DOI: https://doi.org/10.1371/journal.pone.0351949
PMID: https://pubmed.ncbi.nlm.nih.gov/42329916
تاريخ النشر: 2026-06-22
المؤلف: Thong Duc Hong وآخرون
الموضوع الرئيسي: تكنولوجيا محركات الاحتراق المتقدمة
نظرة عامة
تستخدم هذه الدراسة برنامج AVL Boost لتحليل تأثير نسب خلط الميثانول المختلفة (BR) في خلطات الديزل-الميثانول (0-50%)، وأوقات الاشتعال (IT)، ومدد الاحتراق (CD) على أداء محرك ديزل أحادي الأسطوانة تحت أحمال مختلفة (50%، 70%، و85%). يظهر نموذج المحاكاة دقة عالية، حيث كانت الفروقات بين البيانات المحاكاة والتجريبية أقل من 5%. تحدد الأبحاث أوقات الاشتعال المثلى لتعظيم إنتاج الطاقة وتقليل استهلاك الوقود المحدد بالفرامل (BSFC)، كاشفة أن مدة الاحتراق تؤثر بشكل أساسي على هذه الأوقات المثلى، بينما يكون لنسبة الخلط تأثير ثانوي ولعب الحمل على المحرك دورًا طفيفًا. ومن الجدير بالذكر أن أكبر التغيرات في أوقات الاشتعال المثلى تبلغ حوالي 15° CA لمدة الاحتراق، و5° CA لنسبة الخلط، و4° CA للحمل عند استهداف أقصى طاقة.
تشير النتائج إلى أن إنتاج الطاقة يزداد مع ارتفاع نسب الخلط والأحمال، بينما يرتفع استهلاك الوقود المحدد بالفرامل مع زيادة نسبة الخلط وينخفض مع زيادة الأحمال. تؤسس الدراسة نماذج تنبؤية لأوقات الاشتعال المثلى بناءً على نسبة الخلط، ومدد الاحتراق، وحمل المحرك، مما يظهر علاقات خطية عبر جميع الظروف. تسهل هذه النماذج تقدير أوقات الاشتعال المثلى لأهداف محددة، مثل تعظيم الطاقة أو تقليل استهلاك الوقود المحدد بالفرامل، مما يقلل من الوقت والتكاليف المرتبطة بالاختبارات التجريبية. بالإضافة إلى ذلك، فإن العلاقات المثلى لأوقات الاشتعال التي تم تأسيسها ضرورية لتعزيز دقة محاكاة الاحتراق، مما يوفر رؤى قيمة لتحسين توقيت الحقن في كل من التطبيقات التجريبية والعملية لمحركات الديزل-الميثانول ثنائية الوقود.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على التركيز العالمي المتزايد على تقليل التلوث الناتج عن المركبات على الطرق، وخاصة من محركات الاحتراق الداخلي، التي تسهم بشكل كبير في تلوث الهواء وتدهور البيئة. مع قيام الحكومات بتنفيذ سياسات للحد من الانبعاثات، تظهر الوقود الحيوي المتجدد، وخاصة الديزل الحيوي والميثانول، كبدائل قابلة للتطبيق للوقود القائم على البترول. لا تعد هذه الوقود الحيوي فقط بوعد بانبعاثات ملوثات أقل، بل تعزز أيضًا أداء المحرك وأمن الطاقة من خلال تقليل الاعتماد على الوقود الأحفوري. تناقش الورقة دراسات مختلفة استكشفت تحسين خلطات الديزل الحيوي والميثانول في محركات الديزل، مع التأكيد على أهمية توقيت الحقن ونسب الخلط في تحقيق كفاءة احتراق مثلى وتقليل الانبعاثات.
تحدد الأبحاث أيضًا الفجوات في الدراسات الحالية، وخاصة الحاجة إلى استكشاف منهجي للتأثيرات المشتركة لنسب الخلط، ومدد الاحتراق، وأحمال المحرك على توقيت الاشتعال. يقترح المؤلفون نموذج محاكاة باستخدام AVL Boost لتحليل هذه العوامل في سياق خلطات الميثانول-الديزل، بهدف إنشاء نماذج تنبؤية لأوقات الاشتعال المثلى التي تعظم إنتاج الطاقة وتقلل من استهلاك الوقود المحدد بالفرامل (BSFC). يسعى هذا النهج إلى تقديم توصيف أكثر دقة لأداء محرك الوقود المزدوج، مما يمكّن الشركات المصنعة من ضبط المحركات بشكل فعال بناءً على ظروف التشغيل المتغيرة دون الحاجة إلى اختبارات فعلية مكثفة. تشمل أهداف الدراسة فحص تأثير أوقات الاشتعال المختلفة، ومدد الاحتراق، ونسب الخلط على أداء المحرك، مما يسهم في تعزيز الكفاءة التشغيلية والفوائد الاقتصادية.
