DOI: https://doi.org/10.1038/s41598-026-59606-4
PMID: https://pubmed.ncbi.nlm.nih.gov/42386886
تاريخ النشر: 2026-07-01
المؤلف: Mehmet Akif Yerlikaya وآخرون
الموضوع الرئيسي: اتخاذ القرار متعدد المعايير
نظرة عامة
تقدم ورقة البحث طريقة تصنيف التوازن المرحلي (PEOM)، وهي إطار هجين مصمم لصنع القرار متعدد المعايير (MCDM) يدمج بشكل فعال بين القيود غير التعويضية والتبادلات التعويضية. على عكس طرق MCDM التقليدية التي قد تتجاهل المتطلبات الحرجة، تستخدم PEOM عتبات ذات تذبذب لتحديد مناطق الإزالة الصارمة ومناطق العقوبات التدريجية. تتميز بهيكل عملية AND/OR لتمييز بين المعايير غير التعويضية والتعويضية، وتستخدم تعديلات الوزن القائمة على الانكماش لمعالجة المؤشرات المرتبطة، وتطبق آلية تصنيف صافي التدفق لضمان تصنيفات مستقرة وقابلة للتفسير. يتم التحقق من صحة الإطار من خلال دراستين حالة للطاقة: اختيار مواقع توربينات الرياح وإمداد الهيدروجين لخلايا الوقود PEM، مما يظهر قدرتها على القضاء على الخيارات غير القابلة للتطبيق مبكرًا والحفاظ على تصنيفات قوية تتماشى مع الحدس الهندسي.
يكشف تحليل الحساسية أن PEOM تظهر مقاومة قوية للتغيرات في إعدادات المعلمات، حيث تحتفظ البدائل السائدة بتصنيفاتها تحت تحولات الوزن الواقعية. تؤثر المعلمات الرئيسية، مثل عتبات القابلية ودرجة انحناء الحزام، بشكل كبير على سلوك النموذج، مما يؤثر على عملية الفرز وشدة العقوبات للبدائل الحدودية. تؤكد الدراسة أنه بينما توفر PEOM نهجًا منظمًا لصنع القرار يأخذ في الاعتبار القابلية والترابط، إلا أن لديها أيضًا قيودًا، بما في ذلك الحساسية لتعريفات العتبات والمتطلبات الحسابية لمجموعات البدائل الكبيرة. تشمل اتجاهات البحث المستقبلية التحقق من صحة PEOM عبر مجموعات بيانات متنوعة ودمج تقنيات متقدمة مثل الذكاء الاصطناعي وإنترنت الأشياء لتعزيز قابليتها للتكيف وقدرات صنع القرار في الوقت الحقيقي. بشكل عام، تمثل PEOM إطارًا واعدًا لمعالجة مشاكل القرار المعقدة حيث تكون كل من القيود والتبادلات حاسمة.
مقدمة
تقدم مقدمة ورقة البحث إطار تجميع AND/OR الهجين، كما هو محدد بواسطة المعادلات (6-8). يدمج هذا الإطار المنطق غير التعويضي (AND) والتعويضي (OR) في استجابة مركبة موحدة، مما يعزز المرونة في البيئات التي تتميز بالقيود الصارمة ومتطلبات الأداء. على عكس النماذج التقليدية التي تعالج هذه المنطق بشكل منفصل، تدمج PEOM (نموذج التقييم والتخطيط التوجيهي) بشكل فعال بينهما لتمثيل تعقيدات هياكل صنع القرار في العالم الحقيقي بشكل أفضل. يهدف هذا النهج المبتكر إلى تحسين دقة وقابلية تطبيق نماذج القرار في مجالات متنوعة.
طرق
تناقش هذه القسم قيود طرق صنع القرار الحالية، وخاصة الأساليب المعتمدة على المسافة مثل TOPSIS و VIKOR. هذه الطرق، على الرغم من بساطتها الحسابية، هي تعويضية بالكامل، مما يسمح للأداء القوي في معيار واحد بتعويض الأداء الضعيف في معيار آخر. يمكن أن تؤدي هذه الخاصية إلى نتائج غير واقعية في سياقات حرجة تتعلق بالسلامة أو مقيدة بالتنظيم حيث يجب تلبية معايير معينة بشكل صارم.
