النمذجة المدفوعة بالبيانات وتوقع الحفاظ على مسار السفن في الأمواج الضحلة باستخدام تحليل الوضع الديناميكي من الدرجة العليا مع إدخال التحكم Data-driven modeling and prediction of ship course keeping in shallow water waves using higher order dynamic mode decomposition incorporating control input

شارك:
المجلة: Nonlinear Dynamics، المجلد: 114، العدد: 10
DOI: https://doi.org/10.1007/s11071-026-12669-4
تاريخ النشر: 2026-05-01
المؤلف: C J Chen وآخرون
الموضوع الرئيسي: تقليل النماذج والشبكات العصبية

نظرة عامة

تقدم ورقة البحث إطار عمل جديد قائم على البيانات، وهو تحليل الوضع الديناميكي من الدرجة العليا مع إدماج مدخلات التحكم (HODMD-CI)، يهدف إلى تحسين توقع حركات السفن للسفن السطحية المستقلة البحرية (MASS) في البيئات المعقدة. يوسع هذا الإطار HODMD التقليدي من خلال دمج مدخلات التحكم المؤجلة زمنياً، مثل زوايا الدفة وارتفاعات الموج، في نموذج توقع فضاء الحالة. تم إجراء التحقق من HODMD-CI باستخدام بيانات من حالة اختبار دويسبورغ (DTC) لحامل الحاويات، مما يظهر أداء توقع متفوق مقارنة بـ HODMD القياسي وموديلات الشبكات العصبية المختلفة. من الجدير بالذكر أن HODMD-CI حقق أعلى دقة وثبات في الاتجاه عندما تم استخدام كل من زاوية الدفة وارتفاع الموج، كما يتضح من أدنى قيمة للخطأ الجذري النسبي المتوسط (ARRMSE) وقيم معامل الارتباط بيرسون (PCC) الأقرب إلى 1.

تشير النتائج إلى أن دمج كل من مدخلات التشغيل والبيئة يعزز بشكل كبير دقة التوقع، خاصة للمتغيرات الحركية الحساسة للتحكم، مثل التمايل والدوران. تشير تحليل الحساسية إلى دقة توقع مثلى مع ترتيب إدماج تأخير الحالة المعتدل ($d_1$) بين 3 و 30 وترتيب إدماج تأخير التحكم ($d_2$) أقل من 3. علاوة على ذلك، أظهر HODMD-CI مقاومة أكبر للضوضاء في توقعات حركة الدوران مقارنة بموديلات الشبكات العصبية، وهو أمر حاسم بالنظر إلى الضوضاء الموجودة في زوايا الدوران المقاسة. بينما تستند استنتاجات الدراسة إلى سيناريو اختبار محدد، يؤكد المؤلفون على الحاجة إلى مزيد من التحقق عبر مجموعات بيانات متنوعة لتأسيس متانة وقابلية نقل إطار عمل HODMD-CI. ستستكشف الأبحاث المستقبلية تطبيقه في التحكم الذكي في حركة السفن ودمجه مع تحليل الوضع الديناميكي المدعوم بالفيزياء (PiDMD) لتعزيز التعميم والاتساق الفيزيائي.

مقدمة

تشير مقدمة السفن السطحية المستقلة البحرية (MASS) إلى تقدم كبير في النقل البحري، مما يعزز الكفاءة التشغيلية والسلامة مع تقليل التدخل البشري. تعمل المنظمة البحرية الدولية (IMO) بنشاط على تنظيمات للسفن السطحية المستقلة، مما يبرز الحاجة إلى توقع حركات السفن في الوقت الحقيقي لتسهيل الملاحة المستقلة. النماذج التقليدية القائمة على الفيزياء غير كافية للنمذجة عبر الإنترنت في البيئات المعقدة، مثل الأمواج والمياه الضحلة، مما يؤدي إلى ظهور طرق قائمة على البيانات كحل رئيسي لتوقع الحركة بدقة.

