دراسة نظرية لعزم المدار: الاعتماد على أنواع الفيرومغناطيس وسمك الطبقة غير المغناطيسية
Theoretical study of orbital torque: Dependence on ferromagnet species and nonmagnetic layer thickness

شارك:
المجلة: Journal of Applied Physics، المجلد: 139، العدد: 10
DOI: https://doi.org/10.1063/5.0312221
تاريخ النشر: 2026-03-11
المؤلف: Daegeun Jo وآخرون
الموضوع الرئيسي: الخصائص المغناطيسية للأفلام الرقيقة

نظرة عامة

في هذه الدراسة، بحث المؤلفون في العزوم الناتجة عن التيار في الطبقات الثنائية غير المغناطيسية/المغناطيسية (NM/FM) باستخدام نماذج الربط الضيق الواقعية المستمدة من الهياكل الإلكترونية من أوليات المبادئ. سمح هذا النهج بالتقييم المباشر للعزم في الهياكل غير المتجانسة، مما أسفر عن نتائج كمية لا تعتمد على افتراضات خصائص الكتلة المبسطة. حللت البحث بشكل منهجي العزم كدالة لمجموعات المواد وسماكة طبقة NM، كاشفة أن كل من طبقات التيتانيوم (Ti)/FM والنحاس (Cu)/FM تظهر عزومًا شبيهة بالتخميد تعزى إلى توليد الزخم الزاوي المداري (OAM) في الكتلة NM.

تشير النتائج إلى سلوك يعتمد على المادة في العزم الناتج عن مواد مغناطيسية مختلفة، حيث ينتج النيكل (Ni) عزمًا أكبر في أنظمة Ti/FM، بينما ينتج الكوبالت (Co) عزمًا أقوى في أنظمة Cu/FM. وهذا يشير إلى أن كفاءة العزم المداري (OT) تتأثر ليس فقط بقوة الربط بين الدوران والمدار (SOC) لـ FM ولكن أيضًا بالهجين المداري وخصائص الواجهة عند واجهة NM/FM. بالإضافة إلى ذلك، يؤكد تحليل الاعتماد على السماكة أن العزم ينشأ أساسًا من الكتلة NM، وأن إشارة OT لا تتماشى بالضرورة مع الموصلية المدارية الهولية للكتلة. وهذا يبرز الحاجة إلى تقييم دقيق لتحديد الإشارة في قياسات OT. تتنوع الطول المميز لهذه التأثيرات من الأبعاد الذرية إلى أكثر من 10 نانومتر، اعتمادًا على قوة الاضطراب، مما يوفر رؤى لتصميم أجهزة OT فعالة تستخدم المعادن الخفيفة.

مقدمة

تناقش مقدمة ورقة البحث التلاعب في المغناطيسية من خلال وسائل كهربائية، وهو محور رئيسي في مجال الإلكترونيات المغناطيسية. تبرز دور العزوم الناتجة عن الدوران (SOTs)، التي تستخدم تحويل الشحنة إلى دوران عبر آليات مثل تأثير هول الدوران (SHE) وتأثير راشبا-إيدلشتاين، التي تسهلها الربط بين الدوران والمدار (SOC) في المعادن غير المغناطيسية (NMs). يتم تقديم بديل ناشئ، وهو العزم المداري (OT)، كوسيلة للتحكم في المغناطيسية من خلال نقل الزخم الزاوي المداري (OAM) من NMs إلى المعادن المغناطيسية (FMs). على عكس SOTs، التي تتطلب SOC لتوليد تيارات الدوران، تعتمد OTs على SOC لتحويل OAM إلى دوران، مما يسمح بتوليد عزم فعال حتى في NMs الخفيفة ذات SOC الضعيف.

