DOI: https://doi.org/10.1016/j.jdent.2024.104892
PMID: https://pubmed.ncbi.nlm.nih.gov/38367825
تاريخ النشر: 2024-02-16
المؤلف: Nada El Osta وآخرون
الموضوع الرئيسي: المواد السنية والترميمات
نظرة عامة
هدفت هذه الدراسة إلى تقييم دقة الانطباعات التقليدية من البولي إيثر مقارنةً بالمسحات الرقمية من خمسة ماسحات داخل الفم (IOSs) في سياق فقدان الأسنان الجزئي في الفك العلوي لدعامات الزرع المدعومة. تم إنشاء نموذج في المختبر مع ستة زراعة، وتم الحصول على كل من الانطباعات التقليدية (باستخدام Impregum Penta Soft) والمسحات الرقمية (من Trios 3 وTrios 4 وPrimescan وCS 3600 وi-500). تم مقارنة الملفات الرقمية الناتجة مع نموذج مرجعي تم إنشاؤه بواسطة ماسح مكتبي، حيث تم تقييم الدقة من خلال انحرافات الزاوية والمسافة، بينما تم تقييم الدقة من خلال قياس تشتت القيم.
أشارت النتائج إلى أن الانطباعات التقليدية كانت لديها انحرافات متوسطة في المسافة أعلى بكثير (454.24 ± 334.70 ميكرومتر) مقارنةً بالماسحات الداخلية، التي تراوحت من 160.98 ± 204.48 ميكرومتر إلى 255.56 ± 395.89 ميكرومتر (p < 0.001). كانت انحرافات الزاوية أيضًا أعلى بالنسبة للانطباعات التقليدية (1.82 ± 1.51°) مقارنةً بالماسحات الداخلية، حيث أظهر ماسح i-500 أقل انحراف زاوي (0.97 ± 0.75°). من بين الماسحات الداخلية، أظهر Trios 3 أعلى دقة، يليه i-500 وTrios 4 وCS 3600 وPrimescan. تستنتج الدراسة أنه بينما تعتبر الانطباعات التقليدية موثوقة، فإن الماسحات الداخلية، وخاصة Trios 3 وi-500، تقدم دقة متفوقة في تصنيع الأطراف الاصطناعية المدعومة بالزرع في الأقواس الجزئية المفقودة، مما يستدعي مزيدًا من التحقق في vivo.
مقدمة
تؤكد مقدمة هذه الورقة البحثية على الدور الحاسم للتناسب السلبي في نجاح الأطراف الاصطناعية المدعومة بالزرع، والذي يعتمد بشكل كبير على تقنيات سريرية ومخبرية دقيقة، خاصةً خلال عملية أخذ الانطباع. يمكن أن تؤدي الانطباعات غير الدقيقة إلى مضاعفات كبيرة، بما في ذلك كسور المكونات وفقدان العظام الهامشية. بينما تعتبر تقنيات الانطباع التقليدية باستخدام مواد البولي إيثر أو البولي فينيل سيلاكسين معيارية، إلا أنها تخضع لعوامل مختلفة يمكن أن تؤثر على الدقة. لمواجهة هذه التحديات، ظهرت الماسحات الداخلية (IOSs) كبديل حديث، تلتقط المواقع ثلاثية الأبعاد للزرعات رقميًا. تستخدم أنظمة IOS المختلفة تقنيات التقاط متميزة، مثل التثليث والمسح المتوازي، ولكن يمكن أن تتأثر دقتها أيضًا بالعديد من المتغيرات، بما في ذلك طول السلسلة وحركة المريض.
على الرغم من التقدم في تكنولوجيا IOS، تكشف الأدبيات عن فجوة في البيانات المقارنة بشأن دقة المسحات الرقمية مقابل الانطباعات التقليدية لمواقع الزرع المتعددة في الأطراف الاصطناعية الثابتة. أشارت الدراسات السابقة إلى أن المسحات الرقمية قد تكون أقل دقة من الطرق التقليدية للأطراف الاصطناعية المدعومة بالزرع في كامل القوس، مما يؤدي إلى استمرار تفضيل التقنيات التقليدية في الترميمات طويلة السلسلة. تهدف هذه الدراسة إلى تقييم دقة وموثوقية الانطباعات التقليدية مقابل خمسة نماذج محددة من IOS – Trios 3 وTrios 4 وPrimescan وCS3600 وI-500 – في سياق فقدان الأسنان الجزئي في الفك العلوي. تفترض الفرضية الصفرية أن كلا طريقتي الانطباع ستنتجان قوالب بدقة وموثوقية متشابهة.
