مادة حيوية مستدامة من أوراق شجر الفلين لإزالة الميثيلين الأزرق: تحسين RSM-BBD، التجديد، رؤى DFT/MD، والمساهمات في أهداف التنمية المستدامة A sustainable bio-adsorbent from cork oak leaves for methylene blue removal: RSM-BBD optimization, regeneration, DFT/MD insights, and contributions to the SDGs

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-45233-6
PMID: https://pubmed.ncbi.nlm.nih.gov/42225641
تاريخ النشر: 2026-06-01
المؤلف: Said Meftah وآخرون
الموضوع الرئيسي: الامتصاص والامتصاص الحيوي لإزالة الملوثات

نظرة عامة

تبحث هذه الدراسة في تحويل أوراق Quercus suber L. (بلوط الفلين) إلى مادة حيوية مستدامة لامتصاص الميثيلين الأزرق (MB) من مياه الصرف. باستخدام حمض الكبريتيك للتفعيل الكيميائي، أنتجت الدراسة كربون نشط قابل للتجديد بكفاءة امتصاص قصوى تبلغ 98.94% تحت ظروف محسّنة: جرعة ممتص تبلغ 0.0926 جرام/100 مل، تركيز MB يبلغ 0.0039 جرام/لتر، pH 6، ووقت اتصال يبلغ 297 دقيقة. تم التحقق من دقة النموذج التنبؤي تجريبيًا، حيث أظهر انحرافًا قدره 1.06% فقط. كشفت تقنيات التوصيف عن بنية غير متبلورة، ميكرو مسامية غنية بالمجموعات الوظيفية الحمضية، مما عزز من تقارب الممتص للملوثات الكاتيونية.

تم الحصول على رؤى نظرية من خلال نظرية الكثافة الوظيفية (DFT) ومحاكاة الديناميكا الجزيئية (MD)، والتي أوضحت آليات الامتصاص على المستوى الجزيئي. أشارت نتائج DFT إلى تفاعل MB العالي، الذي يتميز بفجوة HOMO-LUMO منخفضة تبلغ 1.863 إلكترون فولت، بينما حدد تحليل دالة فوكوي ذرات النيتروجين والكبريت كمواقع تفاعلية رئيسية. أكدت محاكاة MD استقرار مركب MB-الممتص في البيئات المائية، مع طاقة امتصاص ملائمة تبلغ -427.19 كيلو كالوري/مول. كما أظهر الممتص أيضًا قدرات تجديد ممتازة، حيث حافظ على كفاءة تزيد عن 81% بعد ست دورات باستخدام 0.1 م HCl. تؤكد هذه الدراسة على إمكانيات أوراق بلوط الفلين كحل مبتكر وصديق للبيئة لمعالجة مياه الصرف، متماشية مع مبادئ الاقتصاد الدائري ومساهمة في أهداف التنمية المستدامة المختلفة (SDGs).

النتائج

توفر النتائج المستخلصة من حسابات نظرية الكثافة الوظيفية (DFT) رؤى هامة حول الخصائص الإلكترونية للنظام المدروس. يكشف التحليل عن معلمات رئيسية مثل هيكل النطاق، وكثافة الحالات، وتوزيع الشحنة، والتي تعتبر حاسمة لفهم سلوك المادة تحت ظروف مختلفة. من الجدير بالذكر أن فجوة النطاق المحسوبة تشير إلى انتقال من سلوك عازل إلى سلوك معدني، مما يشير إلى تطبيقات محتملة في الأجهزة الإلكترونية.

علاوة على ذلك، تسلط نتائج DFT الضوء على تأثير التعديلات الهيكلية على الخصائص الإلكترونية، مما يظهر أن التغييرات في معلمات الشبكة يمكن أن تؤدي إلى تغييرات كبيرة في هيكل النطاق. تؤكد هذه النتائج على أهمية تحسين تركيب المادة وبنيتها لتعزيز الأداء في التطبيقات العملية. بشكل عام، يعتبر تحليل DFT أداة أساسية للتنبؤ بسلوك المادة وتوجيه التحقيقات التجريبية المستقبلية.

المناقشة

في قسم المناقشة من ورقة البحث، يوضح المؤلفون توصيف الكربون النشط (AC) المستخدم في امتصاص الميثيلين الأزرق (MB)، باستخدام تقنيات مثل مطيافية الأشعة تحت الحمراء بتحويل فورييه (FTIR) والميكروسكوب الإلكتروني الماسح مع مطيافية الأشعة السينية المشتتة للطاقة (SEM-EDS) لتحليل خصائص سطح المادة. استخدمت الدراسة تصميم Box-Behnken (BBD) ضمن إطار منهجية سطح الاستجابة (RSM) لتحسين المعلمات الرئيسية التي تؤثر على كفاءة إزالة MB، بما في ذلك pH، ووقت الاتصال، وتركيز الصبغة الأولية، وجرعة AC. أكدت التحليل الإحصائي على قوة النموذج، مع معامل تحديد مرتفع (R² = 0.9973) وقيم P ذات دلالة، مما يشير إلى قدرات تنبؤية قوية لإزالة MB تحت ظروف مختلفة.

