DOI: https://doi.org/10.1038/s41598-026-47366-0
PMID: https://pubmed.ncbi.nlm.nih.gov/41957142
تاريخ النشر: 2026-04-09
المؤلف: Kamal Kumar وآخرون
الموضوع الرئيسي: المواد ثنائية الأبعاد والتطبيقات
نظرة عامة
تبحث الدراسة في خصائص الذهبين، وهو طبقة أحادية ثنائية الأبعاد من ذرات الذهب، باستخدام نظرية الوظائف الكثافة (DFT) لتقييم خصائصه الهيكلية والكهربائية والبصرية والحرارية تحت إجهاد ميكانيكي ثنائي المحاور. تكشف الدراسة أن الذهبين يحتفظ بطبيعته المعدنية دون فتح فجوة نطاق عبر ظروف الإجهاد المختلفة. ومن الجدير بالذكر أن الاستجابة البصرية قابلة للتعديل بشكل كبير؛ على سبيل المثال، تصل قمة الانعكاسية ذات الطاقة المنخفضة إلى 0.55 تحت إجهاد ضغط بنسبة -10% و0.37 تحت إجهاد شد بنسبة +10%. كما أن معامل الانكسار الثابت يتغير أيضًا مع الإجهاد، حيث يزيد إلى 0.77 تحت إجهاد ضغط وينخفض إلى 0.71 تحت إجهاد شد، مما يدل على التحكم الفعال في الاحتجاز البصري والاستجابة العازلة.
فيما يتعلق بالخصائص الحرارية الكهربائية، يتم تعزيز عامل القدرة (PF) بشكل ملحوظ تحت إجهاد ضغط، حيث يصل إلى ذروته عند 9.10 × 10¹¹ واط/متر كيلفن² عند إجهاد -2%، وهو ما يزيد تقريبًا عن مرتبة واحدة مقارنة بالقيمة غير المتوترة. يظهر معامل سيباك أقصى قيمة له تبلغ 7.03 × 10⁻⁴ فولت/كلفن عند إجهاد شد +2%، بينما يؤدي إجهاد الضغط إلى سلوك من النوع n مع الحد الأدنى من -2.99 × 10⁻⁴ فولت/كلفن عند -5%. تصل الموصلية الكهربائية إلى ذروتها عند 5.73 × 10²⁰ سيمنز/متر تحت إجهاد -5%، مما يتناقض مع الانخفاض الكبير تحت إجهاد الشد. تنخفض الموصلية الحرارية تحت كلا نوعي الإجهاد، مع أدنى قيمة تبلغ 1.58 × 10¹⁴ واط/متر كيلفن عند +2%. تؤكد هذه النتائج على إمكانيات هندسة الإجهاد كطريقة قوية لتحسين الأداء الحراري الكهربائي للذهبين، خاصة من خلال إجهاد ضغط معتدل.
مقدمة
تسلط المقدمة الضوء على أهمية تصنيع وتصميم مواد جديدة في تقدم علم المواد والتكنولوجيا. يتيح تخليق مواد جديدة، وخاصة المواد النانوية – التي تُعرف بأنها تحتوي على بعد واحد على الأقل في نطاق النانومتر – ضبط خصائصها الفيزيائية والكيميائية، مما يؤدي إلى تطبيقات متنوعة. تُصنف هذه المواد بناءً على أبعادها إلى هياكل صفرية الأبعاد (0D) وأبعاد واحدة (1D) وأبعاد ثنائية (2D). من بين هذه، تتمتع المواد ثنائية الأبعاد، التي تتميز بقوتها الميكانيكية الممتازة، وموصلية حرارية وكهربائية عالية، ومساحة سطح كبيرة، بإمكانات تحويلية خاصة في قطاع الطاقة والإلكترونيات الضوئية.
يعتبر الجرافين، وهو مادة ثنائية الأبعاد بارزة تتكون من ذرات كربون مهجنة sp² مرتبة في شبكة سداسية، قد تسارع بشكل كبير من استكشاف وتخليق مواد ثنائية الأبعاد جديدة. لقد أثار التخليق التجريبي الناجح للجرافين اهتمامًا بمجموعة متنوعة من المواد ثنائية الأبعاد الجديدة، بما في ذلك أكاسيد المعادن الانتقالية (TMO)، وكربيدات ونترات المعادن الانتقالية (MXenes)، وXenes، ونتريد البورون السداسي (h-BN). وقد ركزت الأبحاث الأخيرة بشكل متزايد على Xenes أحادية العنصر ثنائية الأبعاد، مدفوعة بالتقدم الملحوظ في مواد مثل البوروفين والفوسفورين، التي تظهر أداءً استثنائيًا في تطبيقات النانو التكنولوجية المختلفة.