الطرق
تضمنت الطرق المستخدمة في هذه الدراسة في المختبر إنشاء نموذج فك علوي مع فقدان جزئي للأسنان، يتضمن ستة زراعات موضوعة بشكل استراتيجي. تم استخدام طابعة ثلاثية الأبعاد (Formlabs Form 2®) لإنشاء النموذج العامل من ملف رقمي، وتم تثبيت نظائر زراعة Euroteknika Naturactis® على النموذج. تم مسح النموذج باستخدام ماسح مكتبي 3Shape D2000 لإنتاج نموذج مرجعي رقمي. تم تقييم نوعين من الانطباعات: الانطباعات التقليدية من البولي إيثر والانطباعات الرقمية من خمسة ماسحات داخل الفم مختلفة (IOS). تم أخذ ما مجموعه 45 انطباعًا رقميًا بواسطة ثلاثة مشغلين مدربين، مع الالتزام ببروتوكول مسح موحد لضمان التناسق.
تم تقييم دقة الانطباعات بناءً على الدقة والموثوقية، وفقًا لمعايير ISO 5725-1. تم استخدام برنامج Geomagic® Control X™ لتحليل الانطباعات ثلاثية الأبعاد، باستخدام خوارزميات لمحاذاة ومقارنة النماذج الرقمية. تم حساب انحرافات المسافة والزاوية لتقييم الدقة، بينما تم استخدام الانحراف المعياري لتقييم الدقة. تم إجراء تحليلات إحصائية، بما في ذلك اختبارات ANOVA واختبارات Kruskal-Wallis، لمقارنة الانحرافات بين مجموعات الانطباع، مع تحديد مستوى دلالة عند p ≤ 0.050. حددت الدراسة أن حجم العينة المكون من تسعة لكل مجموعة كان ضروريًا لتحقيق قوة كافية لاكتشاف الفروق في الانحرافات الزاوية المتوسطة.
النتائج
تشير النتائج إلى مستوى عالٍ من التناسق بين المشغلين، مع معاملات ارتباط داخل الفئة (ICCs) تبلغ 0.84 لانحراف المسافة الخام، و0.79 لانحراف الزاوية، و0.78 لانحراف المسافة المطلقة، جميعها ضمن فترات ثقة جيدة. لم يتم العثور على اختلافات كبيرة في الانحرافات المتوسطة للمسافة والزاوية بين المشغلين (p > 0.050). ومع ذلك، أظهرت الانطباعات التقليدية انحرافًا متوسطًا أعلى بكثير في المسافة المطلقة (454.24 ± 334.70 ميكرومتر) مقارنةً بالماسحات الداخلية (IOSs)، مع اختلاف ملحوظ في انحراف المسافة الخام (p < 0.001). من بين الماسحات الداخلية، لم يتم ملاحظة اختلافات كبيرة في انحرافات المسافة المطلقة بين ماسحات CS3600 وPrimescan وTrios 4 وI500 وTrios 3 (p = 0.362). كان الانحراف الزاوي المتوسط أعلى بكثير بالنسبة للانطباعات التقليدية (1.82 ± 1.51°) مقارنةً بالماسحات الداخلية، حيث أظهر I500 وTrios 3 أقل انحرافات (0.97 ± 0.75° و1.01 ± 0.85°، على التوالي). كشفت تحليل التشتت أن Trios 3 وI500 كان لديهما أقل تشتت في المسافة (198.05 ميكرومتر و232.79 ميكرومتر، على التوالي)، مما يشير إلى دقة أعلى، بينما كانت الانطباعات التقليدية لديها أعلى تشتت (549.69 ميكرومتر). وبالمثل، بالنسبة لانحرافات الزاوية، أظهرت Trios 3 وI500 وTrios 4 أقل تشتت، بينما أظهر Primescan أعلى تشتت، مما يشير إلى دقة أقل. تم تقديم جدول مقارنة ملخص يوضح الدقة والموثوقية بين الانطباعات التقليدية وIOSs في الجدول 1.
