التنفيذ الذاتي الروبوتي لمسارات الأدوات غير الخطية لجراحة العظام المتطابقة مع الهندسة في زراعة الأسنان الذاتية: دراسة في المختبر Autonomous robotic execution of nonlinear toolpaths for geometry-matched osteotomy in tooth autotransplantation: an in vitro study

شارك:
المجلة: International Journal of Oral Science، المجلد: 18، العدد: 1
DOI: https://doi.org/10.1038/s41368-026-00446-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42380089
تاريخ النشر: 2026-06-30
المؤلف: Chen Liu وآخرون
الموضوع الرئيسي: إصابات الأسنان وعلاجاتها

نظرة عامة

تناقش هذه الفقرة تطوير وتقييم نظام روبوتي متعدد المحاور مستقل مصمم لزراعة الأسنان الذاتية، مع التركيز بشكل خاص على إعداد تجاويف المستلم التي تتماشى مع شكل جذر المتبرع مع الحفاظ على العظام المحيطة. شملت الدراسة مقارنة بين النظام الروبوتي ودليل ثابت مدعوم بالأسنان التقليدي عبر أربعين نموذجًا mandibular مطبوع ثلاثي الأبعاد، والتي تضمنت كل من التشريح ذو الجذر الواحد والجذرين.

استخدم النظام الروبوتي مسارات طحن غير خطية تتوافق مع السطح، حيث تم تخطيط تجاويف المستلم عن طريق إزاحة سطح جذر المتبرع بمقدار 0.5 مم ومعالجة تحت السطح لمحاور الإدخال. أشارت النتائج إلى أن النهج الروبوتي قلل بشكل كبير من الأخطاء الموضعية العميقة وزاد من التوافق بين هندسة التجاويف المخطط لها والمعدة، خاصة في النماذج ذات الجذرين. بينما كانت مدة الإعداد الإجمالية مشابهة لكلا الطريقتين، تشير النتائج إلى أن النظام الروبوتي المستقل يمكن أن يحسن من دقة الهندسة ويقلل من إزالة العظام غير الضرورية في إجراءات الزراعة الذاتية، مما يستدعي مزيدًا من التحقق السريري.

مقدمة

تناقش مقدمة ورقة البحث زراعة الأسنان الذاتية (ATT) كعلاج قابل للتطبيق لاستبدال الأسنان المفقودة، مع تسليط الضوء على مزاياها مقارنةً بالترميمات الصناعية وزرع الأسنان. تحافظ زراعة الأسنان الذاتية على الرباط اللثوي الوظيفي، مما يمكّن من الإحساس الفسيولوجي وإعادة تشكيل العظام السنخية المستمرة، مع الإبلاغ عن معدلات بقاء طويلة الأمد تتجاوز 80% عند تلبية شروط الاختيار الجيد للحالات والظروف الجراحية. ومع ذلك، فإن النجاح السريري لزراعة الأسنان الذاتية يعتمد بشكل كبير على التقنية، وخاصة دقة إعداد تجاويف المستلم ومدة الوقت خارج السنخ، والتي تعتبر حاسمة لتحقيق الاستقرار الأولي والشفاء الأمثل.

تشير الورقة إلى أن التقنيات التقليدية الحرة لإعداد التجاويف محدودة بخبرة الجراح وغالبًا ما تؤدي إلى عدم الدقة التي يمكن أن تؤثر على نتائج العلاج. بينما تم إدخال تقنيات رقمية، مثل التصوير المقطعي المحوسب باستخدام شعاع المخروط والنماذج المطبوعة ثلاثية الأبعاد، لتعزيز التنبؤ، إلا أنها لا تزال تواجه تحديات في تكرار الأشكال الجذرية المعقدة. يتم اقتراح إدخال أنظمة الجراحة الروبوتية كحل لهذه القيود، خاصة في الإجراءات التي تتطلب حركات متعددة الدرجات من الحرية بشكل متحكم. تقدم هذه الدراسة أول تقييم لعملية قطع العظام الروبوتية المستقلة متعددة المحاور المصممة لإنشاء تجويف مستلم يتطابق هندسيًا مع جذر الأسنان المتبرع بها، مقارنةً بدقتها وكفاءتها مع نهج مدعوم بدليل ثابت باستخدام نماذج mandibular المطبوعة ثلاثية الأبعاد.

