DOI: https://doi.org/10.62760/iteecs.5.1.2026.173
تاريخ النشر: 2026-03-17
المؤلف: Neelima Kalahasthi وآخرون
الموضوع الرئيسي: التكنولوجيا المساعدة في التواصل والتنقل
نظرة عامة
تقدم هذه الورقة تصميم وتطوير نظام تحكم في كرسي متحرك ذكي مزود بتقنية البلوتوث يهدف إلى تعزيز التنقل والسلامة للمستخدمين. يسمح النظام بالتشغيل عبر تطبيق على الهاتف الذكي ويشمل مستشعرات فوق صوتية للكشف عن العقبات، محققًا معدل دقة يبلغ 90% في الاختبارات. تم بناء الأجهزة حول لوحة Arduino Uno، ووحدة بلوتوث HC-05، ووحدة تحكم المحرك L298N، ومستشعر فوق صوتي HC-SR04. يعمل الكرسي المتحرك باستهلاك طاقة يبلغ 25 واط، مما يوفر حوالي 28 دقيقة من وقت التشغيل على بطارية 12 فولت، 1 أمبير ساعة.
يظهر نظام الكرسي المتحرك الذكي المقترح مزايا كبيرة مقارنة بالتقنيات الحالية، مثل أنظمة التحكم الصوتي وأنظمة EMG، من خلال كونه أكثر كفاءة في استهلاك الطاقة بنسبة 25% ويقدم زيادة بنسبة 30% في وقت التشغيل. تسهل هيكليته المودولارية دمج التطورات المستقبلية، بما في ذلك قدرات إنترنت الأشياء (IoT) والذكاء الاصطناعي (AI) للتنقل. بشكل عام، تسهم هذه الأبحاث في تقديم إطار عمل قابل للتكرار وفعال من حيث الطاقة لتطوير تقنيات الكراسي المتحركة الذكية منخفضة التكلفة، مما يعزز إمكانية الوصول وسلامة المستخدمين.
مقدمة
تسلط المقدمة الضوء على الدور الحاسم للتنقل في تعزيز استقلالية الأفراد وجودة حياتهم. على الرغم من فائدة الكراسي المتحركة التقليدية المدفوعة، إلا أن تكلفتها العالية وتعقيدها يحدان من إمكانية الوصول، خاصة في البلدان النامية، حيث تقدر منظمة الصحة العالمية (WHO) أن أكثر من 75 مليون فرد يحتاجون إلى كراسي متحركة، ومع ذلك، فإن أقل من 20% يمكنهم تحمل تكلفتها.
ظهرت تقدمات حديثة في أنظمة التحكم، مثل تقنيات التحكم الصوتي والإيمائي وأنظمة EMG؛ ومع ذلك، غالبًا ما تعتمد هذه الأنظمة على مستشعرات باهظة الثمن، وتتطلب معايرة واسعة، وتفتقر إلى ميزات السلامة الأساسية مثل الكشف عن العقبات في الوقت الحقيقي. لمعالجة هذه التحديات، تقترح الورقة كرسيًا متحركًا ذكيًا منخفض التكلفة مزودًا بتقنية البلوتوث ومجهز بمستشعرات فوق صوتية، بهدف تحسين إمكانية الوصول والسلامة للمستخدمين.
الطرق
تشمل منهجية نظام الكرسي المتحرك الذكي خمسة وحدات متكاملة: وحدة تحكم تستخدم لوحة Arduino Uno لاتخاذ القرارات في الوقت الحقيقي وتوليد إشارات PWM؛ وحدة اتصالات مزودة بوحدة بلوتوث HC-05 للتحكم عبر الهاتف الذكي؛ وحدة تشغيل تحتوي على محرك L298N لإدارة محركين DC بجهد 12 فولت، 30 دورة في الدقيقة للحركة ثنائية الاتجاه؛ وحدة استشعار تستخدم مستشعرًا فوق صوتيًا للكشف عن العقبات حتى 4 أمتار؛ ووحدة طاقة تتكون من بطارية ليثيوم أيون 12 فولت، 1 أمبير ساعة. يسهل تصميم النظام نقل البيانات بشكل مستقر بين الهاتف الذكي ووحدة البلوتوث، مما يقلل من تعقيد الأسلاك. يسمح تطبيق وحدة التحكم بالبلوتوث بخمس أوامر أساسية، ويضمن المستشعر فوق الصوتي السلامة من خلال إيقاف الكرسي المتحرك تلقائيًا عند اكتشاف عقبة ضمن 20 سم.