على الرغم من التقدم في تطبيق التقنيات القائمة على البيانات، لا تزال التحديات قائمة، خاصة في البيئات التي تتميز بكل من الأمواج والمياه الضحلة، حيث تظهر ديناميات السفن غير خطية وغير مستقرة بشكل قوي. استكشفت الدراسات الحالية طرقاً مختلفة قائمة على البيانات، بما في ذلك التعلم العميق وتحليل الوضع الديناميكي (DMD)، ولكن لا يوجد إطار موحد يعالج التأثيرات المجمعة لهذه العوامل البيئية. تقدم هذه الورقة إطار عمل جديد، وهو تحليل الوضع الديناميكي من الدرجة العليا مع إدماج مدخلات التحكم (HODMD-CI)، الذي يدمج مدخلات التحكم المؤجلة زمنياً في نموذج التوقع. يهدف الأسلوب إلى تعزيز دقة التوقع متعدد الخطوات لحركات الحفاظ على مسار السفن في ظل ظروف صعبة، تم التحقق منها من خلال تجارب مع نموذج حامل الحاويات في أمواج رأسية منتظمة. توضح الورقة المنهجية، ودراسة الحالة، وتحليل الحساسية، والنتائج المقارنة، مما يساهم في مجال الملاحة البحرية المستقلة.

طرق

في هذا القسم، يتم تفصيل المنهجية المستخدمة لمقارنة نتائج التوقع عبر نماذج مختلفة—HODMD-CI، BP، LSTM، وBi-LSTM. تعتبر طريقة HODMD-CI، التي تم تحديدها سابقاً على أنها تمتلك أعلى دقة شاملة في التوقع، بمثابة المعيار الذي يتم تقييم النماذج الأخرى بناءً عليه. تتضمن جميع النماذج زاوية الدفة وارتفاع الموج كمدخلات تحكم. تشير النتائج، الموضحة في الشكلين 8 و 9، إلى أنه بالنسبة للإحداثي السيني ($x$)، تظهر جميع الطرق توافقاً جيداً مع بيانات الاختبار بسبب انخفاض تعقيد الحركة المتوقعة.

بالنسبة للإحداثي الصادي ($y$)، تظهر HODMD-CI وBi-LSTM دقة توقع أعلى بكثير مقارنة بـ BP وLSTM عند استخدام مجموعة التدريب 1، وتظل HODMD-CI متفوقة مع مجموعة التدريب 2. تتماشى توقعات زاوية الاتجاه ($\psi$) من HODMD-CI بشكل وثيق مع بيانات الاختبار، بينما تظهر توقعات زاوية الدوران ($\phi$) من BP تقلبات غير منتظمة، مما يشير إلى مقاومة ضعيفة للضوضاء. على العكس، تلتقط الطرق الأخرى بشكل فعال تباين زاوية الدوران. من حيث زاوية الميل ($\theta$)، تتفوق HODMD-CI على النماذج الأخرى، التي تظهر تضعف في سعة الحركة وانحراف الطور. أخيراً، بالنسبة للإحداثي الزدوي ($z$)، تحافظ توقعات HODMD-CI على اتجاه ثابت مع بيانات الاختبار ولكن تظهر انحيازاً ثابتاً، حيث تتوقع باستمرار قيم أعلى من الملاحظ.

نتائج

في هذا القسم، يقدم المؤلفون نتائج التوقع لطريقة HODMD-CI، التي تتضمن مدخلات التحكم، ويقارنونها مع طريقة HODMD القياسية التي لا تتضمن ذلك. يستخدم التحليل معلمات فرط محسنة ويقيم دقة التوقع عبر متغيرات الحركة المختلفة باستخدام مجموعات التدريب 1 و 2. تشير النتائج، الموضحة في الشكلين 6 و 7، إلى أنه بينما تتماشى التوقعات للإحداثي السيني بشكل وثيق مع بيانات الاختبار بسبب ديناميات الحركة الأبسط، تظهر الإحداثيات الصادية وزاوية الاتجاه ψ دقة محسنة بشكل كبير مع طرق HODMD-CI (الدفة) وHODMD-CI (الدفة+الموج). يُعزى هذا التحسين إلى حساسية هذه المتغيرات لتغيرات زاوية الدفة، التي لا تؤخذ بعين الاعتبار في نماذج HODMD القياسية وHODMD-CI (الموج).

علاوة على ذلك، تسلط الدراسة الضوء على أن التوقعات لزاوية الدوران φ محدودة بواسطة نسبة إشارة إلى ضوضاء منخفضة، مما يؤدي إلى نتائج مماثلة عبر جميع الطرق. في المقابل، بالنسبة لزاوية الميل θ والإحداثي الزدوي z، التي تتأثر بارتفاع الموج، تظهر طرق HODMD-CI (الموج) وHODMD-CI (الدفة+الموج) دقة توقع متفوقة مقارنة بـ HODMD-CI (الدفة) وHODMD. في النهاية، تحقق طريقة HODMD-CI (الدفة+الموج)، التي تأخذ في الاعتبار كل من زاوية الدفة وارتفاع الموج، أعلى دقة توقع إجمالية.

