GENIUS: إطار عمل ذكاء اصطناعي وكيل للتصميم والتنفيذ المستقل لبروتوكولات المحاكاة GENIUS: an agentic AI framework for autonomous design and execution of simulation protocols

شارك:
المجلة: Communications Materials، المجلد: 7، العدد: 1
DOI: https://doi.org/10.1038/s43246-026-01167-0
تاريخ النشر: 2026-04-28
المؤلف: Mohammad Soleymanibrojeni وآخرون
الموضوع الرئيسي: تعلم الآلة في علوم المواد

نظرة عامة

إطار GENIUS يعالج التحديات المتعلقة بتنفيذ هندسة المواد الحاسوبية المتكاملة (ICME) من خلال أتمتة توليد والتحقق من بروتوكولات محاكاة Quantum ESPRESSO (QE) واستعادة الأخطاء. من خلال دمج رسم بياني ذكي للمعرفة مع هيكل هرمي من نماذج اللغة الكبيرة (LLMs) وآلية استعادة الأخطاء ذات الحالة المنتهية، يقوم GENIUS بترجمة المطالبات التي ينتجها البشر إلى ملفات إدخال QE صالحة، محققًا معدل نجاح تحقق مبكر يبلغ حوالي 80% عبر 295 معيارًا. ومن الجدير بالذكر أنه يظهر معدل نجاح توليد بدون تدريب يبلغ 14.2%، مع معدل استعادة مثير للإعجاب يبلغ 76.3% لمحاولات فاشلة في البداية، مما يشير إلى أن معظم الأخطاء القابلة للاستعادة يتم معالجتها بسرعة.

تم تصميم بنية GENIUS لسد “فجوة المعرفة-الفعل” في علم المواد الحاسوبية، مما يسمح لغير الخبراء باستخدام أدوات المحاكاة المتقدمة دون الحاجة إلى معرفة برمجية واسعة. تشمل المكونات الرئيسية رسم بياني شامل للمعرفة يقلل من الأخطاء ويعزز الاتساق، وهيكل نموذج هرمي يحسن الأداء، ونظام استعادة أخطاء قوي يقلل من تفاعل المستخدم مع بناء الجملة المعقد للإدخال. من خلال تسهيل الوصول الأوسع إلى محاكاة الهيكل الإلكتروني، لا يسرع GENIUS فقط اكتشاف المواد ولكن أيضًا يدعم القابلية للتكرار والامتثال لممارسات البيانات FAIR. يمكن أن تمتد التحسينات المستقبلية إلى توسيع قدراته لتشمل رموز محاكاة إضافية ودمج تقنيات تحقق متقدمة، مما يعزز دوره في ديمقراطية هندسة المواد الحاسوبية.

طرق

في هذا القسم، يصف المؤلفون تطوير GENIUS، وهو إطار مصمم لتعزيز الوصول والكفاءة لطرق المحاكاة المعتمدة على Quantum Espresso (QE) في علم المواد الحاسوبية. بينما تعتبر QE هي التركيز الرئيسي، فإن الإطار قابل للتكيف مع رموز المحاكاة الذرية المختلفة، بما في ذلك الديناميات الجزيئية. يدمج GENIUS نماذج اللغة الكبيرة (LLMs) مع رسم بياني للمعرفة (KG) لإنشاء واجهة ذكية تقوم بأتمتة عمليات توليد والتحقق وتصحيح بروتوكولات المحاكاة المعقدة.

تتكون بنية GENIUS من ثلاثة مكونات رئيسية: نظام توصية، وحدة توليد بروتوكولات، ونظام معالجة الأخطاء الآلي، الذي يعالج نوعين من الأخطاء (المشار إليهما كخطأ 1 وخطأ 2). تعمل هذه المكونات على تبسيط سير العمل من إدخال المستخدم إلى توليد البروتوكول النهائي، مع التركيز على القابلية للتكرار والدقة وقابلية التكيف للمستخدم بما يتماشى مع المعايير العلمية المعمول بها في هذا المجال. كما يشير المؤلفون إلى أن الإشارات إلى الموارد الحاسوبية وأسماء النماذج تُعتبر معرفة شائعة، مما يعكس أساس الإطار في السياق الأكاديمي ذي الصلة.