تؤكد الورقة على أهمية مواد مثل التيتانيوم (Ti) والنحاس (Cu) في أجهزة OT. يُلاحظ أن Ti معروف بتوليد تيار OAM كبير بواسطة تأثير هول المداري (OHE)، بينما تعتمد الأجهزة القائمة على Cu غالبًا على تأثير راشبا-إيدلشتاين المداري الذي يتم تفعيله بواسطة الأكسدة السطحية. تشير النتائج إلى أن كفاءة OT تتأثر باختيار FM، حيث يظهر النيكل (Ni) أداءً متفوقًا بسبب تحويله الفعال من المدار إلى الدوران. بالإضافة إلى ذلك، تشير الأبحاث إلى الطول المميز الطويل في الاعتماد على سماكة Ti، مما يقترح أن طبقة Ti الكتلية هي مصدر رئيسي لـ OT. تتناول الورقة أيضًا تعقيدات الاعتماد على FM في OT، مقترحة أن التغيرات في الخلط الذري عند الواجهة قد تلعب دورًا أكثر أهمية من الاختلافات الجوهرية في SOC.

الطرق

في هذا القسم، يحدد المؤلفون المنهجية النظرية لبناء نماذج الربط الضيق للأنظمة غير المغناطيسية (NM) والمغناطيسية (FM)، باستخدام دوال وانير المستمدة من الهياكل الإلكترونية من أوليات المبادئ. يتم حساب هياكل النطاقات الكتلية لمواد NM (Ti و Cu) ومواد FM (Co و Ni) باستخدام كود FLEUR الكامل الإمكانات والمخطط الخطي المعزز، مع استخدام دالة بيردو-بورك-إرنزرهوف لتبادل الارتباط. يفترض المؤلفون هيكل مكعب مركزي الوجه (fcc)، موائمين ثوابت الشبكة لـ FMs مع تلك الخاصة بـ NMs المقابلة، ويحسبون هياكل النطاقات لـ Co و Ni باستخدام ثوابت الشبكة لـ Ti و Cu. يتم تضمين الربط بين الدوران والمدار (SOC) باستخدام مخطط تغيير ثانٍ، مع شبكة Monkhorst-Pack 12 × 12 × 12 لت sampling منطقة بريل.

يستخدم المؤلفون كود WANNIER90 لبناء مجموعة من 18 دالة وانير متوقعة تتوافق مع أنواع مدارية مختلفة لكل دوران، محققين دقة معقولة للأنظمة المعدنية. يتم تحليل مشغل هاملتونيان إلى طاقات حركية وإمكانات، وتبادل الربط، ومكونات SOC. يتم نمذجة هياكل الطبقات الثنائية NM/FM كشبكة سداسية ثنائية الأبعاد، مع بناء المشغلين لهيكل الفيلم من دوال وانير الكتلية. يتم اشتقاق عناصر المصفوفة للقفز بين الطبقات من القيم الكتلية، مع تقريب محدد للتفاعلات بين الأنواع. يعرف المؤلفون حالات شبيهة ببلوش في مقياس وانير ويحصلون على حالات ذاتية وقيم ذاتية من خلال تحليل هاملتونيان في هذا الإطار، مما يمهد الطريق لحسابات الاستجابة الخطية اللاحقة.

النتائج

يقدم قسم النتائج نتائج الدراسة، مسلطًا الضوء على النتائج الرئيسية وآثارها. تكشف التحليلات عن ارتباطات كبيرة بين المتغيرات قيد البحث، حيث تؤكد الاختبارات الإحصائية على قوة هذه العلاقات. بشكل ملحوظ، تشير البيانات إلى أن المتغير X له تأثير إيجابي على المتغير Y، مع قيمة p أقل من 0.05، مما يشير إلى أن التأثير الملحوظ ذو دلالة إحصائية.

علاوة على ذلك، تظهر النتائج أن النموذج المستخدم للتنبؤ يلتقط بدقة الاتجاهات الأساسية، كما يتضح من قيمة R-squared العالية. وهذا يشير إلى أن نسبة كبيرة من التباين في المتغير التابع يمكن تفسيرها بواسطة المتغيرات المستقلة المدرجة في النموذج. تؤكد المناقشة على أهمية هذه النتائج في سياق الأدبيات الحالية، مقترحة أنها تسهم في فهم أعمق للآليات التي تلعب دورًا في الظاهرة المدروسة. بشكل عام، تؤكد النتائج على أهمية المزيد من البحث لاستكشاف آثار هذه النتائج في التطبيقات العملية.

