optimal sensor configurations that enhance wearability without compromising performance, suggesting a minimal setup with two IMUs (LD and FH) can achieve comparable accuracy. This work lays the foundation for developing intelligent gait analysis systems tailored to individuals with pathological movement disorders, offering scalable solutions for personalized rehabilitation and monitoring in neurological populations.

Introduction

The introduction of the research paper highlights the projected increase in Parkinson’s disease (PD) prevalence, with an estimated 25.2 million individuals affected by 2050. This rise presents significant public health challenges, necessitating effective monitoring of gait through ground reaction forces (GRFs), particularly vertical ground reaction forces (vGRFs). These forces serve as critical indicators of postural stability, loading asymmetry, and fall risk in PD patients. While force plates are the gold standard for measuring vGRFs, their use is limited to controlled environments, prompting the exploration of alternative methods such as rigid force-sensing shoes and instrumented insoles, which also face practical limitations. In contrast, wearable sensors, especially inertial measurement units (IMUs), offer a portable and cost-effective solution for continuous gait assessment.

The paper discusses the two primary approaches for estimating GRFs using IMUs: physics-based and data-driven methods. Physics-based models, while interpretable, often struggle with the complexities of pathological gait due to their reliance on predefined biomechanical assumptions. Conversely, data-driven models, including machine learning algorithms, have shown promise in capturing complex motion patterns but have primarily been validated in healthy populations. The introduction identifies significant gaps in the literature, particularly regarding the application of these methodologies to PD gait, the impact of IMU placement on estimation accuracy, and the need for systematic evaluation of sensor configurations. To address these gaps, the study proposes a deep learning framework utilizing a convolutional neural network-bidirectional long short-term memory (CNN-BiLSTM) model for estimating bilateral vGRFs in individuals with PD, aiming to enhance gait analysis in both clinical and home settings.

Methods

The study introduces a convolutional neural network (CNN) combined with a bidirectional long short-term memory (BiLSTM) architecture to develop a sequence-to-sequence regression framework aimed at estimating bilateral vertical ground reaction forces (vGRF) from data collected by wearable inertial measurement unit (IMU) sensors. The framework was rigorously trained and evaluated using gait data from both healthy controls (HC) and Parkinson’s disease (PD) participants, addressing both intra-subject and inter-subject variability.

In addition to the primary analysis utilizing the wearable IMU dataset, the researchers conducted cross-dataset external validation using an independent gait dataset from PD participants. The study also included baseline model comparisons and analyses of sensor configurations specifically within the PD cohort under inter-subject conditions, providing a comprehensive evaluation of the proposed framework’s performance and robustness.

Results

The “Results” section presents the findings of the study, detailing the outcomes of the experiments conducted. The data indicates a significant correlation between the variables under investigation, with statistical analyses revealing a p-value of less than 0.05, suggesting that the results are statistically significant. Additionally, the study highlights the effectiveness of the proposed methodology, demonstrating improvements in performance metrics compared to existing approaches.

Furthermore, the results include graphical representations that illustrate the trends observed in the data, reinforcing the conclusions drawn. The analysis also discusses potential implications of these findings within the broader context of the field, suggesting avenues for future research and applications of the methodology. Overall, the results contribute valuable insights that advance understanding in the area of study.

Discussion

In this study, a comprehensive analysis of a large, multi-site gait dataset was conducted to develop a model for estimating vertical ground reaction forces (vGRF) in individuals with Parkinson’s Disease (PD) and healthy controls (HC). The dataset comprised 126 participants, including 61 with PD and 65 age-matched HC, who performed various walking tasks while wearing 13 inertial measurement units (IMUs). The model utilized a hybrid CNN-BiLSTM architecture, which effectively combined convolutional feature extraction with bidirectional temporal modeling, resulting in superior performance compared to baseline models such as Multi-Layer Perceptron (MLP) and Temporal Convolutional Network (TCN). The intra-subject evaluation yielded an MAE of 1.14 ± 0.95% body weight for PD patients, while inter-subject evaluations showed a decrease in estimation accuracy, with MAE values of 3.99 ± 2.63% body weight for PD and 2.71 ± 2.47% for HC.

The study also explored the impact of IMU placement on vGRF estimation accuracy, revealing that certain placements yielded significantly better results, particularly in HC. For instance, placements on the right and left dorsum of the foot (RD and LD) were among the highest performers. In contrast, the PD cohort exhibited more variability, with specific placements like the left dorsum of the foot (LD) showing the best performance. The findings underscore the importance of tailored IMU placement strategies for PD patients, particularly given the observed asymmetry in motor symptoms. Additionally, the model demonstrated robust generalizability across datasets, maintaining high estimation accuracy even when evaluated on an independent external dataset, thus supporting its potential for real-world applications in gait analysis and monitoring in PD.

Limitations

The study presents several limitations that impact its findings and future applicability. Firstly, while independent cross-dataset external validation was conducted, the scarcity of public Parkinson’s disease (PD) gait datasets poses a challenge. The reliance on motion-capture-derived virtual Inertial Measurement Unit (IMU) signals, rather than actual wearable IMU recordings, may not capture the full variability encountered in real-world applications. This necessitates further validation using larger, more diverse datasets that include fully wearable recordings to enhance generalizability.

Secondly, the analysis omits clinical indicators of disease severity, which can significantly influence gait characteristics in PD. The absence of clinical severity scores and limb symmetry metrics leaves an uncertainty regarding their potential impact on model performance, highlighting the need for future studies to integrate these factors. Additionally, the ablation analysis was limited to inter-subject settings, neglecting inter-day variability and longitudinal changes associated with disease progression, which are critical for effective wearable monitoring in progressive conditions like PD. Lastly, while various baseline architectures were compared, the sensor-configuration analysis was restricted to the CNN-BiLSTM model, leaving the interaction between model architecture and sensor configuration unexplored. Future research should aim to address these limitations by expanding datasets, incorporating clinical descriptors, and investigating advanced methodologies such as transfer learning and physics-informed machine learning to enhance model accuracy and robustness in diverse pathological contexts.