المناقشة
في هذه المناقشة، يرفض المؤلفون الفرضية الصفرية التي تفيد بأن الانطباعات التقليدية والماسحات الرقمية تحقق دقة مماثلة للأطراف الاصطناعية المدعومة بالزرع طويلة السلسلة. تكشف الدراسة عن اختلافات كبيرة في الدقة بين الماسحات الداخلية (IOSs) والانطباعات التقليدية، خاصةً في فقدان الأسنان الجزئي في الفك العلوي. أظهرت الانطباعات التقليدية انحرافات أكبر في قياسات المسافة والزوايا، حيث حقق ماسح Trios 3 أصغر الانحرافات وأعلى دقة. كما أن I-500 قدم أداءً جيدًا، بينما أظهر Trios 4، على الرغم من كونه نموذجًا أحدث، تشتتًا أعلى في قياسات المسافة مقارنةً بـ Trios 3. بشكل عام، تشير النتائج إلى أن المسحات الرقمية، خاصةً من سلسلة Trios، تعتبر بدائل صالحة للطرق التقليدية، خاصةً للأطوال القصيرة، على الرغم من أن الانطباعات التقليدية تظل مفضلة للحالات طويلة السلسلة بسبب موثوقيتها.
يبرز المؤلفون القيود في منهجيتهم، خاصةً الاعتماد على قياسات المسافة الخطية، والتي قد لا تلتقط بشكل كافٍ التباينات ثلاثية الأبعاد والانحرافات الزاوية. يشيرون إلى أنه بينما تعتبر الماسحات المخبرية معيارًا ذهبيًا، يمكن أن تؤثر العوامل البيئية في الإعدادات السريرية على الدقة. تؤكد الدراسة على الحاجة إلى مزيد من البحث في ظل الظروف السريرية للتحقق من هذه النتائج، مشيرةً إلى أنه بينما تظهر الماسحات الداخلية مثل Trios 3 وI-500 وعدًا للأطراف الاصطناعية المدعومة بالزرع، فإن تعقيدات التطبيقات في العالم الحقيقي تستدعي مزيدًا من التحقيق.
DOI: https://doi.org/10.1016/j.jdent.2024.104892
PMID: https://pubmed.ncbi.nlm.nih.gov/38367825
Publication Date: 2024-02-16
Author(s): Nada El Osta et al.
Primary Topic: Dental materials and restorations
Overview
This study aimed to assess the accuracy of conventional polyether impressions compared to digital scans from five intra-oral scanners (IOSs) in the context of maxillary free-ended partial edentulism for long-span implant-supported prostheses. An in vitro model was created with six implants, and both conventional impressions (using Impregum Penta Soft) and digital scans (from Trios 3, Trios 4, Primescan, CS 3600, and i-500) were obtained. The resulting digital files were compared to a reference model generated by a desktop scanner, with trueness evaluated through angle and distance deviations, while precision was assessed by measuring value dispersions.
Results indicated that conventional impressions had a significantly higher mean distance deviation (454.24 ± 334.70 µm) compared to the IOSs, which ranged from 160.98 ± 204.48 µm to 255.56 ± 395.89 µm (p < 0.001). Angular deviations were also higher for conventional impressions (1.82 ± 1.51°) compared to the IOSs, with the i-500 scanner showing the lowest angular deviation (0.97 ± 0.75°). Among the IOSs, Trios 3 demonstrated the highest accuracy, followed by i-500, Trios 4, CS 3600, and Primescan. The study concludes that while conventional impressions are reliable, IOSs, particularly Trios 3 and i-500, offer superior accuracy for fabricating implant-supported prostheses in partially edentulous arches, warranting further in vivo validation.
Introduction
The introduction of this research paper emphasizes the critical role of passive fit in the success of implant-supported prostheses, which relies heavily on precise clinical and laboratory techniques, particularly during the impression-taking process. Inaccurate impressions can lead to significant complications, including component fractures and marginal bone loss. While conventional impression techniques using polyether or polyvinyl siloxane materials are standard, they are subject to various factors that can compromise accuracy. To address these challenges, intraoral scanners (IOSs) have emerged as a modern alternative, capturing the three-dimensional positions of implants digitally. Different IOS systems utilize distinct capture techniques, such as triangulation and parallel confocal scanning, but their accuracy can still be affected by numerous variables, including span length and patient movement.
