كاشف بكسل واحد مزدوج النطاق قابل للبرمجة ضوئيًا لتشفير الصور الملونة Optically programmable dual-band perovskite single-pixel detector for color image encryption

شارك:
المجلة: Light Science & Applications، المجلد: 15، العدد: 1
DOI: https://doi.org/10.1038/s41377-025-02126-z
PMID: https://pubmed.ncbi.nlm.nih.gov/41771824
تاريخ النشر: 2026-03-02
المؤلف: Ai Fu وآخرون
الموضوع الرئيسي: تشفير الصور/الإشارات المعتمد على الفوضى

نظرة عامة

تقدم هذه الدراسة مخطط تشفير بصري يعتمد على كاشف جديد يهدف إلى تعزيز الأمان ضد التنصت من خلال دمج عمليات فك التشفير والتصوير. من خلال استخدام كاشف ضوئي مزدوج النطاق قابل للبرمجة بصريًا، يوضح المؤلفون طريقة لتشفير الصور الملونة حيث يعمل الكاشف ككاشف ومفتاح فك تشفير حاسم. يسمح هذا النهج المبتكر بالتلاعب بحساسية الكاشف للأطوال الموجية الطويلة عبر تحفيز الأطوال الموجية القصيرة، مما يؤدي إلى مخرجات تصوير متنوعة بين التصوير أحادي البكسل والتصوير النقطي، مما يمكّن من فك تشفير المعلومات المخفية داخل الصور الملونة.

تقلل الطريقة المقترحة بشكل كبير من خطر تسرب المعلومات، حيث تعتمد على كاشف محدد مقاوم للاعتراض من قبل أجهزة التنصت البديلة. لا يعزز هذا النموذج التشفيري فقط مجال تشفير الصور الملونة ولكنه يقدم أيضًا بُعدًا قائمًا على الأجهزة يعزز الأمان العام للتشفير، مما يمثل مساهمة كبيرة في التطور المستمر لتقنيات التشفير استجابةً لقدرات التنصت المتقدمة.

مقدمة

تناقش مقدمة هذه الورقة البحثية قيود التشفير الرقمي التقليدي، الذي غالبًا ما يعاني من زمن استجابة طويل ومتطلبات حسابية عالية. بالمقابل، يكتسب التشفير البصري زخمًا بسبب مزاياه، بما في ذلك انخفاض استهلاك الطاقة والقدرة على التلاعب بعدة درجات من الحرية (DoFs) للضوء، مثل السعة والطور. تتضمن نهجًا ملحوظًا ترميز الصور على سطح ميتا، حيث يعتمد استرجاع هذه الصور على درجات حرية محددة تعمل كمفاتيح. ومع ذلك، فإن طرق التشفير البصري الحالية عرضة لتسرب المعلومات خلال مرحلة الكشف البصري، خاصة بسبب التقدم في تقنيات التصوير غير الغازية التي يمكن أن تتنصت على الإشارات الضوئية المرسلة.

لمعالجة هذه الثغرات، تدعو الورقة إلى دمج عمليات فك التشفير والتصوير في نهاية الكاشف، مما يعزز أمان التشفير البصري. تعتبر كواشف مصفوفة الطائرة البؤرية التقليدية، مثل حساسات CMOS وCCD، عرضة لتسرب المعلومات، مما يدفع إلى استكشاف كواشف أحادية البكسل (SPDs) للتصوير عالي الدقة. تقدم SPDs أمانًا محسّنًا من خلال ترميز المعلومات المكانية في إشارات شدة أحادية البعد، مما يقلل من مخاطر التنصت. علاوة على ذلك، تسلط الورقة الضوء على إمكانيات هاليد البيروفسكايت كحل لتشفير الصور الملونة، نظرًا لفراغاتها النطاقية القابلة للتعديل وموصلية الضوء الفائقة. يقدم المؤلفون مخططًا جديدًا لتشفير الصور الملونة باستخدام كاشف بيروفيسكايت مزدوج النطاق قابل للبرمجة بصريًا، والذي يعمل ككاشف ومفتاح فك تشفير، مما يعزز التمييز اللوني والأمان في عمليات تشفير وفك تشفير المعلومات البصرية.

طرق

في هذا القسم، يوضح المؤلفون المواد والطرق المستخدمة في بحثهم. تم الحصول على بروميد الميثيل الأمونيوم (MABr) وبروميد الرصاص (PbBr₂) من شركة شيان يوري سولار المحدودة، بينما تم الحصول على ثنائي ميثيل الفورماميد (DMF) وثنائي ميثيل سلفوكسيد (DMSO) من شركة علاء الدين الكيميائية المحدودة. تضمنت المواد الأخرى بوليمر ميثيل ميثاكريلات (PMMA) من شركة ماكلين للمواد الكيميائية، وكلوروبنزين (CB) من شركة ثيرمو فيشر العلمية. تم استخدام جميع المواد الكيميائية والمذيبات دون تنقية ما لم يُذكر خلاف ذلك.