مناقشة

يناقش القسم تطوير وتطبيق تحليل الوضع الديناميكي من الدرجة العليا مع إدماج مدخلات التحكم (HODMD-CI) لتوقع حركة السفن. بناءً على إطار HODMD التقليدي، يدمج HODMD-CI إدماج تأخير زمني إضافي لمدخلات التحكم، مما يسمح بنمذجة أكثر شمولاً لديناميات السفن. تتضمن المنهجية بناء مصفوفات لحظات الحالة والتحكم، وتطبيق تحليل القيم الفردية (SVD) لتقليل الأبعاد، وإقامة علاقة خطية لتوقع الحالات المستقبلية بناءً على حالات النظام الحالية ومدخلات التحكم. يتم تقييم الإطار من خلال دراسة حالة باستخدام مجموعة بيانات مرجعية من حامل الحاويات DTC، مع تحليل تكوينات مختلفة من مدخلات التحكم لتأثيرها على دقة التوقع.

تشير النتائج الرئيسية إلى أن HODMD-CI يتفوق باستمرار على HODMD القياسي، خاصة عندما يتم اعتبار كل من زاوية الدفة وارتفاع الموج كمدخلات تحكم، محققاً أعلى دقة توقع وثبات في الاتجاه. تشير تحليل الحساسية إلى ترتيبات إدماج مثلى لمدخلات الحالة والتحكم لتعزيز أداء التوقع. علاوة على ذلك، يظهر HODMD-CI مقاومة أفضل للضوضاء مقارنة بالنماذج القائمة على الشبكات العصبية، خاصة في توقع المتغيرات الحركية المزعجة مثل الدوران. يعترف المؤلفون بحدود دراستهم، مؤكدين على الحاجة إلى مزيد من التحقق عبر ظروف متنوعة وإمكانية التطبيقات المستقبلية في أنظمة التحكم في حركة السفن الذكية.

Journal: Nonlinear Dynamics, Volume: 114, Issue: 10
DOI: https://doi.org/10.1007/s11071-026-12669-4
Publication Date: 2026-05-01
Author(s): C J Chen et al.
Primary Topic: Model Reduction and Neural Networks

Overview

The research paper presents a novel data-driven modeling framework, Higher Order Dynamic Mode Decomposition incorporating Control Input (HODMD-CI), aimed at enhancing the prediction of ship motions for Maritime Autonomous Surface Ships (MASS) in complex environments. This framework extends the traditional HODMD by integrating time-delayed control inputs, such as rudder angles and wave elevations, into a state-space prediction model. Validation of HODMD-CI was conducted using data from the Duisburg Test Case (DTC) container carrier, demonstrating superior prediction performance compared to standard HODMD and various neural network models. Notably, HODMD-CI achieved the highest accuracy and trend consistency when both rudder angle and wave elevation were utilized, evidenced by the lowest Average Relative Root Mean Square Error (ARRMSE) and Pearson Correlation Coefficient (PCC) values closest to 1.

The findings indicate that the incorporation of both actuation and environmental inputs significantly enhances prediction accuracy, particularly for motion variables sensitive to control, such as sway and yaw. Sensitivity analysis suggests optimal prediction accuracy with a moderate state-delay embedding order ($d_1$) between 3 and 30 and a small control-delay embedding order ($d_2$) of less than 3. Furthermore, HODMD-CI exhibited greater noise resistance in roll motion predictions compared to neural network models, which is critical given the noise present in measured roll angles. While the study’s conclusions are based on a specific test scenario, the authors emphasize the need for further validation across diverse datasets to establish the robustness and transferability of the HODMD-CI framework. Future research will explore its application in intelligent ship motion control and integration with Physics-Informed Dynamic Mode Decomposition (PiDMD) to enhance generalization and physical consistency.

Introduction

The introduction of Maritime Autonomous Surface Ships (MASS) marks a significant advancement in marine transportation, enhancing operational efficiency and safety while minimizing human intervention. The International Maritime Organization (IMO) is actively working on regulations for MASS, emphasizing the need for real-time ship motion prediction to facilitate autonomous navigation. Traditional physics-based models are inadequate for online modeling in complex environments, such as waves and shallow waters, leading to the emergence of data-driven methods as the primary solution for accurate motion prediction.