تشمل الإعدادات التجريبية نموذجًا أوليًا للكرسي المتحرك يقيس 50 × 40 سم، تم بناؤه من الخشب الرقائقي ومجهز بمستشعرات فوق صوتية HC-SR04 المعايرة والمائلة بزاوية 15° لتحسين الكشف عن الأرض. تضمنت المعايرة قياس المسافات من 10 سم إلى 50 سم، وكشفت عن خطأ قياس قدره ±1 سم وانحراف قدره 5 سم ضمن نطاق 10-80 سم. تم إجراء الاختبارات في بيئة مختبرية محكومة، مع تكرار كل تجربة خمس مرات لتقليل التحيز وتعزيز الموثوقية. تدعم الأسلاك المنظمة للنظام أداءً مستقرًا وتبسط الصيانة، مما يسهم في الفعالية العامة لنموذج الكرسي المتحرك الذكي.
النتائج
تشير نتائج الدراسة إلى تحسينات كبيرة في الكشف عن العقبات وكفاءة الطاقة مقارنة بالأنظمة الحالية. كما هو موضح في الجدول 3، حقق النظام دقة في الكشف عن العقبات تبلغ 90%، مما يمثل تحسينًا بنسبة 10% مقارنة بالنتائج المرجعية [22]. تم تسجيل السرعة الخطية عند 0.157 م/ث، بينما تم تحديد نطاق الكشف عند 4 أمتار. ومن الجدير بالذكر أن استهلاك الطاقة تم قياسه عند 25.2 واط، مما يعكس انخفاضًا بنسبة 25% مقارنة بالمرجع [21].
علاوة على ذلك، تم حساب وقت تشغيل البطارية ليكون حوالي 28 دقيقة، وهو زيادة بنسبة 30% عن وقت التشغيل المبلغ عنه في المرجع [21]. يتم التعبير عن الطاقة المستهلكة من قبل النظام بالمعادلة \( P = V \times I \)، ويتم إعطاء وقت تشغيل النظام المقدر بواسطة \( T = \frac{V \times A_{h} \times 60}{P} \)، حيث يتم ضبط الجهد عند 12 فولت والأمبير ساعة عند 1، مما يؤكد وقت التشغيل المبلغ عنه. بشكل عام، تؤكد هذه النتائج على تحسينات أداء النظام من حيث دقة الكشف وكفاءة الطاقة.
المناقشة
تحدد قسم المناقشة في ورقة البحث الدافع وراء تطوير نظام تحكم موحد، ميسور التكلفة، وذكي للكرسي المتحرك الذي يعالج القيود الحالية في حلول التنقل الذكي، مثل عدم كفاية ردود الفعل عن العقبات في الوقت الحقيقي، والتكاليف العالية، ونقص المودولارية لدمج إنترنت الأشياء والذكاء الاصطناعي. تشمل الأهداف الرئيسية تصميم كرسي متحرك يعتمد على البلوتوث وArduino مع الكشف المدمج عن العقبات، وتقييم أدائه من حيث السرعة والطاقة والدقة، وتأسيس منصة مودولارية للتعزيزات المستقبلية. تشمل المساهمات الرئيسية للدراسة نظامًا مدمجًا منخفض التكلفة يجمع بين التحكم بالبلوتوث والكشف عن العقبات فوق الصوتية، مما يظهر انخفاضًا بنسبة 25% في استهلاك الطاقة وزيادة بنسبة 30% في وقت التشغيل مقارنة بأنظمة التحكم الحالية.