الطرق

تحدد فقرة “المواد والطرق” تصميم التجربة والإجراءات المستخدمة في الدراسة. توضح المواد المستخدمة، بما في ذلك الكواشف المحددة، والمعدات، وأي عينات بيولوجية معنية. يتم وصف المنهجية بشكل منهجي، تغطي إعداد العينات، والظروف التي أجريت فيها التجارب، والتقنيات المستخدمة لجمع البيانات وتحليلها.

تؤكد الفقرة أيضًا على الأساليب الإحصائية المطبقة لتفسير النتائج، مما يضمن أن تكون النتائج قوية وقابلة للتكرار. يتم تحديد المعلمات الرئيسية، مثل حجم العينة والضوابط، للتحقق من صحة النهج التجريبي. بشكل عام، توفر هذه الفقرة إطارًا شاملاً يدعم نتائج البحث، مما يسمح بالتقييم النقدي وتكرار الدراسة.

النتائج

تشير نتائج الدراسة إلى أن التحضيرات المدعومة بالروبوت تظهر دقة وكفاءة أفضل مقارنةً بالطرق المدعومة بالدليل الثابت. بشكل عام، كانت انحرافات المنصة مشابهة بين المجموعتين (0.79 مم ± 0.35 مم مقابل 0.78 مم ± 0.37 مم، P = 0.954). ومع ذلك، قلل الدعم الروبوتي بشكل كبير من انحراف القمة (0.94 مم ± 0.35 مم مقابل 1.96 مم ± 0.67 مم، P < 0.001)، خاصةً بالنسبة للأسنان ذات الجذرين (0.85 مم ± 0.37 مم مقابل 2.38 مم ± 0.54 مم، P < 0.001). كما أن انحراف الزاوية كان أيضًا لصالح الدعم الروبوتي (1.86° ± 1.04° مقابل 7.32° ± 3.21°، P < 0.001)، مع ملاحظات كبيرة في كل من الفئات الفرعية ذات الجذر الواحد والجذرين. دعمت مقاييس المطابقة السطحية فعالية المساعدة الروبوتية، حيث أظهرت انحرافًا أقل في الجذر المتوسط التربيعي (RMS) (0.20 مم ± 0.05 مم مقابل 0.33 مم ± 0.06 مم، P < 0.001)، ومعدل تشابه أعلى (88.00% ± 3.69% مقابل 63.31% ± 6.58%، P < 0.001)، ومعدل إزالة أقل بشكل كبير (7.89% ± 2.89% مقابل 95.99% ± 28.14%، P < 0.001). بينما لم تختلف مدة الإعداد بشكل كبير بشكل عام (759.38 ثانية ± 173.22 ثانية مقابل 832.82 ثانية ± 440.59 ثانية، P = 0.494)، كشفت التحليلات الفرعية عن أوقات أطول للتحضيرات ذات الجذر الواحد المدعومة بالروبوت (590.55 ثانية ± 1.63 ثانية مقابل 460.74 ثانية ± 50.91 ثانية، P < 0.001) وأوقات أقصر للتحضيرات ذات الجذرين (928.20 ثانية ± 1.54 ثانية مقابل 1,204.90 ثانية ± 315.55 ثانية، P < 0.01). أشار تحليل ANOVA ثنائي الاتجاه إلى تفاعلات كبيرة بين تقنية الإعداد وتعقيد التشريح لعدة مقاييس، مما يبرز الفوائد المعززة للمساعدة الروبوتية في السيناريوهات التشريحية الأكثر تعقيدًا.