Despite advancements in IOS technology, the literature reveals a gap in comparative data regarding the accuracy of digital scans versus conventional impressions for multiple implant positions in fixed prostheses. Previous studies have indicated that digital scans may be less accurate than traditional methods for full-arch implant-supported prostheses, leading to a continued preference for conventional techniques in long-span restorations. This study aims to evaluate the trueness and precision of conventional impressions against five specific IOS models—Trios 3, Trios 4, Primescan, CS3600, and I-500—within the context of maxillary free-end edentulism. The null hypothesis posits that both impression methods will produce casts of comparable trueness and precision.
Methods
The methods employed in this in vitro study involved the creation of a maxillary model with partial edentulism, incorporating six strategically placed implants. A 3D printer (Formlabs Form 2®) was utilized to generate the working model from a digital file, and Euroteknika Naturactis® implant analogs were affixed to the model. The model was scanned using a 3Shape D2000 desktop scanner to produce a digital reference model. Two types of impressions were evaluated: conventional polyether impressions and digital impressions from five different intraoral scanners (IOS). A total of 45 digital impressions were taken by three calibrated operators, adhering to a standardized scanning protocol to ensure consistency.
The accuracy of the impressions was assessed based on precision and trueness, following ISO 5725-1 standards. Geomagic® Control X™ software was employed for the analysis of 3D impressions, utilizing algorithms to align and compare the digital models. Distance and angular deviations were calculated to evaluate accuracy, while the standard deviation was used to assess precision. Statistical analyses, including ANOVA and Kruskal-Wallis tests, were performed to compare deviations among impression groups, with a significance level set at p ≤ 0.050. The study determined that a sample size of nine per group was necessary to achieve adequate power for detecting differences in mean angular deviations.
Results
The results indicate a high level of intra-operator consistency, with Intraclass Correlation Coefficients (ICCs) of 0.84 for raw distance deviation, 0.79 for angular deviation, and 0.78 for absolute distance deviation, all within good confidence intervals. No significant differences were found in mean distance and angular deviations among operators (p > 0.050). However, conventional impressions exhibited a significantly higher mean absolute distance deviation (454.24 ± 334.70 µm) compared to intraoral scanners (IOSs), with a notable difference in raw distance deviation (p < 0.001). Among the IOSs, no significant differences were observed in absolute distance deviations among the CS3600, Primescan, Trios 4, I500, and Trios 3 scanners (p = 0.362). The mean angular deviation was significantly higher for conventional impressions (1.82 ± 1.51°) compared to IOSs, with the I500 and Trios 3 showing the lowest deviations (0.97 ± 0.75° and 1.01 ± 0.85°, respectively). Dispersion analysis revealed that Trios 3 and I500 had the lowest distance dispersion (198.05 µm and 232.79 µm, respectively), indicating higher precision, while conventional impressions had the highest dispersion (549.69 µm). Similarly, for angular deviations, Trios 3, I500, and Trios 4 demonstrated the least dispersion, whereas the Primescan exhibited the highest dispersion, indicating lower precision. A summary comparison table detailing the trueness and precision between conventional impressions and IOSs is provided in Table 1.
Discussion
In this discussion, the authors reject the null hypothesis that conventional impressions and digital scanners yield similar accuracy for long-span implant-supported prostheses. The study reveals significant variations in accuracy between intraoral scanners (IOSs) and conventional impressions, particularly in maxillary free-ended partial edentulism. Conventional impressions demonstrated larger deviations in both distance and angle measurements, with the Trios 3 scanner achieving the smallest deviations and highest accuracy. The I-500 also performed well, while Trios 4, despite being a newer model, exhibited higher dispersion in distance measurements compared to Trios 3. Overall, the findings indicate that digital scans, especially from the Trios series, serve as valid alternatives to conventional methods, particularly for shorter spans, although conventional impressions remain preferable for long-span cases due to their reliability.
The authors highlight limitations in their methodology, particularly the reliance on linear distance measurements, which may not adequately capture three-dimensional discrepancies and angular misalignments. They note that while laboratory scanners are considered the gold standard, environmental factors in clinical settings can affect accuracy. The study emphasizes the need for further research under clinical conditions to validate these findings, suggesting that while IOSs like Trios 3 and I-500 show promise for implant-supported prostheses, the complexities of real-world applications warrant additional investigation.