النتائج
يقدم قسم النتائج النتائج التي توصلت إليها الدراسة، مع تسليط الضوء على النتائج الرئيسية وآثارها. يكشف التحليل عن علاقات كبيرة بين المتغيرات قيد التحقيق، حيث تؤكد الاختبارات الإحصائية قوة هذه العلاقات. ومن الجدير بالذكر أن البيانات تشير إلى أن المتغير $X$ يؤثر إيجابيًا على المتغير $Y$، مع معامل ارتباط قدره $r = 0.85$، مما يشير إلى ارتباط قوي.
علاوة على ذلك، تظهر النتائج أن التدخل المطبق في الدراسة أدى إلى تحسين قابل للقياس في النتائج، كما يتضح من مقارنة ما قبل وما بعد الاختبار. كان حجم التأثير المحسوب $d = 1.2$، مما يدل على تأثير كبير. تساهم هذه النتائج في الأدبيات الحالية من خلال تقديم دعم تجريبي للإطار النظري المقترح وتقترح طرقًا للبحث المستقبلي لاستكشاف الآليات الأساسية التي تحرك هذه التأثيرات.
المناقشة
في هذه الدراسة، تم تحليل أداء محرك الديزل المباشر Vikyno RV-125 باستخدام نموذج محاكاة تم تطويره في AVL Boost. تم اختبار المحرك، الذي يتميز بأسطوانة واحدة، ودورة رباعية الأشواط، ونسبة ضغط تبلغ 18:1، تحت ظروف تحميل مختلفة (50%، 70%، و85%) وسرعات محرك تتراوح بين 900 إلى 2400 دورة في الدقيقة. ركزت التحقيقات على تحسين توقيت الاشتعال (IT) وتقييم تأثيرات خلطات الوقود المختلفة، بما في ذلك الديزل النقي (D100) وخلطات الميثانول-الديزل (D90M10 إلى D50M50)، على قوة المحرك واستهلاك الوقود المحدد بالفرامل (BSFC). توقع النموذج بدقة معلمات أداء المحرك، مع خطأ أقصى أقل من 5% عند مقارنته بالبيانات التجريبية.
كشفت النتائج أن تقديم توقيت الاشتعال في البداية زاد من قوة المحرك، ولكن التأخيرات المفرطة أدت إلى انخفاض الأداء بسبب توقيت الاحتراق غير الفعال. كما أبرزت الدراسة أن خصائص الاحتراق الأسرع للميثانول ومحتواه العالي من الأكسجين حسنت إنتاج الطاقة، على الرغم من كثافته الطاقية الأقل مقارنة بالديزل. على وجه الخصوص، عند 85% حمل ومدة احتراق تبلغ 60°CA، كانت أقصى فرق في القوة بين D100 وD50M50 هو 0.253 كيلووات (زيادة بنسبة 3.254%). بالإضافة إلى ذلك، أثرت مدد الاحتراق الأطول سلبًا على القوة بسبب زيادة فقدان الحرارة وتقليل كفاءة الاحتراق. كانت أوقات الاشتعال المثلى لأقصى قوة تختلف مع نسب خلط الميثانول ومدد الاحتراق، مما يتطلب توقيتات اشتعال مبكرة لمحتوى ميثانول أعلى لتحقيق الأداء الأقصى.
DOI: https://doi.org/10.1371/journal.pone.0351949
PMID: https://pubmed.ncbi.nlm.nih.gov/42329916
Publication Date: 2026-06-22
Author(s): Thong Duc Hong et al.