Despite progress in applying data-driven techniques, challenges remain, particularly in environments characterized by both waves and shallow water, where ship dynamics exhibit strong nonlinearities and nonstationarity. Existing studies have explored various data-driven approaches, including Deep Learning and Dynamic Mode Decomposition (DMD), but a unified framework addressing the combined effects of these environmental factors is lacking. This paper introduces a novel framework, Higher Order Dynamic Mode Decomposition incorporating Control Input (HODMD-CI), which integrates time-delayed control inputs into the prediction model. The method aims to enhance multi-step prediction accuracy for ship course-keeping motions under challenging conditions, validated through experiments with a container carrier model in regular head waves. The paper outlines the methodology, case study, sensitivity analysis, and comparative results, ultimately contributing to the field of autonomous maritime navigation.

Methods

In this section, the methodology employed for comparing prediction results across various models—HODMD-CI, BP, LSTM, and Bi-LSTM—is detailed. The HODMD-CI method, previously identified as having the highest comprehensive prediction accuracy, serves as the benchmark against which the other models are evaluated. All models incorporate rudder angle and wave elevation as control inputs. The results, illustrated in Figures 8 and 9, indicate that for the x-coordinate ($x$), all methods demonstrate good agreement with the test data due to the low complexity of the predicted motion.

For the y-coordinate ($y$), HODMD-CI and Bi-LSTM show significantly higher prediction accuracy compared to BP and LSTM when using Training Set 1, and HODMD-CI remains superior with Training Set 2. The heading angle ($\psi$) predictions from HODMD-CI align closely with the test data, while the roll angle ($\phi$) predictions from BP exhibit irregular fluctuations, indicating poor noise resistance. Conversely, the other methods effectively capture the roll angle’s variation. In terms of pitch angle ($\theta$), HODMD-CI outperforms the other models, which show attenuation in motion amplitude and phase deviation. Lastly, for the z-coordinate ($z$), HODMD-CI predictions maintain a consistent trend with the test data but exhibit a constant bias, consistently predicting higher values than observed.

Results

In this section, the authors present the prediction results of the HODMD-CI method, which incorporates control inputs, and compare them with the standard HODMD method that does not. The analysis utilizes optimally-tuned hyperparameters and evaluates the prediction accuracy across different motion variables using Training Sets 1 and 2. The results, illustrated in Figures 6 and 7, indicate that while predictions for the x-coordinate align closely with test data due to its simpler motion dynamics, the y-coordinate and heading angle ψ show significantly improved accuracy with the HODMD-CI (rudder) and HODMD-CI (rudder+wave) methods. This enhancement is attributed to the sensitivity of these variables to rudder angle variations, which are not considered in the standard HODMD and HODMD-CI (wave) models.

Furthermore, the study highlights that predictions for the roll angle φ are limited by a low signal-to-noise ratio, resulting in similar outcomes across all methods. In contrast, for the pitch angle θ and z-coordinate z, which are influenced by wave elevation, the HODMD-CI (wave) and HODMD-CI (rudder+wave) methods demonstrate superior prediction accuracy compared to HODMD-CI (rudder) and HODMD. Ultimately, the HODMD-CI (rudder+wave) method, which accounts for both rudder angle and wave elevation, achieves the highest overall prediction accuracy.

Discussion

The section discusses the development and application of the Higher Order Dynamic Mode Decomposition with Control Input (HODMD-CI) for predicting ship motion. Building on the traditional HODMD framework, HODMD-CI incorporates an additional time-delay embedding for control inputs, allowing for a more comprehensive modeling of ship dynamics. The methodology involves constructing state and control snapshot matrices, applying Singular Value Decomposition (SVD) for dimensionality reduction, and establishing a linear relationship to predict future states based on current system states and control inputs. The framework is evaluated through a case study using a benchmark dataset from a DTC container carrier, with various configurations of control inputs analyzed for their impact on prediction accuracy.

Key findings indicate that HODMD-CI consistently outperforms standard HODMD, particularly when both rudder angle and wave elevation are considered as control inputs, achieving the highest prediction accuracy and trend consistency. Sensitivity analysis suggests optimal embedding orders for state and control inputs to enhance prediction performance. Furthermore, HODMD-CI demonstrates superior noise resistance compared to neural network-based models, particularly in predicting noisy motion variables like roll. The authors acknowledge the limitations of their study, emphasizing the need for further validation across diverse conditions and the potential for future applications in intelligent ship motion control systems.