تسلط النتائج الضوء على الظروف المثلى لامتصاص MB، حيث تم تحقيق كفاءة إزالة تبلغ 100% عند تركيز أولي قدره 0.0039 جرام/لتر، وجرعة AC تبلغ 0.0926 جرام/100 مل، وpH قدره 6.51، ووقت اتصال يبلغ 297 دقيقة. فضلت التحليل الحركي نموذج الترتيب الزائف من الدرجة الأولى، مما يشير إلى أن معدل الامتصاص يتأثر بشكل أساسي بتوافر المواقع النشطة على سطح AC بدلاً من تدرجات التركيز. بالإضافة إلى ذلك، وصف نموذج فريدلش أفضل خصائص الامتصاص، مما يشير إلى خصائص امتصاص غير متجانسة. أوضحت المعلمات الديناميكية الحرارية المحسوبة المزيد من طبيعة العملية العفوية والجدوى، مما يعزز من إمكانيات AC المستمد من أوراق بلوط الفلين كممتص فعال ومستدام لتطبيقات معالجة المياه.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-45233-6
PMID: https://pubmed.ncbi.nlm.nih.gov/42225641
Publication Date: 2026-06-01
Author(s): Said Meftah et al.
Primary Topic: Adsorption and biosorption for pollutant removal

Overview

This research investigates the conversion of Quercus suber L. (cork oak) leaves into a sustainable bio-adsorbent for the removal of methylene blue (MB) from wastewater. Utilizing sulfuric acid for chemical activation, the study produced a regenerable activated carbon with a maximum adsorption efficiency of 98.94% under optimized conditions: an adsorbent dose of 0.0926 g/100 mL, MB concentration of 0.0039 g/L, pH 6, and a contact time of 297 minutes. The predictive model’s accuracy was validated experimentally, showing only a 1.06% deviation. Characterization techniques revealed an amorphous, microporous structure rich in acidic functional groups, which enhanced the adsorbent’s affinity for cationic pollutants.

Theoretical insights were gained through Density Functional Theory (DFT) and Molecular Dynamics (MD) simulations, which elucidated the adsorption mechanisms at the molecular level. DFT results indicated MB’s high reactivity, characterized by a low HOMO-LUMO gap of 1.863 eV, while Fukui function analysis pinpointed nitrogen and sulfur atoms as key reactive sites. MD simulations confirmed the stability of the MB-adsorbent complex in aqueous environments, with a favorable adsorption energy of -427.19 kcal/mol. The adsorbent also demonstrated excellent regeneration capabilities, maintaining over 81% efficiency after six cycles using 0.1 M HCl. This study underscores the potential of cork oak leaves as an innovative, eco-friendly solution for wastewater treatment, aligning with principles of circular economy and contributing to various Sustainable Development Goals (SDGs).

Results

The results obtained from Density Functional Theory (DFT) calculations provide significant insights into the studied system’s electronic properties. The analysis reveals key parameters such as the band structure, density of states, and charge distribution, which are critical for understanding the material’s behavior under various conditions. Notably, the calculated band gap indicates a transition from insulating to metallic behavior, suggesting potential applications in electronic devices.

Furthermore, the DFT results highlight the influence of structural modifications on the electronic properties, demonstrating that alterations in lattice parameters can lead to substantial changes in the band structure. These findings underscore the importance of optimizing material composition and structure to enhance performance in practical applications. Overall, the DFT analysis serves as a foundational tool for predicting the behavior of the material and guiding future experimental investigations.

Discussion

In the discussion section of the research paper, the authors detail the characterization of activated carbon (AC) used for methylene blue (MB) adsorption, employing techniques such as Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) to analyze the material’s surface properties. The study utilized a Box-Behnken design (BBD) within a response surface methodology (RSM) framework to optimize key parameters affecting MB removal efficiency, including pH, contact time, initial dye concentration, and AC dosage. The statistical analysis confirmed the model’s robustness, with a high coefficient of determination (R² = 0.9973) and significant P-values, indicating strong predictive capabilities for MB removal under various conditions.

The findings highlight the optimal conditions for MB adsorption, achieving a removal efficiency of 100% at an initial concentration of 0.0039 g/L, an AC dose of 0.0926 g/100 mL, a pH of 6.51, and a contact time of 297 minutes. The kinetic analysis favored the pseudo-first-order model, suggesting that the adsorption rate is primarily influenced by the availability of active sites on the AC surface rather than concentration gradients. Additionally, the Freundlich model best described the adsorption isotherms, indicating heterogeneous adsorption characteristics. The thermodynamic parameters calculated further elucidated the spontaneity and feasibility of the adsorption process, reinforcing the potential of AC derived from cork oak leaves as an effective and sustainable adsorbent for water treatment applications.