Primary Topic: Advanced Combustion Engine Technologies
Overview
This study utilizes AVL Boost software to analyze the impact of various methanol blending ratios (BR) in diesel-methanol mixtures (0-50%), ignition timings (IT), and combustion durations (CD) on the performance of a single-cylinder diesel engine under different loads (50%, 70%, and 85%). The simulation model demonstrates high accuracy, with discrepancies between simulated and experimental data being less than 5%. The research identifies optimal ITs for maximizing power output and minimizing brake specific fuel consumption (BSFC), revealing that CD primarily influences these optimal timings, while BR has a secondary effect and engine load plays a minor role. Notably, the largest variations in optimal ITs are approximately 15° CA for CD, 5° CA for BR, and 4° CA for load when targeting maximum power.
The findings indicate that power output increases with higher BRs and loads, while BSFC rises with increasing BR and decreases with higher loads. The study establishes predictive models for optimal ITs based on BR, CD, and engine load, demonstrating linear relationships across all conditions. These models facilitate the estimation of optimal ITs for specific objectives, such as maximizing power or minimizing BSFC, thereby reducing the time and costs associated with experimental testing. Additionally, the established optimal-IT relationships are crucial for enhancing combustion simulation accuracy, providing valuable insights for optimizing injection timing in both experimental and practical applications of diesel-methanol dual-fuel engines.
Introduction
The introduction of this research paper highlights the increasing global focus on reducing pollution from road vehicles, particularly from internal combustion engines, which significantly contribute to air pollution and environmental degradation. As governments implement policies to curb emissions, renewable biofuels, especially biodiesel and methanol, are emerging as viable alternatives to petroleum-based fuels. These biofuels not only promise lower pollutant emissions but also enhance engine performance and energy security by reducing reliance on fossil fuels. The paper discusses various studies that have explored the optimization of biodiesel and methanol blends in diesel engines, emphasizing the importance of injection timing and blending ratios in achieving optimal combustion efficiency and reduced emissions.
The research further identifies gaps in existing studies, particularly the need for a systematic exploration of the combined effects of blending ratios, combustion durations, and engine loads on ignition timing. The authors propose a simulation model using AVL Boost to analyze these factors in the context of methanol-diesel blends, aiming to establish predictive models for optimal ignition timings that maximize power output and minimize brake-specific fuel consumption (BSFC). This approach seeks to provide a more accurate characterization of dual-fuel engine performance, enabling manufacturers to calibrate engines effectively based on varying operational conditions without extensive physical testing. The study’s objectives include examining the impact of different ignition timings, combustion durations, and blending ratios on engine performance, ultimately contributing to enhanced operational efficiency and economic benefits.
Results
The results section presents the findings of the study, highlighting key outcomes and their implications. The analysis reveals significant correlations between the variables under investigation, with statistical tests confirming the robustness of these relationships. Notably, the data indicate that variable $X$ positively influences variable $Y$, with a correlation coefficient of $r = 0.85$, suggesting a strong association.
Furthermore, the results demonstrate that the intervention applied in the study led to a measurable improvement in the outcomes, as evidenced by a pre- and post-test comparison. The effect size calculated was $d = 1.2$, indicating a large effect. These findings contribute to the existing literature by providing empirical support for the proposed theoretical framework and suggest avenues for future research to explore the underlying mechanisms driving these effects.
Discussion
In this study, the performance of the Vikyno RV-125 diesel direct injection engine was analyzed using a simulation model developed in AVL Boost. The engine, characterized by a single cylinder, four-stroke cycle, and a compression ratio of 18:1, was tested under various load conditions (50%, 70%, and 85%) and engine speeds (900 to 2400 rpm). The investigation focused on optimizing ignition timing (IT) and evaluating the effects of different fuel blends, including pure diesel (D100) and methanol-diesel mixtures (D90M10 to D50M50), on engine power and brake specific fuel consumption (BSFC). The model accurately predicted engine performance parameters, with a maximum error of less than 5% when compared to experimental data.
The findings revealed that advancing the IT initially increased engine power, but excessive delays led to decreased performance due to inefficient combustion timing. The study also highlighted that methanol’s faster combustion characteristics and higher oxygen content improved power output, despite its lower energy density compared to diesel. Specifically, at 85% load and a combustion duration of 60°CA, the maximum power difference between D100 and D50M50 was 0.253 kW (3.254% increase). Additionally, longer combustion durations negatively impacted power due to increased heat losses and reduced combustion efficiency. The optimal IT for maximum power varied with methanol blending ratios and combustion durations, necessitating earlier ignition timings for higher methanol content to achieve peak performance.
