DOI: https://doi.org/10.1055/s-0046-1816078
PMID: https://pubmed.ncbi.nlm.nih.gov/41638237
تاريخ النشر: 2026-02-04
المؤلف: Sara Wael Nour وآخرون
الموضوع الرئيسي: طب الأسنان الداخلي وعلاجات قنوات الجذر
نظرة عامة
في هذه الدراسة، تم تقييم تقنيات السد المختلفة بالتزامن مع مادة سد بيولوجية لتقييم كمية مادة التعبئة المتبقية بعد العلاج. على الرغم من عدم ملاحظة اختلافات ذات دلالة إحصائية بين التقنيات، إلا أن تقنية المخروط الواحد (SCT) أظهرت أعلى نسبة من المادة المتبقية، بينما أدت تقنية الموجة المستمرة (CLC) إلى أقل نسبة. بالإضافة إلى ذلك، تم تحديد اتجاه ثابت، مما يشير إلى أن المادة المتبقية زادت من الثلث التاجي إلى الثلث القمي، حيث كان الثلث القمي هو المنطقة الأكثر تحديًا للتنظيف.
تشير هذه النتائج إلى أن اختيار تقنية السد قد يلعب دورًا حاسمًا في إمكانية استرجاع المواد القائمة على البيوسيراميك، مما يبرز أهمية هذا الاعتبار أثناء تخطيط الحالة.
مقدمة
تناقش مقدمة ورقة البحث التعقيدات والتحديات المرتبطة بإعادة العلاج غير الجراحي لجذور الأسنان، والتي تعتبر الطريقة المحافظة الرئيسية لمعالجة فشل علاجات قنوات الجذور. الهدف الأساسي من إعادة العلاج هو القضاء على التلوث الميكروبي المستمر من خلال إزالة مواد التعبئة الموجودة بدقة، واستعادة النفاذية القمية، وحل أي تعقيدات تشريحية أو طبية. تتأثر فعالية هذه العملية بعوامل مختلفة، بما في ذلك المتغيرات المتعلقة بالأسنان (مثل شكل القناة وانحنائها) والجوانب المتعلقة بالتقنية (بما في ذلك تصميم الملفات وبروتوكولات الإزالة). كما أن نوع تقنية السد ومادة السد المستخدمة في العلاج الأولي تؤثر بشكل كبير على صعوبة إعادة العلاج، خاصة مع مواد السد البيولوجية المعروفة بعمق اختراقها في العاج والتصاقها القوي.
تسلط الورقة الضوء على استخدام تقنيات سد مختلفة، مثل الضغط الجانبي البارد (CLC)، والضغط العمودي الدافئ (WVC)، وتقنية المخروط الواحد (SCT)، مشيرة إلى أنه بينما يتكيف WVC بشكل أفضل مع عدم انتظام القناة، فإن SCT مفضل لبساطته، خاصة مع مواد السد البيولوجية. ومع ذلك، فإن خصائص هذه المواد تعقد إزالتها أثناء إعادة العلاج، مما يؤدي غالبًا إلى مستويات أعلى من مادة التعبئة المتبقية. كما تذكر المقدمة تقنيات وأدوات مختلفة لإزالة تعبئة قنوات الجذور، مع التأكيد على فعالية نظام ProTaper Universal Retreatment (PTUR)، الذي أظهر كفاءة محسنة مقارنة بالطرق اليدوية. على الرغم من التقدم، لم تحقق أي تقنية إزالة كاملة لمواد التعبئة، خاصة في المناطق التشريحية المعقدة. تهدف الدراسة إلى تقييم كمي لمادة التعبئة المتبقية بعد إعادة العلاج باستخدام نظام PTUR عبر تقنيات السد المختلفة، واختبار الفرضية الصفرية التي تفيد بعدم وجود اختلافات ذات دلالة إحصائية في كمية المادة المتبقية بين هذه التقنيات.
طرق
تحدد قسم “المواد والطرق” تصميم التجربة والإجراءات المستخدمة في الدراسة. يوضح المواد المحددة المستخدمة، بما في ذلك أي مواد كيميائية، ومعدات، وعينات بيولوجية، لضمان إمكانية تكرار التجارب. تشمل المنهجية البروتوكولات المتبعة لجمع البيانات، بما في ذلك أي تحليلات إحصائية تم إجراؤها لتفسير النتائج.
بالإضافة إلى ذلك، قد يصف القسم الظروف التجريبية، مثل درجة الحرارة، والمدة، وأي ضوابط تم تنفيذها للتحقق من النتائج. ويؤكد على أهمية هذه الطرق في تحقيق نتائج موثوقة ودقيقة، والتي تعتبر حاسمة للتحليل والنقاش اللاحق لنتائج البحث.
