DOI: https://doi.org/10.61424/ijans.v4i1.696
تاريخ النشر: 2026-03-19
المؤلف: Manoj Kumar Srivastava وآخرون
الموضوع الرئيسي: تقنيات أخذ العينات والتقدير
نظرة عامة
تقدم ورقة البحث نهجًا جديدًا لتقدير متوسط السكان المحدود لخاصية حساسة باستخدام مُقدّر تقنية الاستجابة العشوائية من نوع الفرق (RRT). يهدف هذا الأسلوب إلى تقليل التحيز الناتج عن ردود الاستطلاع المراوغة من خلال دمج المتغيرات المساعدة ومراتبها. يستخرج المؤلفون تعبيرات للانحياز ومتوسط مربع الخطأ (MSE) للمقدّر المقترح حتى تقريب من الدرجة الأولى. تشير المقارنات التجريبية إلى أن هذا المقدّر الجديد يتفوق بشكل كبير على البدائل الموجودة، خاصة عند استخدام مراتب المتغيرات المساعدة.
في الختام، تدعو الدراسة إلى استخدام نموذج RRT الإضافي مع متغيرات مساعدة فردية أو مزدوجة وعينة عشوائية بسيطة لتعزيز تقدير متوسطات السكان للمتغيرات الحساسة. من خلال تخصيص مراتب للمتغيرات المساعدة، يظهر المقدّر المقترح كفاءة نسبية محسّنة مقارنة بالطرق التقليدية. تؤكد النتائج على قيمة الاستفادة من معلومات الرتبة المتاحة بسهولة لتعزيز كفاءة المقدّر دون تكبد تكاليف إضافية.
مقدمة
تتناول مقدمة الورقة التحديات التي يواجهها الباحثون عند جمع بيانات حساسة من السكان البشر، مثل المعلومات المتعلقة بالميول الجنسية، وإدمان المخدرات، والعنف المنزلي. غالبًا ما يتردد المستجيبون في الكشف عن مثل هذه التفاصيل الشخصية، مما يؤدي إلى تحيزات محتملة وعدم دقة في البيانات المجمعة. للتخفيف من هذه القضايا، قدم وارنر (1965) تقنية الاستجابة العشوائية (RRT)، التي تم توسيعها منذ ذلك الحين من قبل باحثين مختلفين لتحسين تقدير الخصائص الحساسة مع تقليل الردود المراوغة.
تحدد الورقة هيكل الأقسام التالية، بدءًا بمناقشة المصطلحات المتعلقة بنموذج الاستجابة المربكة RRT في القسم 2. يستعرض القسم 3 المقدّرات الموجودة لمتوسط السكان باستخدام نموذج إضافي، بينما يقترح القسم 4 فئة جديدة من مقدّرات RRT من نوع الفرق للسكان المحدودين، بما في ذلك تعبيرات للانحياز ومتوسط مربع الخطأ (MSE). يقيم القسم 5 كفاءة المقدّرات المقترحة مقارنة بالموجودة، تليه دراسة محاكاة في القسم 6 للتحقق من النتائج التجريبية. أخيرًا، يفسر القسم 7 النتائج، ويختتم القسم 8 الدراسة.
النتائج
تشير النتائج المقدمة في الجداول 2 و3 و4 إلى أن المقدّر المقترح \( t_v \) يظهر كفاءة نسبية متفوقة مقارنة بالمقدّرات \( t_{v1} \) و \( t_{v2} \) عبر السكان 1 و2 و3. تشير هذه التحسينات إلى أن دمج مراتب المتغير المساعد \( X \) جنبًا إلى جنب مع المعلومات من المتغير المساعد \( X \) يعزز أداء المقدّر. علاوة على ذلك، يتفوق \( t_v \) على مجموعة من المقدّرات الموجودة، بما في ذلك \( t_Y, t_R, t_{Reg}, t_{GRR}, t_{GER}, t_{ER}, \) و \( t_{GR} \).
على وجه التحديد، بالنسبة للمعامل \( \eta \)، يحقق المقدّر المقترح أقصى كفاءة نسبية عند \( \eta = -2 \)، مع قيم 176.70 و391.26 و349.01 للسكان 1 و2 و3، على التوالي. من الجدير بالذكر أن هذه الكفاءة تنخفض مع زيادة \( \eta \) من -2 إلى 2. تكشف التحليلات أيضًا أن استخدام المرّات فقط لا يؤدي إلى تحسين الكفاءة النسبية، كما يتضح من أداء \( t_{v2} \) عبر جميع القيم.
المناقشة
في هذا القسم، يناقش المؤلفون تقدير متوسطات السكان للمتغيرات الحساسة باستخدام نموذج تقنية الاستجابة العشوائية الإضافية (RRT)، مع دمج المتغيرات المساعدة ومراتبها. تقدم الدراسة فئة جديدة من المقدّرات التي تستفيد من كل من المتغيرات المساعدة غير الحساسة ومراتبها، والتي ترتبط بالمتغير الحساس قيد التحقيق. يُعرّف المقدّر المقترح على أنه
\[
t_\nu = [w_1 \bar{z} + w_2 (\bar{X} – \bar{x}) + w_3 (\bar{R}_x – \bar{r}_x)] \exp\left(\frac{\eta(\bar{X} – \bar{x})}{\bar{X} + \bar{x}}\right),
\]
حيث \(w_1\) و\(w_2\) و\(w_3\) هي ثوابت تم تحسينها لتقليل متوسط مربع الخطأ (MSE). يستخرج المؤلفون الانحياز وMSE للمقدّر المقترح، مما يظهر أنه يمكن أن يتفوق على المقدّرات الموجودة في ظل ظروف معينة، خاصة عندما تكون العلاقة بين المتغير المساعد والمتغير الحساس قوية.