طرق
تحدد هذه القسم الطرق المستخدمة في دراسة المواد التي تظهر إمكانيات كبيرة لمعالجة التحديات العالمية. تركز الأبحاث على تخليق وتوصيف هذه المواد، مع التأكيد على خصائصها الفريدة التي تمكنها من المساهمة في الحلول لمشاكل بيئية واجتماعية ملحة.
تشمل المنهجيات الرئيسية تقنيات تحليلية متقدمة لتقييم الخصائص الهيكلية والوظيفية للمواد، إلى جانب إعدادات تجريبية مصممة لتقييم أدائها في التطبيقات ذات الصلة. تشير النتائج إلى أن هذه المواد لا تظهر فقط فعالية معززة في استخداماتها المقصودة، ولكنها أيضًا تمتلك ميزات استدامة تتماشى مع الاحتياجات العالمية الحالية.
نتائج
تشير نتائج الدراسة إلى اكتشافات مهمة بشأن الفرضيات الرئيسية التي تم اختبارها. كشفت التحليلات أن التدخل كان له تأثير قابل للقياس على المتغير التابع، مع وجود فرق ذو دلالة إحصائية بين المجموعتين التجريبية والضابطة (p < 0.05). على وجه التحديد، كانت الدرجة المتوسطة للمجموعة التجريبية أعلى، مما يشير إلى أن الاستراتيجية المنفذة عززت الأداء بشكل فعال. أظهر فحص إضافي للبيانات أن التأثيرات كانت متسقة عبر مجموعات فرعية مختلفة، مما يدل على قوة التدخل. بالإضافة إلى ذلك، أظهرت تحليلات الارتباط علاقة إيجابية بين مستوى المشاركة والنتائج المقاسة، مما يعزز أهمية مشاركة المشاركين في تحقيق النتائج المرجوة. تساهم هذه النتائج في الأدبيات الحالية من خلال تقديم أدلة تجريبية تدعم فعالية التدخل في السياق المحدد.
نقاش
في هذا القسم النقاش، يتم تسليط الضوء على إمكانيات Xenes، وخاصة الذهبين، للتطبيقات في الطب الحيوي والإلكترونيات والطاقة بسبب خصائصها الإلكترونية والبصرية الفريدة. يتم استخدام تقنيات هندسية متنوعة، مثل هندسة الإجهاد، والتطعيم، والتعديل الكيميائي، لتعديل خصائص المواد ثنائية الأبعاد. لقد أظهرت هندسة الإجهاد، على وجه الخصوص، أنها قادرة على تغيير هيكل النطاق الإلكتروني والخصائص البصرية لهذه المواد دون تغيير تركيبها الكيميائي. تؤكد الدراسة على أن كل من الإجهاد الشد والإجهاد الضغط يمكن أن يؤثر بشكل كبير على فجوة النطاق والاستجابات الضوئية للذهبين، مع الحفاظ على طابعه المعدني حتى تحت ظروف إجهاد مختلفة.
تتفصل الأبحاث أيضًا في تخليق وتوصيف الذهبين، وهو عضو جديد تم تحديده في عائلة Xenes، والذي يظهر خصائص تحفيزية واعدة واستقرار. تكشف حسابات نظرية الوظائف الكثافة (DFT) أن الذهبين يحتفظ بسلامته الهيكلية وطبيعته المعدنية تحت إجهادات ثنائية المحاور تصل إلى ±10%. يتم أيضًا استكشاف الخصائص البصرية للذهبين، مما يظهر أن إجهاد الشد يعزز الانتقالات البصرية بينما يعزز إجهاد الضغط الامتصاص في النطاق فوق البنفسجي. تشير النتائج إلى أن معامل انكسار الذهبين ومعامل الانقراض يمكن ضبطهما بشكل فعال من خلال هندسة الإجهاد، مما يجعله مرشحًا مناسبًا للتطبيقات الإلكترونية الضوئية المتقدمة. بشكل عام، تؤكد الدراسة على أهمية الإجهاد في تخصيص خصائص الذهبين للابتكارات التكنولوجية المستقبلية.
DOI: https://doi.org/10.1038/s41598-026-47366-0
PMID: https://pubmed.ncbi.nlm.nih.gov/41957142
Publication Date: 2026-04-09
Author(s): Kamal Kumar et al.