نتائج
توضح نتائج الدراسة من خلال صور مجهرية تمثيلية وتلخيصها في جداول وأشكال. تم تحليل المتوسط والانحراف المعياري (SD) لمناطق مادة التعبئة المتبقية (بـ mm²) عبر ثلاثة أثلاث تشريحية من قناة الجذر. أشار اختبار كروسكال-واليس إلى عدم وجود اختلافات ذات دلالة إحصائية في نسبة مادة التعبئة المتبقية بين ثلاث مجموعات السد (p = 0.0657). ومن الجدير بالذكر أن الثلث الأوسط أظهر أعلى تباين، مما يقترب من الدلالة (p = 0.0528).
داخل مجموعة SCT، كانت قيم المادة المتبقية متجانسة نسبيًا عبر جميع الأثلاث، مع عدم تأكيد وجود اختلافات داخل المجموعة بواسطة اختبار مان-ويتني U (p > 0.05). أظهرت مجموعة WVC نتائج متسقة، خاصة في الثلث القمي، بينما أظهرت مجموعة CLC اتجاهًا لزيادة المادة المتبقية من الثلث التاجي إلى الثلث القمي (التاجي < الأوسط < القمي)، على الرغم من أن هذه الاختلافات لم تكن ذات دلالة إحصائية (p > 0.05). بشكل عام، تراوحت نسبة منطقة قناة الجذر المغطاة بمادة التعبئة المتبقية من 62.66% إلى 86.31%، مع وجود مجموعة SCT بأعلى نسبة متوسطة (86.31 ± 14%) ومجموعة CLC بأدنى نسبة (62.66 ± 32%). على الرغم من هذه الاختلافات العددية، لم يتم العثور على اختلافات ذات دلالة إحصائية بين المجموعات، وتمت ملاحظة اتجاه عام لزيادة مادة التعبئة المتبقية من الثلث التاجي إلى الثلث القمي، على الرغم من عدم وجود دلالة إحصائية.
نقاش
يتناول قسم النقاش في الدراسة التحديات المرتبطة بالإزالة الكاملة لمادة تعبئة قنوات الجذور أثناء إعادة العلاج، مع التأكيد على تأثير عوامل مثل تشريح قناة الجذر، وتقنيات السد، والخصائص الفيزيائية والكيميائية للمواد السد. قامت الدراسة بتقييم مادة التعبئة المتبقية بعد إعادة علاج القنوات المملوءة بمادة سد بيولوجية باستخدام ثلاث تقنيات سد: تقنية المخروط الواحد (SCT)، الضغط العمودي الدافئ (WVC)، والضغط الموجي المستمر (CLC). على الرغم من عدم ملاحظة اختلافات ذات دلالة إحصائية بين المجموعات، إلا أن اتجاهًا أشار إلى أن SCT أسفرت عن أعلى نسبة من المادة المتبقية، بينما أسفرت CLC عن الأقل. تراوحت نسب التعبئة المتبقية من 62.66% إلى 86.31%، مع إظهار الثلث القمي باستمرار أكبر التحديات في التنظيف.
تتوافق النتائج مع الأدبيات السابقة، مما يشير إلى أنه لا توجد تقنية حالية تضمن الإزالة الكاملة لمواد التعبئة، خاصة في أنظمة القنوات المعقدة. تسلط الدراسة الضوء على النشاط الحيوي لمواد السد القائمة على السيليكات الكالسيومية، والتي يمكن أن تعزز الالتصاق بالعاج وتزيد من تعقيد إعادة العلاج. قد تؤثر القيود، مثل حجم العينة الصغيرة وغياب ظروف سريرية محاكاة، على قابلية تعميم النتائج. يُوصى بإجراء أبحاث مستقبلية باستخدام تقنيات تصوير متقدمة مثل التصوير المقطعي المحوسب الدقيق لتحسين فهم المواد المتبقية وتعزيز فهم إمكانية استرجاع مواد السد البيولوجية. بشكل عام، تؤكد النتائج على أهمية اختيار تقنيات السد المناسبة، حيث قد تواجه SCT تحديات أكبر أثناء إعادة العلاج، مما يتطلب استراتيجيات إضافية لتعزيز فعالية التنظيف.
DOI: https://doi.org/10.1055/s-0046-1816078
PMID: https://pubmed.ncbi.nlm.nih.gov/41638237
Publication Date: 2026-02-04
Author(s): Sara Wael Nour et al.
Primary Topic: Endodontics and Root Canal Treatments
Overview
In this study, various obturation techniques were evaluated in conjunction with a bioceramic sealer to assess the amount of residual filling material remaining after treatment. Although no statistically significant differences were observed among the techniques, the Single Cone Technique (SCT) exhibited the highest percentage of residual material, while the Continuous Wave Technique (CLC) resulted in the least. Additionally, a consistent trend was identified, indicating that residual material increased from the coronal to the apical thirds, with the apical third proving to be the most challenging area to clean.