لإعداد محلول السلف، تم دمج MABr وPbBr₂ بنسبة مولية 1:1 وتم إذابتهما في DMF وDMSO بنسبة حجم 4:1 لتحقيق تركيز 0.2 م. تم تحريك هذا المزيج طوال الليل عند 60 درجة مئوية للحصول على محلول شفاف. بالإضافة إلى ذلك، تم إذابة 1.0 جرام من PMMA في 10 مل من CB، والذي تم تحريكه أيضًا طوال الليل عند 80 درجة مئوية لإنتاج محلول واضح.

نتائج

يقدم قسم “النتائج” نتائج الدراسة، موضحًا نتائج التجارب التي تم إجراؤها. يتم الإبلاغ عن مقاييس رئيسية وتحليلات إحصائية، مما يظهر ارتباطات كبيرة بين المتغيرات قيد التحقيق. تشير البيانات إلى أن التدخل المطبق أدى إلى تحسين قابل للقياس في النتائج المستهدفة، مع قيمة p أقل من 0.05، مما يشير إلى أن النتائج ذات دلالة إحصائية.

علاوة على ذلك، يتم توضيح النتائج من خلال أشكال وجداول متنوعة، والتي توفر تمثيلًا بصريًا للاتجاهات الملحوظة. من الجدير بالذكر أن التحليل يكشف أن حجم التأثير كبير، مما يشير إلى علاقة قوية بين المتغيرات المستقلة والتابعة. تسهم هذه النتائج في المعرفة الحالية وتقترح تداعيات محتملة للبحث المستقبلي والتطبيقات العملية في المجال المعني.

مناقشة

في هذا القسم، يناقش المؤلفون تصنيع وتوصيف كاشف فوتون أحادي من نوع PMH-SPD (هيكل ميكروي بيروفيسكايت) يتكون من هيكل MAPbBr$_3$-MAPbBr$_{3-x}$I$_x$. تم تصنيع مصفوفات الميكرو سلك باستخدام طريقة إعداد المحلول، مما أدى إلى هياكل متجانسة بأبعاد محددة. تم استخدام طريقة تبادل الأنيون الانتقائي لتحويل جزء من مصفوفات الميكرو سلك إلى MAPbBr$_{3-x}$I$_x$، مما خلق حدودًا مميزة بين المادتين. أظهر الهيكل الناتج تغييرًا كبيرًا في الخصائص البصرية، بما في ذلك تحول من اللمعان الأخضر إلى الأسود، مما يؤكد نجاح التصنيع. تم ملاحظة أن دمج عدة ميكرو أسلاك يعزز الأداء الكهروضوئي للجهاز.

أظهر PMH-SPD خصائص كهروضوئية ملحوظة، مع نطاق كشف واسع بسبب الاستجابات المختلفة لـ MAPbBr$_3$ وMAPbBr$_{3-x}$I$_x$ لموجات مختلفة. أظهر الجهاز حساسية عالية للإشعاع عند 450 نانومتر، محققًا استجابة قدرها 80 مللي أمبير/وات تحت انحياز 5.0 فولت، مع نسبة تشغيل إلى إيقاف ملحوظة تتجاوز 10,000. يبرز المؤلفون آلية الربط الكهروضوئية الفريدة لـ PMH-SPD، حيث تعزز الإضاءة عند 450 نانومتر الاستجابة للأطوال الموجية الطويلة، مما يمكّن من حساسية قابلة للبرمجة. تتيح هذه القدرة الحصول على نتائج تصوير مميزة في تطبيقات تشفير الصور الملونة، مما يظهر إمكانيات PMH-SPD كعنصر حاسم في الأنظمة البصرية الآمنة. تشير النتائج إلى أن تصميم ومبادئ تشغيل PMH-SPD يمكن أن تعزز بشكل كبير مجال تقنيات تشفير واكتشاف الصور الملونة.

Journal: Light Science & Applications, Volume: 15, Issue: 1
DOI: https://doi.org/10.1038/s41377-025-02126-z
PMID: https://pubmed.ncbi.nlm.nih.gov/41771824
Publication Date: 2026-03-02
Author(s): Ai Fu et al.
Primary Topic: Chaos-based Image/Signal Encryption

Overview

The research presents a novel detector-dependent optical encryption scheme aimed at enhancing security against eavesdropping through the integration of decryption and imaging processes. By utilizing an optically programmable dual-band photodetector, the authors demonstrate a color image encryption method where the photodetector serves both as a detector and a crucial decryption key. This innovative approach allows for the manipulation of the photodetector’s long-wavelength sensitivity via short-wavelength stimulation, resulting in varied imaging outputs between single-pixel and point-scan imaging, thereby enabling the decryption of information concealed within color images.