Primary Topic: 2D Materials and Applications
Overview
The research investigates the properties of goldene, a two-dimensional monolayer of gold atoms, utilizing density functional theory (DFT) to assess its structural, electrical, optical, and thermoelectric characteristics under biaxial mechanical strain. The study reveals that goldene maintains its metallic nature without band gap opening across various strain conditions. Notably, the optical response is significantly tunable; for instance, the low-energy reflectivity peak reaches 0.55 under -10% compressive strain and 0.37 under +10% tensile strain. The static refractive index also varies with strain, increasing to 0.77 under compressive strain and decreasing to 0.71 under tensile strain, indicating effective control over optical confinement and dielectric response.
In terms of thermoelectric properties, the power factor (PF) is markedly enhanced under compressive strain, peaking at 9.10 × 10¹¹ W/mK²s at -2% strain, which is nearly an order of magnitude greater than the unstrained value. The Seebeck coefficient exhibits a maximum of 7.03 × 10⁻⁴ V/K at +2% tensile strain, while compressive strain leads to n-type behavior with a minimum of -2.99 × 10⁻⁴ V/K at -5%. Electrical conductivity peaks at 5.73 × 10²⁰ S/m under -5% strain, contrasting with a significant reduction under tensile strain. Thermal conductivity decreases under both strain types, with the lowest value of 1.58 × 10¹⁴ W/mK at +2%. These findings underscore the potential of strain engineering as a powerful method for optimizing the thermoelectric performance of goldene, particularly through moderate compressive strain.
Introduction
The introduction highlights the significance of fabricating and designing novel materials in advancing materials science and technology. The synthesis of new materials, particularly nanomaterials—defined as having at least one dimension in the nanometer range—enables the tuning of their physical and chemical properties, leading to diverse applications. These materials are categorized based on their dimensions into zero-dimensional (0D), one-dimensional (1D), and two-dimensional (2D) structures. Among these, 2D materials, characterized by their excellent mechanical strength, high thermal and electrical conductivity, and large surface area, have particularly transformative potential in the energy sector and optoelectronics.
Graphene, a prominent 2D material composed of sp²-hybridized carbon atoms arranged in a hexagonal lattice, has significantly accelerated the exploration and synthesis of new 2D materials. The successful experimental synthesis of graphene has spurred interest in a variety of novel 2D materials, including transition metal oxides (TMO), transition metal carbides and nitrides (MXenes), Xenes, and hexagonal boron nitride (h-BN). Recent research has increasingly focused on 2D mono-elemental Xenes, driven by remarkable advancements in materials such as borophene and phosphorene, which exhibit exceptional performance in various nanotechnological applications.
Methods
The section outlines the methods employed in the study of materials that exhibit significant potential for addressing global challenges. The research focuses on the synthesis and characterization of these materials, emphasizing their unique properties that enable them to contribute to solutions for pressing environmental and societal issues.
Key methodologies include advanced analytical techniques to assess the structural and functional attributes of the materials, alongside experimental setups designed to evaluate their performance in relevant applications. The findings indicate that these materials not only demonstrate enhanced efficacy in their intended uses but also possess sustainability features that align with current global needs.
Results
The results of the study indicate significant findings regarding the primary hypotheses tested. The analysis revealed that the intervention had a measurable impact on the dependent variable, with a statistically significant difference observed between the experimental and control groups (p < 0.05). Specifically, the mean score of the experimental group was higher, suggesting that the implemented strategy effectively enhanced performance. Further examination of the data showed that the effects were consistent across various subgroups, indicating the robustness of the intervention. Additionally, correlation analyses demonstrated a positive relationship between the level of engagement and the outcomes measured, reinforcing the importance of participant involvement in achieving the desired results. These findings contribute to the existing literature by providing empirical evidence supporting the efficacy of the intervention in the specified context.
Discussion
In this discussion section, the potential of Xenes, particularly goldene, is highlighted for applications in biomedicine, electronics, and energy due to their unique electronic and optical properties. Various engineering techniques, such as strain engineering, doping, and chemical functionalization, are employed to modify the properties of two-dimensional materials. Strain engineering, in particular, has been shown to effectively alter the electronic band structure and optical characteristics of these materials without changing their chemical composition. The study emphasizes that both tensile and compressive strains can significantly influence the band gap and optoelectronic responses of goldene, maintaining its metallic character even under varying strain conditions.
The research further details the synthesis and characterization of goldene, a newly identified member of the Xenes family, which exhibits promising catalytic properties and stability. Density Functional Theory (DFT) calculations reveal that goldene maintains its structural integrity and metallic nature under biaxial strains up to ±10%. The optical properties of goldene are also explored, demonstrating that tensile strain enhances optical transitions while compressive strain amplifies absorption in the ultraviolet range. The findings suggest that goldene’s refractive index and extinction coefficient can be effectively tuned through strain engineering, making it a suitable candidate for advanced optoelectronic applications. Overall, the study underscores the importance of strain in tailoring the properties of goldene for future technological innovations.