These findings imply that the selection of obturation technique may play a crucial role in the retrievability of bioceramic-based materials, highlighting the importance of this consideration during case planning.
Introduction
The introduction of the research paper discusses the complexities and challenges associated with nonsurgical endodontic retreatment, which is the primary conservative method for addressing failed root canal treatments. The primary goal of retreatment is to eliminate persistent microbial contamination by thoroughly removing existing root filling materials, regaining apical patency, and resolving any anatomical or iatrogenic complications. The effectiveness of this process is influenced by various factors, including tooth-related variables (such as canal morphology and curvature) and technique-related aspects (including file design and removal protocols). The type of obturation technique and sealer material used in the initial treatment also significantly impacts the difficulty of retreatment, particularly with bioceramic sealers known for their deep dentinal penetration and strong adhesion.
The paper highlights the use of different obturation techniques, such as cold lateral compaction (CLC), warm vertical compaction (WVC), and the single-cone technique (SCT), noting that while WVC adapts better to canal irregularities, SCT is favored for its simplicity, especially with bioceramic sealers. However, the properties of these sealers complicate their removal during retreatment, often resulting in higher levels of residual filling material. The introduction also mentions various techniques and instruments for root canal filling removal, emphasizing the effectiveness of the ProTaper Universal Retreatment (PTUR) system, which has shown improved efficiency compared to manual methods. Despite advancements, no technique has achieved complete removal of filling materials, particularly in complex anatomical regions. The study aims to quantitatively assess the residual filling material after retreatment using the PTUR system across different obturation techniques, testing the null hypothesis that no significant differences exist in the quantity of residual material among these techniques.
Methods
The “Materials and Methods” section outlines the experimental design and procedures employed in the study. It details the specific materials used, including any reagents, equipment, and biological samples, ensuring reproducibility of the experiments. The methodology encompasses the protocols followed for data collection, including any statistical analyses performed to interpret the results.
Additionally, the section may describe the experimental conditions, such as temperature, duration, and any controls implemented to validate the findings. It emphasizes the importance of these methods in achieving reliable and accurate outcomes, which are critical for the subsequent analysis and discussion of the research results.
Results
The results of the study are illustrated through representative stereomicroscopic images and summarized in tables and figures. The mean and standard deviation (SD) of residual filling material areas (in mm²) across three anatomical thirds of the root canal were analyzed. The Kruskal-Wallis test indicated no statistically significant differences in the percentage of remaining filling material among the three obturation groups (p = 0.0657). Notably, the middle third exhibited the highest variability, approaching significance (p = 0.0528).
Within the SCT group, residual material values were relatively uniform across all thirds, with no significant intragroup differences confirmed by the Mann-Whitney U-test (p > 0.05). The WVC group showed consistent results, particularly in the apical third, while the CLC group demonstrated a trend of increasing residual material from the coronal to the apical third (coronal < middle < apical), although these differences were not statistically significant (p > 0.05). Overall, the percentage of root canal area covered by residual filling material ranged from 62.66% to 86.31%, with the SCT group having the highest mean percentage (86.31 ± 14%) and the CLC group the lowest (62.66 ± 32%). Despite these numerical variations, no statistically significant differences were found among the groups, and a general trend of increasing residual filling material from the coronal to the apical third was observed, albeit without statistical significance.
Discussion
The discussion section of the study addresses the challenges associated with the complete removal of root canal filling material during retreatment, emphasizing the influence of factors such as root canal anatomy, obturation techniques, and the physicochemical properties of sealers. The study evaluated residual filling material after retreatment of canals filled with a bioceramic sealer using three obturation techniques: Single Cone Technique (SCT), Warm Vertical Compaction (WVC), and Continuous Wave Compaction (CLC). Although no statistically significant differences were observed among the groups, a trend indicated that SCT resulted in the highest percentage of residual material, while CLC yielded the least. Residual filling percentages ranged from 62.66% to 86.31%, with the apical third consistently showing the most significant challenges in cleaning.
The findings align with previous literature, suggesting that no current technique guarantees complete removal of filling materials, particularly in complex canal systems. The study highlights the bioactivity of calcium silicate sealers, which can enhance bonding to dentin and complicate retreatment. Limitations, such as the small sample size and the lack of simulated clinical conditions, may affect the generalizability of the results. Future research utilizing advanced imaging techniques like micro-computed tomography is recommended to better characterize residual materials and improve understanding of the retrievability of bioceramic sealers. Overall, the results underscore the importance of selecting appropriate obturation techniques, as SCT may pose greater challenges during retreatment, necessitating additional strategies to enhance cleaning efficacy.