بالمقابل، تتضمن طرق التصنيف مثل ELECTRE و PROMETHEE منطق الفيتو والمصداقية الزوجية لمعالجة هذه القضايا. ومع ذلك، تعاني من إعدادات عتبات مفاجئة، مما يجعلها حساسة لتأثيرات الحدود وضوضاء البيانات. بالإضافة إلى ذلك، غالبًا ما تتجاهل كل من الطرق المعتمدة على المسافة وطرق التصنيف مشكلة التكرار الناتج عن الترابط أثناء عملية الوزن، مما قد يؤدي إلى احتساب زائد للمؤشرات المماثلة. يبرز هذا فجوة نظرية كبيرة في المنهجيات الحالية المستخدمة في صنع القرار في السيناريوهات المعقدة.
نقاش
يقدم إطار PEOM (طريقة تصنيف التوازن المرحلي) نهجًا جديدًا لصنع القرار متعدد المعايير (MCDM) من خلال دمج أربعة مكونات رئيسية تهدف إلى تعزيز قوة القرار، وقابلية التفسير، ووعي القابلية. أولاً، يستخدم عتبات ذات تذبذب لنمذجة الانتقالات التدريجية حول حدود القابلية الحرجة، مما يمنع التغييرات المفاجئة في التصنيفات بسبب التغيرات الطفيفة بالقرب من هذه العتبات. ثانيًا، يميز الإطار بين المعايير غير التعويضية (AND-block) والتعويضية (OR-block)، مما يضمن تلبية المتطلبات الأساسية مثل السلامة والامتثال التنظيمي قبل النظر في التبادلات المتعلقة بالأداء. ثالثًا، يتم تقديم آلية تعديل الوزن الواعية بالترابط للتخفيف من تأثير العد المزدوج الناتج عن المعايير المرتبطة، مما يعزز موثوقية عملية صنع القرار. أخيرًا، يتم استخدام آلية تصنيف صافي التدفق لتوليد تصنيفات مستقرة وقابلة للتفسير بناءً على علاقات الهيمنة الزوجية.
يتم توضيح قابلية تطبيق إطار PEOM من خلال دراستين حالة هندسية: اختيار موقع توربينات الرياح وتقييم مسار الهيدروجين لأنظمة خلايا الوقود PEM. توضح هذه الحالات كيف توازن PEOM بشكل فعال بين متطلبات القابلية الصارمة والتقييمات الموجهة نحو الأداء، مما يظهر مزاياها على طرق MCDM التعويضية التقليدية. من خلال معالجة العيوب الشائعة مثل عمى العتبات وعدم استقرار التصنيفات، تقدم PEOM بنية قرار شاملة تأخذ في الاعتبار القيود وتكون مقاومة للترابط، مما يجعلها مناسبة بشكل خاص لسيناريوهات صنع القرار الهندسي والبيئي المعقدة. تتناول الأقسام التالية من الورقة الهيكل الرياضي لإطار PEOM، وموقعه ضمن الأدبيات الأوسع لـ MCDM، ونتائج دراسات الحالة، جنبًا إلى جنب مع تحليلات الحساسية وجهود التحقق.
DOI: https://doi.org/10.1038/s41598-026-59606-4
PMID: https://pubmed.ncbi.nlm.nih.gov/42386886
Publication Date: 2026-07-01
Author(s): Mehmet Akif Yerlikaya et al.
Primary Topic: Multi-Criteria Decision Making
Overview
The research paper introduces the Phase-Equilibrium Outranking Method (PEOM), a hybrid framework designed for Multi-Criteria Decision Making (MCDM) that effectively integrates both non-compensatory constraints and compensatory trade-offs. Unlike traditional MCDM methods that may overlook critical requirements, PEOM employs hysteresis-banded thresholds to delineate strict elimination zones and gradual penalty regions. It features an AND/OR process structure to distinguish between non-compensatory and compensatory criteria, utilizes shrinkage-based weight adjustments to address correlated indicators, and implements a net-flow outranking mechanism to ensure stable and interpretable rankings. The framework is validated through two energy case studies: wind turbine siting and PEM fuel cell hydrogen supply, demonstrating its capability to eliminate infeasible options early and maintain robust rankings aligned with engineering intuition.