نتائج

في هذا القسم، يقدم المؤلفون نتائج اختبار إطار GENIUS عبر عدة نماذج لغة كبيرة (LLMs) لتقييم أدائه في توليد بروتوكولات إدخال صالحة لحسابات نظرية الكثافة (DFT) باستخدام Quantum ESPRESSO (QE). تم تحليل مجموعة بيانات من 295 مطالبة تم إنشاؤها بواسطة البشر، مما كشف أن 235 من هذه المطالبات أنتجت بنجاح بروتوكولات محاكاة صالحة، مما أدى إلى معدل نجاح إجمالي يبلغ حوالي 79.7%. تم تصنيف المطالبات إلى أنواع أساسية (44.3%)، قياسية (48.5%)، ومعقدة (7.2%)، مع تحليل يشير إلى أن تعقيد المطالبات لا يعيق أداء الإطار بشكل جوهري. أظهر الإطار معدل نجاح بدون تدريب يبلغ 14.2%، حيث كانت المخرجات الأولية صالحة دون الحاجة إلى تصحيحات إضافية.

استخدم المؤلفون خريطة ذاتية التنظيم (SOM) لتصور المشهد الدلالي للمطالبات، مؤكدين وجود خطأ طوبولوجي منخفض (TE) يبلغ 0.0373 وخطأ كمي يبلغ 0.4970، مما يشير إلى تجميع فعال وتمثيل للبيانات المدخلة. كما أبرزت النتائج أهمية نظام التوصية، الذي يعزز بشكل كبير من احتمالية نجاح سير العمل. كشفت التحليلات أن أداء GENIUS يُعزى إلى حد كبير إلى تصميمه المعماري بدلاً من قدرات النماذج الأساسية فقط، كما يتضح من قدرة الإطار على التعامل مع مختلف المطالبات بفعالية عبر محاولات نماذج مختلفة. بشكل عام، تؤكد النتائج على إمكانيات إطار GENIUS في أتمتة محاكاة DFT بينما تقدم رؤى حول تفاعل المستخدم وتحسينات معالجة المطالبات.

نقاش

يقدم إطار GENIUS بنية ثلاثية الطبقات لأتمتة توليد بروتوكولات محاكاة Quantum Espresso (QE)، تتكون من نظام توصية، نظام توليد بروتوكولات، ونظام معالجة أخطاء آلي. يجمع نظام التوصية بيانات محددة عن المواد ويقترح معلمات المحاكاة، والتي يتم استخدامها بعد ذلك من قبل نظام توليد البروتوكولات لإنشاء بروتوكول محاكاة. يخضع هذا البروتوكول للتحقق النحوي من خلال برنامج QE، مع تفعيل وحدة معالجة الأخطاء عند فشل التحقق. يستخدم الإطار آلة ذات حالة منتهية (FSM) لإدارة تفاعلات المكونات، مما يضمن سير عمل منظم يفصل بين التفكير والتنفيذ، مما يسمح بالتحكم من قبل المستخدم على الإعدادات الرئيسية ويسهل نهج الإنسان في الحلقة للحسابات المعقدة.

في قلب GENIUS يوجد رسم بياني ذكي للمعرفة (KG) ينظم ويربط 247 عقدة و330 حافة من وثائق QE، مما يعزز استرجاع المعلومات ذات الصلة من خلال مطابقة الكلمات الرئيسية وطرق الوعي بالسياق. يساعد دمج نماذج اللغة الكبيرة (LLMs) في واجهة المستخدم، وتقييم المعلمات، ومعالجة رسائل الأخطاء، مع هيكل نموذج هرمي يحسن الأداء والتكلفة. يحسن نظام معالجة الأخطاء الآلي بشكل كبير من الاستعادة من فشل المحاكاة، محققًا معدل نجاح يزيد عن 76% للأخطاء القابلة للاستعادة في المحاولات الأولية. بشكل عام، يضيق GENIUS الفجوة بين رموز الهيكل الإلكتروني المتقدمة وإمكانية وصول المستخدم، مما يعزز المشاركة الأوسع في اكتشاف المواد مع ضمان القابلية للتكرار ودعم ممارسات البيانات FAIR. قد تمتد الأعمال المستقبلية لتشمل KG لتشمل وحدات QE إضافية ورموز محاكاة أخرى، مما يعزز قابلية تطبيق الإطار عبر مجالات مختلفة.

Journal: Communications Materials, Volume: 7, Issue: 1
DOI: https://doi.org/10.1038/s43246-026-01167-0
Publication Date: 2026-04-28
Author(s): Mohammad Soleymanibrojeni et al.
Primary Topic: Machine Learning in Materials Science

Overview

The GENIUS framework addresses the challenges of implementing Integrated Computational Materials Engineering (ICME) by automating the generation, validation, and error recovery of Quantum ESPRESSO (QE) simulation protocols. By integrating a smart knowledge graph with a tiered hierarchy of large language models (LLMs) and a finite-state error recovery mechanism, GENIUS translates human-generated prompts into valid QE input files, achieving an early execution validation success rate of approximately 80% across 295 benchmarks. Notably, it demonstrates a zero-shot generation success rate of 14.2%, with an impressive 76.3% recovery rate for initially failed attempts, indicating that most recoverable errors are addressed promptly.