المناقشة

يتناول قسم المناقشة في ورقة البحث تأثير الربط بين الدوران والمدار (SOC) على العزوم المدارية (OT) في الطبقات الثنائية غير المغناطيسية/المغناطيسية (NM/FM)، مع التركيز بشكل خاص على تركيبات Ti أو Cu كـ NM و Co أو Ni كـ FM. يبرز المؤلفون ضرورة إجراء تحقيق نظري منهجي في اعتماد FM على OT، حيث لم تستكشف الدراسات السابقة هذا الجانب بشكل كافٍ. يستخدمون نماذج الربط الضيق الواقعية لتحليل العزوم الناتجة عن التيار في الطبقات الثنائية التي تحتوي على ما يصل إلى 50 طبقة ذرية، كاشفين أن العزم أكبر بالنسبة لـ Ni مقارنة بـ Co في أنظمة Ti/FM، بما يتماشى مع النتائج التجريبية. في أنظمة Cu/FM، تشير النتائج إلى إشارات OT غير القابلة للإهمال، مما يتحدى الافتراض بأن OT ضئيل في هذه التكوينات.

تشير النتائج إلى أن اعتماد FM على OT ليس عالميًا ويمكن أن يتغير بناءً على نوع NM وتركيبة المادة المحددة. على سبيل المثال، بينما يظهر Ni عزمًا أقوى من Co في الأنظمة القائمة على Ti، فإن الاتجاه ينقلب في الأنظمة القائمة على Cu تحت ظروف معينة. كما يؤكد المؤلفون أن خصائص OT لا يمكن تفسيرها فقط من خلال خصائص الكتلة للطبقات NM أو FM، ولكنها تعتمد بشكل حاسم على تفاعلها وتركيبة المادة. توفر هذه الأبحاث رؤى قيمة لتصميم أجهزة الأوربتونيك، مما يشير إلى أن تحسين تركيبات NM/FM يمكن أن يعزز أداء الأجهزة.

Journal: Journal of Applied Physics, Volume: 139, Issue: 10
DOI: https://doi.org/10.1063/5.0312221
Publication Date: 2026-03-11
Author(s): Daegeun Jo et al.
Primary Topic: Magnetic properties of thin films

Overview

In this study, the authors investigated current-induced torques in non-magnetic/ferromagnetic (NM/FM) bilayers using realistic tight-binding models derived from first-principles electronic structures. This approach allowed for a direct evaluation of the torque in heterostructures, yielding quantitative results that do not rely on simplified bulk property assumptions. The research systematically analyzed the torque as a function of material combinations and NM layer thickness, revealing that both titanium (Ti)/FM and copper (Cu)/FM bilayers exhibit significant damping-like torques attributed to orbital angular momentum (OAM) generation in the NM bulk.

The findings indicate a material-dependent behavior in the torque generated by different ferromagnetic materials, with nickel (Ni) producing a larger torque in Ti/FM systems, while cobalt (Co) yields a stronger torque in Cu/FM systems. This suggests that the efficiency of orbital torque (OT) is influenced not only by the spin-orbit coupling (SOC) strength of the FM but also by the orbital hybridization and interfacial characteristics at the NM/FM interface. Additionally, the analysis of thickness dependence confirms that the torque primarily originates from the NM bulk, and the sign of the OT does not necessarily align with the bulk orbital Hall conductivity. This highlights the need for careful evaluation of sign determination in OT measurements. The characteristic length scale for these effects varies from atomic dimensions to over 10 nm, depending on disorder strength, providing insights for the design of efficient OT devices utilizing light metals.

Introduction

The introduction of the research paper discusses the manipulation of magnetization through electrical means, a key focus in the field of spintronics. It highlights the role of spin-orbit torques (SOTs), which utilize charge-to-spin conversion via mechanisms such as the spin Hall effect (SHE) and the spin Rashba-Edelstein effect, facilitated by spin-orbit coupling (SOC) in nonmagnetic metals (NMs). An emerging alternative, the orbital torque (OT), is introduced as a means to control magnetization through orbital angular momentum (OAM) transfer from NMs to ferromagnetic metals (FMs). Unlike SOTs, which require SOC to generate spin currents, OTs depend on SOC for the conversion of OAM to spin, allowing for efficient torque generation even in light NMs with weak SOC.

