DOI: https://doi.org/10.1007/s00397-026-01556-9
تاريخ النشر: 2026-03-07
المؤلف: Mortaza Ali Ghorbani وآخرون
الموضوع الرئيسي: دراسات الريولوجيا وديناميات السوائل
نظرة عامة
تناقش هذه القسم تطوير والتحقق من صحة نموذج لزوجة متعدد المتغيرات غير المباشر (MVI) للتركيبات المطاطية ذات الانسيابية المنخفضة، وهو أمر أساسي لتحسين أدائها في التطبيقات الصناعية. تكافح نماذج اللزوجة التقليدية، مثل قانون القوة، وكاراو، وكروس، لدمج تأثيرات درجة الحرارة دون أن تصبح معقدة رياضيًا ومكثفة حسابيًا عند دمجها مع نماذج درجة الحرارة مثل أرهينيوس، وWLF، وVTF. نموذج MVI، المستمد من خلال الانحدار الرمزي القائم على التعلم الآلي، يبسط هذه التعقيد من خلال دمج الاعتماد على معدل القص ودرجة الحرارة في تعبير واحد بينما يلتقط بدقة لزوجة عدم القص من خلال هضبة نيوتونية.
تم تدريب نموذج MVI على بيانات راسم اللزوجة الشعري تحت ضغط عالٍ، محققًا معامل تحديد (R²) قدره 0.99 على بيانات الاختبار، وأظهر تعميمًا قويًا مع تحقق مستقل أسفر عن قيم R² تتراوح بين 0.957 و0.990 عبر مواد مختلفة. أشارت محاكاة ديناميكا السوائل الحاسوبية (CFD) لتدفق الشعيرات إلى أن نموذج MVI لم يتطابق فقط مع استجابة الضغط-التدفق للمطاط بدقة مقارنة بنموذج كاراو-أرهينيوس، بل قلل أيضًا من الجهد الحسابي من خلال تقليل الحاجة إلى حسابات أسية متكررة. وهذا يضع نموذج MVI كحل فعال وعملي لنمذجة اللزوجة في معالجة البوليمرات وتطبيقات تدفق السوائل، مما يعزز كل من الدقة والكفاءة الحسابية في المحاكاة العددية.
مقدمة
تناقش المقدمة السلوك الريولوجي للسوائل، مع التأكيد على التمييز بين السوائل النيوتونية وغير النيوتونية. تحافظ السوائل النيوتونية على لزوجة ثابتة بغض النظر عن معدل القص، بينما تظهر السوائل غير النيوتونية تباينات لزوجة معقدة تتأثر بمعدل القص ودرجة الحرارة والضغط. من بين السوائل غير النيوتونية، تعتبر السوائل ذات الانسيابية المنخفضة (الزائفة البلاستيكية)، التي تنخفض لزوجتها مع زيادة معدل القص، مهمة بشكل خاص في التطبيقات الصناعية مثل معالجة البوليمرات. تم تطوير نماذج تركيب مختلفة، بما في ذلك نماذج كاراو وكروس وقانون القوة، لوصف سلوك الانسيابية المنخفضة، مع تفضيل نموذج كاراو لقدرته على التقاط الحدود المنخفضة والعالية للقص.
تسلط المقدمة الضوء أيضًا على أهمية الاعتماد على درجة الحرارة في اللزوجة، خاصة في التدفقات غير المتساوية الحرارة، حيث يتم استخدام نماذج مثل أرهينيوس، وويليامز-لاندل-فيري (WLF)، وفوجل-فولشر-تامان (VFT). غالبًا ما يتم دمج هذه النماذج مع نماذج الانسيابية المنخفضة لوصف لزوجة انصهارات البوليمر بدقة أثناء المعالجة. على الرغم من التقدم في نماذج اللزوجة الكلاسيكية، فإن تعقيد التقاط التفاعل بين معدل القص ودرجة الحرارة بدقة يتطلب نهجًا أبسط وأكثر كفاءة. استكشفت الدراسات الحديثة تطبيق تقنيات الذكاء الاصطناعي (AI) والتعلم الآلي (ML) للتنبؤ باللزوجة، مما يظهر دقة محسنة مقارنة بالطرق التقليدية. ومع ذلك، لا تزال التحديات قائمة بشأن تعقيد وملاءمة هذه النماذج الذكية في التطبيقات الواقعية. تهدف هذه الدراسة إلى تطوير نموذج لزوجة بسيط ولكنه دقيق باستخدام الذكاء الاصطناعي الذي يدمج بفعالية تأثيرات معدل القص ودرجة الحرارة، مما يضمن قابليته للتطبيق في محاكاة ديناميكا السوائل الحاسوبية (CFD).