The architecture of GENIUS is designed to bridge the “know-do gap” in computational materials science, allowing non-experts to utilize advanced simulation tools without needing extensive programming knowledge. Key components include a comprehensive knowledge graph that reduces errors and enhances consistency, a hierarchical model structure that optimizes performance, and a robust error recovery system that minimizes user engagement with complex input syntax. By facilitating broader access to electronic-structure simulations, GENIUS not only accelerates materials discovery but also supports reproducibility and adherence to FAIR data practices. Future enhancements could extend its capabilities to additional simulation codes and incorporate advanced validation techniques, further solidifying its role in democratizing computational materials engineering.

Methods

In this section, the authors describe the development of GENIUS, a framework designed to enhance the accessibility and efficiency of Quantum Espresso (QE)-based simulation methods in computational materials science. While QE serves as the primary focus, the framework is adaptable to various atomistic simulation codes, including molecular dynamics. GENIUS integrates large language models (LLMs) with a knowledge graph (KG) to create an intelligent interface that automates the processes of generating, validating, and debugging complex simulation protocols.

The architecture of GENIUS consists of three key components: a recommendation system, a protocol generation module, and an automated error handling system, which addresses two types of errors (denoted as error 1 and error 2). These components streamline the workflow from user input to the final protocol generation, emphasizing reproducibility, accuracy, and user adaptability in line with established scientific standards in the field. The authors also note that references to computational resources and model names are treated as common knowledge, reflecting the framework’s grounding in the relevant academic context.

Results

In this section, the authors present the results of testing the GENIUS framework across multiple large language models (LLMs) to evaluate its performance in generating valid input protocols for Density Functional Theory (DFT) calculations using Quantum ESPRESSO (QE). A dataset of 295 human-generated prompts was analyzed, revealing that 235 of these successfully produced valid simulation protocols, resulting in an overall success rate of approximately 79.7%. The prompts were categorized into basic (44.3%), standard (48.5%), and complex (7.2%) types, with the analysis indicating that prompt complexity does not inherently hinder the framework’s performance. The framework demonstrated a zero-shot success rate of 14.2%, where the initial output was valid without further corrections.

The authors employed a self-organizing map (SOM) to visualize the semantic landscape of the prompts, confirming a low topological error (TE) of 0.0373 and a quantization error of 0.4970, indicating effective clustering and representation of the input data. The results also highlighted the importance of the recommendation system, which significantly enhances the success probability of the workflow. The analysis revealed that the performance of GENIUS is largely attributed to its architectural design rather than solely the capabilities of the underlying models, as evidenced by the framework’s ability to handle various prompts effectively across different model attempts. Overall, the findings underscore the potential of the GENIUS framework in automating DFT simulations while providing insights into user interaction and prompt processing improvements.

Discussion

The GENIUS framework presents a three-tier architecture for automating quantum espresso (QE) simulation protocol generation, comprising a recommendation system, a protocol generation system, and an automated error handling system. The recommendation system gathers material-specific data and suggests simulation parameters, which are then utilized by the protocol generation system to create a simulation protocol. This protocol undergoes syntactic validation through the QE program, with an error handling module activated upon validation failure. The framework employs a finite-state machine (FSM) to manage component interactions, ensuring a structured workflow that separates reasoning from execution, thereby allowing for user control over key settings and facilitating a human-in-the-loop approach for complex calculations.

Central to GENIUS is a smart knowledge graph (KG) that organizes and connects 247 nodes and 330 edges of QE documentation, enhancing the retrieval of relevant information through keyword matching and context-aware methods. The integration of large language models (LLMs) aids in user interfacing, parameter evaluation, and error message processing, with a hierarchical model structure optimizing performance and cost. The automated error handling system significantly improves the recovery from simulation failures, achieving a success rate of over 76% for recoverable errors on initial retries. Overall, GENIUS effectively narrows the gap between advanced electronic-structure codes and user accessibility, promoting wider participation in materials discovery while ensuring reproducibility and supporting FAIR data practices. Future work may extend the KG to encompass additional QE modules and other simulation codes, enhancing the framework’s applicability across various domains.