تستعرض الورقة أيضًا الأعمال ذات الصلة، مسلطة الضوء على تطور أنظمة التحكم في الكراسي المتحركة من المنصات اليدوية إلى شبه المستقلة، وتحدد الفجوات في الأبحاث الحالية، وخاصة الحاجة إلى أنظمة توازن بين التعقيد والقدرة على تحمل التكاليف. تدير خوارزمية التحكم في الكرسي المتحرك المقترح الحركة بناءً على مدخلات البلوتوث وردود الفعل فوق الصوتية، مما يضمن السلامة من خلال إيقاف الحركة عند اكتشاف العقبات ضمن نطاق حرج. تشير تحليلات الأداء إلى أن النموذج الأولي يحقق معدل نجاح يبلغ 90% في الكشف عن العقبات، مع تشغيل مستقر في بيئات متنوعة. تشير النتائج إلى أن التصميم المقترح لا يلبي فقط الاحتياجات العملية للمستخدمين ولكنه أيضًا يضع الأساس للتطورات المستقبلية في تقنيات التنقل المساعدة، بما في ذلك التوسع المحتمل في وظائف إنترنت الأشياء والذكاء الاصطناعي.
القيود
تشمل قيود النظام الحالي القيود الجوهرية لتواصل البلوتوث، الذي يعمل عادةً بشكل فعال ضمن نطاق يبلغ حوالي 10 أمتار. قد تتضمن التكرارات المستقبلية دمج Wi-Fi أو ZigBee لتعزيز الاتصال. بالإضافة إلى ذلك، فإن أداء الكشف يتعرض للخطر على الأسطح العاكسة أو ذات الملمس الناعم؛ ومع ذلك، يمكن التخفيف من ذلك من خلال تقنيات دمج متعددة المستشعرات، وتحديدًا من خلال دمج بيانات الأشعة تحت الحمراء (IR) وبيانات LiDAR.
عند النظر إلى المستقبل، هناك إمكانات كبيرة للتقدم في تحديد العتبات التكيفية التي تأخذ في الاعتبار أنواع التضاريس المتنوعة، بالإضافة إلى الدمج في الوقت الحقيقي لبيانات مستشعرات LiDAR والأشعة تحت الحمراء. يمكن أن تنتقل هذه التحسينات بالنظام من نموذج تحكم تفاعلي بحت إلى إطار عمل تنقل شبه مستقل أكثر تطورًا، مما يعزز الوظائف العامة لوحدات التنقل المعتمدة على الذكاء الاصطناعي ووحدات مراقبة الصحة في إنترنت الأشياء ضمن التطبيقات الروبوتية المساعدة.
DOI: https://doi.org/10.62760/iteecs.5.1.2026.173
Publication Date: 2026-03-17
Author(s): Neelima Kalahasthi et al.
Primary Topic: Assistive Technology in Communication and Mobility
Overview
This paper presents the design and development of a Bluetooth-enabled smart wheelchair control system aimed at enhancing mobility and safety for users. The system allows operation via a smartphone application and incorporates ultrasonic sensors for obstacle detection, achieving a 90% accuracy rate in tests. The hardware is built around an Arduino Uno, an HC-05 Bluetooth module, an L298N motor controller, and an HC-SR04 ultrasonic sensor. The wheelchair operates at a power consumption of 25 watts, providing approximately 28 minutes of runtime on a 12 V, 1 Ah battery.
The proposed smart wheelchair system demonstrates significant advantages over existing technologies, such as voice and EMG-based systems, by being 25% more energy-efficient and offering a 30% increase in runtime. Its modular architecture facilitates the integration of future advancements, including Internet of Things (IoT) capabilities and artificial intelligence (AI) for navigation. Overall, this research contributes a repeatable and energy-efficient framework for developing low-cost smart wheelchair technologies, promoting greater accessibility and user safety.
Introduction
The introduction highlights the critical role of mobility in enhancing individual independence and quality of life. Despite the utility of traditional powered wheelchairs, their prohibitive cost and complexity limit accessibility, particularly in developing countries, where the World Health Organization (WHO) estimates that over 75 million individuals require wheelchairs, yet fewer than 20% can afford them.
Recent advancements in control systems, such as voice-gesture and EMG-based technologies, have emerged; however, these often rely on expensive sensors, require extensive calibration, and lack essential safety features like real-time obstacle detection. To address these challenges, the paper proposes a low-cost, Bluetooth-enabled smart wheelchair equipped with ultrasonic sensors, aiming to improve accessibility and safety for users.