النتائج
في هذا القسم، يقدم المؤلفون قياسات اللزوجة المصححة لتركيبة مطاطية ويقدمون نموذج لزوجة جديد، يسمى نموذج MVI. يعمل هذا النموذج كبديل حسابي فعال للنماذج الريولوجية المعروفة مثل كاراو-أرهينيوس وكروس-WLF، حيث يوفر تعبيرًا مغلقًا واحدًا يأخذ في الاعتبار معدل القص ودرجة الحرارة في نفس الوقت. يظهر نموذج MVI دقة مقارنة بنموذج كاراو-أرهينيوس بينما يتجنب عوامل درجة الحرارة الأسية المعقدة، مما يعزز كفاءة التناسب ويقلل من التكاليف الحسابية. تم التحقق من أداء النموذج ضد بيانات المطاط ومجموعات بيانات مستقلة لثلاث مواد حرارية بلاستيكية، محققًا قيم R² عالية (0.957-0.990) وقيم منخفضة لمتوسط الجذر التربيعي للمتبقيات الموحدة (RMSSR)، مما يشير إلى دقة تنبؤية قوية.
علاوة على ذلك، تم تنفيذ نموذج MVI في محاكاة ديناميكا السوائل الحاسوبية (CFD) باستخدام محلل pimpleFoam الموسع، مما يسمح بمقارنة مباشرة مع نموذج كاراو-أرهينيوس تحت ظروف متطابقة. أظهر نموذج MVI انحرافًا في انخفاض الضغط أقل من 0.6% عن القيم التجريبية، متفوقًا بشكل كبير على نموذج كاراو-أرهينيوس، الذي انحرف بحوالي 9%. كما تم تسليط الضوء على كفاءة نموذج MVI الحسابية، حيث يتطلب حوالي 1.5-2.5% أقل من الوقت الحسابي أثناء المحاكاة، وهو أمر مفيد بشكل خاص للتطبيقات واسعة النطاق. بشكل عام، تضع بساطة نموذج MVI ودقته التنبؤية العالية وإمكاناته للتحسينات المستقبلية كأداة قيمة في معالجة البوليمرات وسيناريوهات تدفق السوائل.
المناقشة
في هذا القسم، يصف المؤلفون المنهجية المستخدمة لاستنتاج نموذج لزوجة غير خطي يأخذ في الاعتبار كل من معدل القص ودرجة الحرارة، باستخدام قياسات راسم اللزوجة على تركيبة مطاطية معينة. تم إجراء التجارب باستخدام راسم لزوجة شعري تحت ضغط عالٍ، وتحديدًا ريسوجراف 25/50، عبر نطاق درجة حرارة من 70 °C إلى 120 °C ومعدلات قص تتراوح من حوالي 10 s\(^{-1}\) إلى 5000 s\(^{-1}\). نفذت الدراسة نظامًا ثنائي القالب لتصحيح خسائر المدخلات، باستخدام طريقة باجلي لعزل انخفاض الضغط الحقيقي على طول الشعيرة. كما يوضح المؤلفون تطبيق افتراضات راسم اللزوجة الشعري القياسية وتصحيح وايسنبرغ-رابينويتش لاستنتاج قيم إجهاد القص واللزوجة بدقة.
تنتقد المناقشة أيضًا نماذج اللزوجة الكلاسيكية، مع التأكيد على قيود نموذج قانون القوة في تمثيل الهضاب النيوتونية والحاجة إلى نماذج أكثر تعقيدًا مثل كاراو وكروس لالتقاط سلوك الانسيابية المنخفضة. تم اختيار نموذج كاراو-أرهينيوس في النهاية كخط أساس للتحليل نظرًا لقدرته على دمج الاعتماد على معدل القص مع تأثيرات درجة الحرارة، مما يوفر إطارًا قويًا لتنبؤات اللزوجة. تم تحسين معلمات التناسب باستخدام طرق المربعات غير الخطية، مما يضمن التناسق الفيزيائي والدقة في النموذج. تختتم القسم بتسليط الضوء على استخدام الانحدار الرمزي كنهج تعلم آلي لاستنتاج معادلة لزوجة فريدة، مما يعزز قابلية تفسير وكفاءة النموذج الحسابية لاستخدامها في محاكاة ديناميكا السوائل الحاسوبية (CFD).
DOI: https://doi.org/10.1007/s00397-026-01556-9
Publication Date: 2026-03-07
Author(s): Mortaza Ali Ghorbani et al.
Primary Topic: Rheology and Fluid Dynamics Studies
Overview
This section discusses the development and validation of the Multi-Variable Implicit (MVI) viscosity model for shear-thinning elastomer compounds, which is essential for optimizing their performance in industrial applications. Traditional viscosity models, such as Power Law, Carreau, and Cross, struggle to incorporate temperature effects without becoming mathematically complex and computationally intensive when combined with temperature models like Arrhenius, WLF, and VTF. The MVI model, derived through machine learning-based symbolic regression, simplifies this complexity by integrating shear-rate and temperature dependence into a single expression while accurately capturing zero-shear viscosity through a Newtonian plateau.