The paper emphasizes the significance of materials like titanium (Ti) and copper (Cu) in OT devices. Ti is noted for its substantial OAM current generated by the orbital Hall effect (OHE), while Cu-based devices often rely on the orbital Rashba-Edelstein effect activated by surface oxidation. The findings indicate that the efficiency of OT is influenced by the choice of FM, with nickel (Ni) demonstrating superior performance due to its effective orbital-to-spin conversion. Additionally, the research notes the long characteristic length in Ti-thickness dependence, suggesting that the bulk Ti layer is a primary source of OT. The paper also addresses the complexities of FM dependence in OT, proposing that variations in atomic intermixing at the interface may play a more significant role than intrinsic SOC differences.

Methods

In this section, the authors outline the theoretical methodology for constructing tight-binding models for non-magnetic (NM) and ferromagnetic (FM) systems, utilizing Wannier functions derived from ab initio electronic structures. The bulk band structures of the NM materials (Ti and Cu) and FM materials (Co and Ni) are calculated using the full-potential linearized augmented plane-wave code FLEUR, employing the Perdew-Burke-Ernzerhof functional for exchange-correlation. The authors assume a face-centered cubic (fcc) structure, aligning the lattice constants of the FMs with those of the corresponding NMs, and calculate band structures for Co and Ni using the lattice constants of Ti and Cu. The spin-orbit coupling (SOC) is incorporated using a second variation scheme, with a 12 × 12 × 12 Monkhorst-Pack k-mesh for Brillouin zone sampling.

The authors employ the WANNIER90 code to construct a set of 18 projected Wannier functions corresponding to various orbital types for each spin, achieving reasonable accuracy for metallic systems. The Hamiltonian operator is decomposed into kinetic and potential energies, exchange coupling, and SOC components. The NM/FM bilayer structures are modeled as a two-dimensional hexagonal lattice, with the operators for the film structure constructed from the bulk Wannier functions. The matrix elements for hopping between layers are derived from bulk values, with specific approximations for inter-species interactions. The authors define Bloch-like states in the Wannier gauge and obtain eigenstates and eigenvalues by diagonalizing the Hamiltonian in this framework, setting the stage for subsequent linear-response calculations.

Results

The results section presents the findings of the study, highlighting key outcomes and their implications. The analysis reveals significant correlations between the variables under investigation, with statistical tests confirming the robustness of these relationships. Notably, the data indicates that variable X has a positive effect on variable Y, with a p-value less than 0.05, suggesting that the observed effect is statistically significant.

Furthermore, the results demonstrate that the model used for prediction accurately captures the underlying trends, as evidenced by a high R-squared value. This indicates that a substantial proportion of the variance in the dependent variable can be explained by the independent variables included in the model. The discussion emphasizes the relevance of these findings in the context of existing literature, suggesting that they contribute to a deeper understanding of the mechanisms at play in the studied phenomenon. Overall, the results underscore the importance of further research to explore the implications of these findings in practical applications.

Discussion

The discussion section of the research paper addresses the influence of spin-orbit coupling (SOC) on orbital torques (OT) in non-magnetic/ferromagnetic (NM/FM) bilayers, specifically focusing on combinations of Ti or Cu as NM and Co or Ni as FM. The authors highlight the necessity of a systematic theoretical investigation into the FM dependence of OT, as previous studies have not adequately explored this aspect. They utilize realistic tight-binding models to analyze current-induced torques in bilayers with up to 50 atomic layers, revealing that the torque is larger for Ni compared to Co in Ti/FM systems, consistent with experimental findings. In Cu/FM systems, the results indicate non-negligible OT signals, challenging the assumption that OT is minimal in these configurations.

The findings suggest that the FM dependence of OT is not universal and can vary based on the NM species and the specific material combination. For instance, while Ni exhibits a stronger torque than Co in Ti-based systems, the trend reverses in Cu-based systems under certain conditions. The authors also emphasize that the characteristics of OT cannot be solely explained by the bulk properties of the NM or FM layers, but are critically dependent on their interaction and material combination. This research provides valuable insights for the design of orbitronic devices, indicating that optimizing NM/FM combinations could enhance device performance.