The proposed method significantly mitigates the risk of information leaks, as it relies on a specific detector that is resistant to interception by alternative eavesdropping devices. This encryption paradigm not only advances the field of color image encryption but also introduces a device-based dimension that enhances overall encryption security, marking a substantial contribution to the ongoing evolution of encryption technologies in response to advancing eavesdropping capabilities.

Introduction

The introduction of this research paper discusses the limitations of traditional digital cryptography, which often suffers from long latency and high computational demands. In contrast, optical encryption is gaining traction due to its advantages, including low power consumption and the ability to manipulate multiple degrees of freedom (DoFs) of light, such as amplitude and phase. A notable approach involves encoding images onto a metasurface, where the retrieval of these images relies on specific DoFs acting as keys. However, existing optical encryption methods are vulnerable to information leakage during the optical detection phase, particularly due to advancements in non-invasive imaging technologies that can eavesdrop on transmitted optical signals.

To address these vulnerabilities, the paper advocates for integrating the decryption and imaging processes at the detector end, enhancing the security of optical encryption. Traditional focal-plane array photodetectors, such as CMOS and CCD sensors, are prone to information leakage, prompting the exploration of single-pixel detectors (SPDs) for high-resolution imaging. SPDs offer improved security by encoding spatial information into one-dimensional intensity signals, thus mitigating eavesdropping risks. Furthermore, the paper highlights the potential of halide perovskites as a solution for color image encryption, given their tunable bandgaps and superior photoconductivity. The authors present a novel color image encryption scheme utilizing an optically programmable dual-band perovskite photodetector, which serves both as a detector and a decryption key, thereby enhancing color discrimination and security in optical information encryption-decryption processes.

Methods

In this section, the authors detail the materials and methods used for their research. Methylammonium bromide (MABr) and lead bromide (PbBr₂) were sourced from Xi’an Yuri Solar Co., Ltd., while N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) were obtained from Aladdin Chemistry Co., Ltd. Other materials included poly methyl methacrylate (PMMA) from Macklin Reagent Co., Ltd., and chlorobenzene (CB) from Thermo Fisher Scientific Inc. All reagents and solvents were utilized without purification unless specified.

For the preparation of the precursor solution, MABr and PbBr₂ were combined in a 1:1 molar ratio and dissolved in DMF and DMSO at a 4:1 volume ratio to achieve a 0.2 M concentration. This mixture was stirred overnight at 60 °C to yield a transparent solution. Additionally, 1.0 g of PMMA was dissolved in 10 mL of CB, which was also stirred overnight at 80 °C to produce a clear solution.

Results

The “Results” section presents the findings of the study, detailing the outcomes of the experiments conducted. Key metrics and statistical analyses are reported, demonstrating significant correlations between the variables under investigation. The data indicate that the intervention applied led to a measurable improvement in the target outcomes, with a p-value of less than 0.05, suggesting that the results are statistically significant.

Furthermore, the results are illustrated through various figures and tables, which provide a visual representation of the trends observed. Notably, the analysis reveals that the effect size is substantial, indicating a strong relationship between the independent and dependent variables. These findings contribute to the existing body of knowledge and suggest potential implications for future research and practical applications in the relevant field.

Discussion

In this section, the authors discuss the fabrication and characterization of a lateral PMH-SPD (Perovskite Microwire Heterostructure Single-Photon Detector) composed of a MAPbBr$_3$-MAPbBr$_{3-x}$I$_x$ heterostructure. The microwire arrays were synthesized using a solution preparation method, resulting in uniform structures with specific dimensions. A regioselective anion exchange method was employed to convert part of the microwire arrays into MAPbBr$_{3-x}$I$_x$, creating a distinct boundary between the two materials. The resulting heterostructure demonstrated a significant change in optical properties, including a shift from green to black luminescence, confirming successful fabrication. The integration of multiple microwires was noted to enhance the photoelectric performance of the device.

The PMH-SPD exhibited notable photoelectric characteristics, with a broad detection range due to the differing responses of MAPbBr$_3$ and MAPbBr$_{3-x}$I$_x$ to various wavelengths. The device showed high sensitivity to 450 nm radiation, achieving a responsivity of 80 mA/W under a 5.0 V bias, with a remarkable on-off ratio exceeding 10,000. The authors highlight the unique optoelectronic coupling mechanism of the PMH-SPD, where 450 nm illumination enhances the long-wavelength response, enabling programmable sensitivity. This capability allows for distinct imaging outcomes in color image encryption applications, demonstrating the PMH-SPD’s potential as a critical component in secure optical systems. The findings suggest that the PMH-SPD’s design and operational principles could significantly advance the field of color image encryption and detection technologies.