The MVI model was trained on high-pressure capillary rheometer data, achieving a coefficient of determination (R²) of 0.99 on test data, and demonstrated strong generalization with independent validation yielding R² values between 0.957 and 0.990 across different materials. Capillary-flow Computational Fluid Dynamics (CFD) simulations indicated that the MVI model not only matched the pressure-flow response of the elastomer with accuracy comparable to the Carreau-Arrhenius model but also reduced computational effort by minimizing the need for repeated exponential calculations. This positions the MVI model as an efficient and practical solution for viscosity modeling in polymer processing and fluid flow applications, enhancing both accuracy and computational efficiency in numerical simulations.
Introduction
The introduction discusses the rheological behavior of fluids, emphasizing the distinction between Newtonian and non-Newtonian fluids. Newtonian fluids maintain a constant viscosity regardless of shear rate, while non-Newtonian fluids exhibit complex viscosity variations influenced by shear rate, temperature, and pressure. Among non-Newtonian fluids, shear-thinning (pseudoplastic) fluids, which decrease in viscosity with increasing shear rate, are particularly important in industrial applications such as polymer processing. Various constitutive models, including the Carreau, Cross, and Power Law models, have been developed to describe shear-thinning behavior, with the Carreau model being favored for its ability to capture both low- and high-shear limits.
The introduction also highlights the significance of temperature dependence in viscosity, particularly in non-isothermal flows, where models like Arrhenius, Williams-Landel-Ferry (WLF), and Vogel-Fulcher-Tammann (VFT) are employed. These models are often combined with shear-thinning models to accurately describe the viscosity of polymer melts during processing. Despite the advancements in classical viscosity models, the complexity of accurately capturing the interplay between shear rate and temperature necessitates simpler, more efficient approaches. Recent studies have explored the application of Artificial Intelligence (AI) and Machine Learning (ML) techniques to predict viscosity, demonstrating improved accuracy over traditional methods. However, challenges remain regarding the complexity and practicality of these AI models in real-world applications. This study aims to develop a straightforward yet accurate viscosity model using AI that effectively incorporates the effects of shear rate and temperature, ensuring applicability in Computational Fluid Dynamics (CFD) simulations.
Results
In this section, the authors present the corrected viscosity measurements of an elastomer compound and introduce a new viscosity model, termed the MVI model. This model serves as a numerically efficient surrogate for established rheological models like Carreau-Arrhenius and Cross-WLF, providing a single closed-form expression that simultaneously accounts for shear rate and temperature. The MVI model demonstrates comparable accuracy to the Carreau-Arrhenius model while avoiding complex exponential temperature factors, thereby enhancing fitting efficiency and reducing computational costs. The model’s performance is validated against elastomer data and independent datasets for three thermoplastic materials, achieving high R² values (0.957-0.990) and low Root Mean Squared Standardized Residual (RMSSR) values, indicating strong predictive accuracy.
Furthermore, the MVI model was implemented in Computational Fluid Dynamics (CFD) simulations using the extended pimpleFoam solver, allowing for direct comparison with the Carreau-Arrhenius model under identical conditions. The MVI model exhibited a pressure drop deviation of less than 0.6% from experimental values, significantly outperforming the Carreau-Arrhenius model, which deviated by around 9%. The MVI model’s computational efficiency was also highlighted, requiring approximately 1.5-2.5% less computational time during simulations, particularly advantageous for large-scale applications. Overall, the MVI model’s simplicity, high predictive accuracy, and potential for future enhancements position it as a valuable tool in polymer processing and fluid flow scenarios.
Discussion
In this section, the authors describe the methodology employed to derive a nonlinear viscosity model that accounts for both shear rate and temperature, utilizing rheometer measurements on a specific elastomer compound. The experiments were conducted using a high-pressure capillary rheometer, specifically the Rheograph 25/50, across a temperature range of 70 °C to 120 °C and shear rates from approximately 10 s\(^{-1}\) to 5000 s\(^{-1}\). The study implemented a two-die system to correct for entrance losses, applying the Bagley method to isolate the true pressure drop along the capillary. The authors also detail the application of standard capillary rheometry assumptions and the Weissenberg-Rabinowitsch correction to accurately derive shear stress and viscosity values.
The discussion further critiques classical viscosity models, emphasizing the limitations of the Power Law model in representing Newtonian plateaus and the need for more sophisticated models like Carreau and Cross to capture shear-thinning behavior. The Carreau-Arrhenius model was ultimately selected as the baseline for analysis due to its ability to integrate shear-rate dependence with temperature effects, providing a robust framework for viscosity predictions. The fitting parameters were optimized using nonlinear least-squares methods, ensuring physical consistency and accuracy in the model. The section concludes by highlighting the use of symbolic regression as a machine learning approach to derive a unique viscosity equation, enhancing the interpretability and computational efficiency of the model for use in computational fluid dynamics (CFD) simulations.