تؤكد الدراسة التجريبية التي أجريت كفاءة المقدّرات المقترحة مقارنة بالطرق الموجودة. تشير النتائج إلى أن المقدّرات الجديدة تحقق كفاءة نسبية محسّنة (PRE) عبر أحجام عينات وسكان مختلفة، مما يؤكد أن استخدام معلومات إضافية، مثل المرّات، يعزز دقة تقديرات متوسطات السكان للمتغيرات الحساسة. تؤكد هذه النتيجة على إمكانية دمج المعلومات المساعدة في منهجيات الاستطلاع لتحقيق نتائج إحصائية أكثر موثوقية.
DOI: https://doi.org/10.61424/ijans.v4i1.696
Publication Date: 2026-03-19
Author(s): Manoj Kumar Srivastava et al.
Primary Topic: Survey Sampling and Estimation Techniques
Overview
The research paper presents a novel approach to estimating the finite population mean of a sensitive characteristic using a difference type Randomized Response Technique (RRT) estimator. This method aims to reduce bias from evasive survey responses by incorporating auxiliary variables and their ranks. The authors derive expressions for bias and mean squared error (MSE) of the proposed estimator up to first-order approximation. Empirical comparisons indicate that this new estimator significantly outperforms existing alternatives, particularly when auxiliary variable ranks are utilized.
In conclusion, the study advocates for the use of an additive RRT model with single or dual auxiliary variables and simple random sampling to enhance the estimation of population means for sensitive variables. By assigning ranks to the auxiliary variables, the proposed estimator demonstrates improved percent relative efficiency compared to traditional methods. The findings underscore the value of leveraging readily available rank information to enhance estimator efficiency without incurring additional costs.
Introduction
The introduction of the paper addresses the challenges researchers face when collecting sensitive data from human populations, such as information regarding sexual orientation, drug addiction, and domestic violence. Respondents often hesitate to disclose such personal details, leading to potential biases and inaccuracies in the data collected. To mitigate these issues, Warner (1965) introduced the randomized response technique (RRT), which has since been expanded upon by various researchers to improve the estimation of sensitive attributes while minimizing evasive responses.
The paper outlines the structure of the subsequent sections, beginning with a discussion of terminology related to the scrambled response RRT model in Section 2. Section 3 reviews existing estimators for the population mean using an additive model, while Section 4 proposes a new class of difference-type RRT estimators for finite populations, including expressions for bias and mean squared error (MSE). Section 5 evaluates the efficiency of the proposed estimators compared to existing ones, followed by a simulation study in Section 6 to validate the empirical findings. Finally, Section 7 interprets the results, and Section 8 concludes the study.
Results
The results presented in Tables 2, 3, and 4 indicate that the proposed estimator \( t_v \) demonstrates superior percent relative efficiency compared to estimators \( t_{v1} \) and \( t_{v2} \) across populations 1, 2, and 3. This improvement suggests that incorporating ranks of the auxiliary variable \( X \) alongside information from the auxiliary variable \( X \) enhances the estimator’s performance. Furthermore, \( t_v \) outperforms a range of existing estimators, including \( t_Y, t_R, t_{Reg}, t_{GRR}, t_{GER}, t_{ER}, \) and \( t_{GR} \).
Specifically, for the parameter \( \eta \), the proposed estimator achieves maximum percent relative efficiency at \( \eta = -2 \), with values of 176.70, 391.26, and 349.01 for populations 1, 2, and 3, respectively. Notably, this efficiency declines as \( \eta \) increases from -2 to 2. The analysis further reveals that using ranks alone does not yield improved percent relative efficiency, as evidenced by the performance of \( t_{v2} \) across all values.
Discussion
In this section, the authors discuss the estimation of population means for sensitive variables using an additive randomized response technique (RRT) model, incorporating auxiliary variables and their ranks. The study introduces a new class of estimators that leverage both non-sensitive auxiliary variables and their ranks, which are correlated with the sensitive variable under investigation. The proposed estimator is defined as
\[
t_\nu = [w_1 \bar{z} + w_2 (\bar{X} – \bar{x}) + w_3 (\bar{R}_x – \bar{r}_x)] \exp\left(\frac{\eta(\bar{X} – \bar{x})}{\bar{X} + \bar{x}}\right),
\]
where \(w_1\), \(w_2\), and \(w_3\) are constants optimized to minimize the mean square error (MSE). The authors derive the bias and MSE of the proposed estimator, demonstrating that it can outperform existing estimators under certain conditions, particularly when the correlation between the auxiliary variable and the sensitive variable is strong.
The empirical study conducted further validates the proposed estimators’ efficiency compared to existing methods. The results indicate that the new estimators yield improved percent relative efficiency (PRE) across various sample sizes and populations, confirming that utilizing additional information, such as ranks, enhances the accuracy of population mean estimates for sensitive variables. This finding underscores the potential of incorporating auxiliary information in survey methodologies to achieve more reliable statistical outcomes.