The sensitivity analysis reveals that PEOM exhibits strong resilience to changes in parameter settings, with dominant alternatives retaining their rankings under realistic weight shifts. Key parameters, such as feasibility thresholds and band curvature, significantly influence the model’s behavior, affecting the screening process and the severity of penalties for borderline alternatives. The study emphasizes that while PEOM provides a structured approach to decision-making that accounts for feasibility and correlation, it also has limitations, including sensitivity to threshold definitions and computational demands for large alternative sets. Future research directions include validating PEOM across diverse datasets and integrating advanced technologies like AI and IoT to enhance its adaptability and real-time decision-making capabilities. Overall, PEOM represents a promising framework for addressing complex decision problems where both constraints and trade-offs are critical.
Introduction
The introduction of the research paper presents the Hybrid AND/OR Aggregation framework, as defined by equations (6-8). This framework integrates non-compensatory (AND) and compensatory (OR) logic into a unified composite response, thereby enhancing flexibility in environments characterized by stringent constraints and performance demands. Unlike traditional models that address these logics in isolation, the PEOM (Prescriptive Evaluation and Optimization Model) effectively merges them to better represent the complexities of real-world decision-making hierarchies. This innovative approach aims to improve the accuracy and applicability of decision models in various domains.
Methods
The section discusses the limitations of existing decision-making methods, particularly distance-based approaches such as TOPSIS and VIKOR. These methods, while computationally straightforward, are fully compensatory, allowing strong performance in one criterion to offset poor performance in another. This characteristic can result in unrealistic outcomes in safety-critical or regulation-bound contexts where certain criteria must be strictly met.
In contrast, outranking methods like ELECTRE and PROMETHEE incorporate veto logic and pairwise credibility to address these issues. However, they suffer from abrupt threshold settings, making them sensitive to boundary effects and data noise. Additionally, both distance-based and outranking methods often neglect the problem of correlation-induced redundancy during the weighting process, which can lead to the overcounting of similar indicators. This highlights a significant theoretical gap in the current methodologies used for decision-making in complex scenarios.
Discussion
The PEOM (Phase Equilibrium Outranking Method) framework presents a novel approach to multi-criteria decision-making (MCDM) by integrating four key components aimed at enhancing decision robustness, interpretability, and feasibility awareness. Firstly, it employs hysteresis-banded thresholds to model gradual transitions around critical feasibility limits, thereby preventing abrupt changes in rankings due to minor variations near these thresholds. Secondly, the framework distinguishes between non-compensatory (AND-block) and compensatory (OR-block) criteria, ensuring that essential requirements such as safety and regulatory compliance are met before performance trade-offs are considered. Thirdly, a correlation-aware weight adjustment mechanism is introduced to mitigate the double-counting effect from correlated criteria, enhancing the reliability of the decision-making process. Lastly, a net-flow outranking mechanism is utilized to generate stable and interpretable rankings based on pairwise dominance relations.
The applicability of the PEOM framework is demonstrated through two engineering case studies: wind turbine site selection and hydrogen pathway assessment for PEM fuel cell systems. These cases illustrate how PEOM effectively balances strict feasibility requirements with performance-oriented evaluations, showcasing its advantages over conventional compensatory MCDM methods. By addressing common deficiencies such as threshold blindness and ranking instability, PEOM offers a comprehensive decision architecture that is both constraint-aware and correlation-resilient, making it particularly suitable for complex engineering and environmental decision-making scenarios. The subsequent sections of the paper detail the mathematical structure of the PEOM framework, its positioning within the broader MCDM literature, and the results of the case studies, along with sensitivity analyses and validation efforts.