المناقشة

تسلط فقرة المناقشة في هذه الدراسة الضوء على الفعالية المقارنة لعملية قطع العظام الروبوتية المستقلة مقابل قطع العظام المدعوم بالدليل الثابت لإعداد تجاويف المستلم في زراعة الأسنان الذاتية. حققت كلا الطريقتين دقة مماثلة في نقطة الدخول التاجية؛ ومع ذلك، عزز النهج الروبوتي بشكل كبير من دقة الموضع العميق و replicated بشكل أفضل شكل التجويف المخطط له دون تمديد وقت قطع العظام. وهذا يشير إلى أن الميزة الرئيسية للمساعدة الروبوتية تكمن في قدرتها على الحفاظ على الهندسة المقصودة طوال عمق الإعداد، وهو أمر حاسم لنجاح إجراءات الزراعة الذاتية، حيث يمكن أن تؤدي التباينات إلى استقرار أولي compromised وزيادة الصدمة.

تشدد الدراسة على أهمية شكل التجويف والمخاطر المرتبطة بالإعداد المفرط، خاصةً في السيناريوهات التشريحية المعقدة مثل الأسنان ذات الجذرين. تتيح قدرة النظام الروبوتي على تنفيذ مسارات أدوات متعددة المحاور غير الخطية بشكل مستمر التكيف بدقة أكبر مع الأشكال الجذرية غير المنتظمة، مما يقلل من إزالة العظام غير الضرورية ويعزز التنبؤ بالإجراءات. تدعو النتائج إلى دمج الأنظمة الروبوتية في سير العمل السريري، خاصةً للحالات الصعبة، بينما تدعو أيضًا إلى مزيد من التحقق السريري لتقييم قابلية التطبيق والكفاءة في العالم الحقيقي للتقنيات المدعومة بالروبوت في زراعة الأسنان الذاتية.

Journal: International Journal of Oral Science, Volume: 18, Issue: 1
DOI: https://doi.org/10.1038/s41368-026-00446-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42380089
Publication Date: 2026-06-30
Author(s): Chen Liu et al.
Primary Topic: Dental Trauma and Treatments

Overview

This section discusses the development and evaluation of an autonomous multi-axis robotic system designed for tooth autotransplantation, specifically focusing on the preparation of recipient sockets that align with donor root morphology while preserving surrounding bone. The study involved a comparison between the robotic system and a traditional static tooth-supported guide across forty 3D-printed mandibular models, which included both single-rooted and double-rooted anatomies.

The robotic system utilized nonlinear, surface-conforming milling trajectories, with recipient sockets planned by offsetting the donor root surface by 0.5 mm and addressing insertion axis undercuts. Results indicated that the robotic approach significantly reduced deep positional errors and enhanced the congruence between the planned and prepared socket geometries, particularly in double-rooted models. While the overall preparation time was similar for both methods, the findings suggest that the autonomous robotic system could improve geometric fidelity and minimize unnecessary bone removal in autotransplantation procedures, warranting further clinical validation.

Introduction

The introduction of the research paper discusses autotransplantation of teeth (ATT) as a viable treatment for replacing missing teeth, highlighting its advantages over prosthetic restorations and dental implants. ATT preserves the functional periodontal ligament, enabling physiological proprioception and ongoing alveolar bone remodeling, with reported long-term survival rates exceeding 80% when proper case selection and surgical conditions are met. However, the clinical success of ATT is highly dependent on technique, particularly the accuracy of recipient socket preparation and the duration of extra-alveolar time, which are critical for achieving primary stability and optimal healing.