Methods
The methodology for the smart wheelchair system involves five integrated modules: a control unit utilizing an Arduino Uno for real-time decision-making and PWM signal generation; a communication unit with an HC-05 Bluetooth module for smartphone control; an actuation unit featuring an L298N motor driver to manage two 12 V, 30 RPM DC motors for bidirectional movement; a sensing unit employing an ultrasonic sensor for obstacle detection up to 4 meters; and a power unit consisting of a 12V, 1Ah lithium-ion battery. The system’s design facilitates stable data transfer between the smartphone and the Bluetooth module, minimizing wiring complexity. The Bluetooth controller application allows for five basic commands, and the ultrasonic sensor ensures safety by automatically stopping the wheelchair when an obstacle is detected within 20 cm.
The experimental setup includes a prototype wheelchair measuring 50 × 40 cm, constructed from plywood and equipped with calibrated HC-SR04 ultrasonic sensors tilted at 15° for enhanced ground detection. Calibration involved measuring distances from 10 cm to 50 cm, revealing a measurement error of ±1 cm and a deviation of 5 cm within the 10-80 cm range. The tests were conducted in a controlled laboratory environment, with each experiment repeated five times to mitigate bias and enhance reliability. The structured wiring of the system supports stable performance and simplifies maintenance, contributing to the overall effectiveness of the smart wheelchair prototype.
Results
The results of the study indicate significant improvements in obstacle detection and energy efficiency compared to existing systems. As detailed in Table 3, the system achieved an obstacle detection accuracy of 90%, which represents a 10% enhancement over the findings of reference [22]. The linear velocity was recorded at 0.157 m/s, while the detection range was established at 4 meters. Notably, the power consumption was measured at 25.2 W, reflecting a 25% reduction compared to reference [21].
Furthermore, the battery runtime was calculated to be approximately 28 minutes, which is a 30% increase over the runtime reported in reference [21]. The power consumed by the system is expressed by the equation \( P = V \times I \), and the estimated system runtime is given by \( T = \frac{V \times A_{h} \times 60}{P} \), where the voltage is set at 12V and the Ampere-hour at 1, corroborating the reported runtime. Overall, these results underscore the system’s enhanced performance metrics in terms of detection accuracy and energy efficiency.
Discussion
The discussion section of the research paper outlines the motivation behind developing a unified, affordable, and intelligent wheelchair control system that addresses existing limitations in smart mobility solutions, such as inadequate real-time obstacle feedback, high costs, and lack of modularity for IoT and AI integration. The primary objectives include designing a Bluetooth and Arduino-based wheelchair with integrated obstacle detection, evaluating its performance in terms of speed, power, and accuracy, and establishing a modular platform for future enhancements. Key contributions of the study include a low-cost embedded system that combines Bluetooth control with ultrasonic obstacle detection, demonstrating a 25% reduction in power consumption and a 30% increase in runtime compared to existing control systems.
The paper also reviews related work, highlighting the evolution of wheelchair control systems from manual to semi-autonomous platforms, and identifies gaps in current research, particularly the need for systems that balance complexity with affordability. The proposed wheelchair’s control algorithm effectively manages movement based on Bluetooth inputs and ultrasonic feedback, ensuring safety by halting motion when obstacles are detected within a critical range. Performance analysis indicates that the prototype achieves a 90% success rate in obstacle detection, with stable operation in various environments. The findings suggest that the proposed design not only meets the practical needs of users but also lays the groundwork for future developments in assistive mobility technologies, including potential expansions into IoT and AI functionalities.
Limitations
The limitations of the current system include the inherent constraints of Bluetooth communication, which typically operates effectively within a range of approximately 10 meters. Future iterations may integrate Wi-Fi or ZigBee to enhance connectivity. Additionally, the detection performance is compromised on reflective or soft-textured surfaces; however, this can be mitigated through multi-sensor fusion techniques, specifically combining infrared (IR) and LiDAR data.
Looking ahead, there is significant potential for advancements in adaptive thresholding that considers varying terrain types, as well as the real-time fusion of LiDAR and infrared sensor data. These improvements could transition the system from a purely reactive control model to a more sophisticated semi-autonomous navigation framework, thereby enhancing the overall functionality of AI-based navigation and IoT health monitoring modules within assistive robotic applications.