The paper notes that conventional freehand techniques for socket preparation are limited by the surgeon’s experience and often lead to inaccuracies that can compromise treatment outcomes. While digital technologies, such as cone beam computed tomography and 3D-printed replicas, have been introduced to enhance predictability, they still face challenges in replicating complex root geometries. The introduction of robotic surgical systems is proposed as a solution to these limitations, particularly in procedures requiring controlled, multi-degree-of-freedom movements. This study presents the first evaluation of an autonomous, multi-axis robotic osteotomy designed to create a recipient socket that geometrically matches the donor tooth root, comparing its accuracy and efficiency against a static guide-assisted approach using 3D-printed mandibular models.

Methods

The “Materials and Methods” section outlines the experimental design and procedures employed in the study. It details the materials used, including specific reagents, equipment, and any biological samples involved. The methodology is described systematically, covering the preparation of samples, the conditions under which experiments were conducted, and the techniques utilized for data collection and analysis.

The section also emphasizes the statistical methods applied to interpret the results, ensuring that the findings are robust and reproducible. Key parameters, such as sample size and controls, are specified to validate the experimental approach. Overall, this section provides a comprehensive framework that underpins the research findings, allowing for critical assessment and replication of the study.

Results

The results of the study indicate that robot-assisted preparations demonstrate superior accuracy and efficiency compared to static guide-assisted methods. Overall, platform deviation was similar between the two groups (0.79 mm ± 0.35 mm vs 0.78 mm ± 0.37 mm, P = 0.954). However, robot assistance significantly reduced apex deviation (0.94 mm ± 0.35 mm vs 1.96 mm ± 0.67 mm, P < 0.001), particularly for double-rooted teeth (0.85 mm ± 0.37 mm vs 2.38 mm ± 0.54 mm, P < 0.001). Angular deviation also favored robot assistance (1.86° ± 1.04° vs 7.32° ± 3.21°, P < 0.001), with significant reductions noted in both single-rooted and double-rooted subgroups. Surface matching metrics further supported the efficacy of robotic assistance, showing lower root mean square (RMS) surface deviation (0.20 mm ± 0.05 mm vs 0.33 mm ± 0.06 mm, P < 0.001), higher Dice similarity (88.00% ± 3.69% vs 63.31% ± 6.58%, P < 0.001), and a significantly lower over-removal rate (7.89% ± 2.89% vs 95.99% ± 28.14%, P < 0.001). While preparation time did not differ significantly overall (759.38 s ± 173.22 s vs 832.82 s ± 440.59 s, P = 0.494), subgroup analysis revealed longer times for robot-assisted single-rooted preparations (590.55 s ± 1.63 s vs 460.74 s ± 50.91 s, P < 0.001) and shorter times for double-rooted preparations (928.20 s ± 1.54 s vs 1,204.90 s ± 315.55 s, P < 0.01). A two-way ANOVA indicated significant interactions between preparation technique and anatomical complexity for several metrics, highlighting the enhanced benefits of robotic assistance in more complex anatomical scenarios.

Discussion

The discussion section of this study highlights the comparative effectiveness of autonomous robotic osteotomy versus static guide-assisted osteotomy for recipient socket preparation in tooth autotransplantation. Both methods achieved similar coronal entry point accuracy; however, the robotic approach significantly enhanced deep positional accuracy and better replicated the planned socket morphology without extending the osteotomy time. This suggests that the primary advantage of robotic assistance lies in its ability to maintain the intended geometry throughout the preparation depth, which is crucial for the success of autotransplantation procedures, as discrepancies can lead to compromised primary stability and increased trauma.

The study emphasizes the importance of socket morphology and the risks associated with over-preparation, particularly in complex anatomical scenarios such as double-rooted teeth. The robotic system’s capability to execute continuous multi-axis, non-linear toolpaths allows for more precise adaptation to irregular root geometries, thereby minimizing unnecessary bone removal and enhancing procedural predictability. The findings advocate for the integration of robotic systems in clinical workflows, especially for challenging cases, while also calling for further clinical validation to assess the real-world applicability and efficiency of robotic-assisted techniques in tooth autotransplantation.