تقليل البيانات المعتمد على الشذوذ للحوسبة الطرفية الموفرة للطاقة في إنترنت الأشياء مع LoRa Anomaly-based data reduction for energy-efficient edge computing in IoT with LoRa

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-48086-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42098196
تاريخ النشر: 2026-05-07
المؤلف: Fadime Karadaş وآخرون
الموضوع الرئيسي: إنترنت الأشياء والحوسبة الحافة/الضباب

نظرة عامة

يتناول هذا القسم من ورقة البحث دور الحوسبة الطرفية في أنظمة إنترنت الأشياء (IoT)، مع التركيز على إمكاناتها في تعزيز كفاءة الطاقة من خلال معالجة البيانات بالقرب من المصدر. يحدد المؤلفون فجوة بحثية كبيرة في المنهجيات الحالية، التي غالبًا ما تتجاهل فوائد نقل البيانات الانتقائي، لا سيما في تصفية ونقل البيانات الشاذة فقط. لمعالجة ذلك، يقترحون طريقة تقليل البيانات المعتمدة على كشف الشذوذ باستخدام تقنية LoRa، مع الاستعانة بخوارزميتين للتعلم غير المراقب: DBSCAN وIsolation Forest. تظهر النتائج التجريبية أن DBSCAN تحقق تقليصًا في حجم البيانات بنسبة 98.19% وتقليصًا في استهلاك الطاقة بنسبة 98.10%، بينما تحقق Isolation Forest تقليصات بنسبة 97.32% لكلا المقياسين.

تسلط الخاتمة الضوء على فعالية كشف الشذوذ في تقليل نقل البيانات غير الضرورية، مما يؤدي إلى توفير كبير في الطاقة في هياكل الحوسبة الطرفية. تُظهر الدراسة أن DBSCAN تتفوق على الطرق الأخرى في كفاءة الطاقة، حيث تنقل فقط 91 نقطة بيانات مع تقليل كبير في استخدام الطاقة مقارنةً بنقل البيانات الكامل. تؤكد النتائج على أهمية اختيار الخوارزمية في تحسين أداء النظام، لا سيما في التطبيقات ذات الحجم الكبير والمقيدة بالطاقة. يقترح المؤلفون أن تستكشف الأبحاث المستقبلية العمليات التي تعمل بالطاقة من البطاريات، ومجموعات البيانات الأكبر، وضبط المعلمات التكيفية، والتوازن بين الطاقة الحاسوبية وطاقة الاتصال لتعزيز فهم كفاءة النظام في بيئات إنترنت الأشياء المعتمدة على الحوسبة الطرفية.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على أهمية الحوسبة الطرفية في الأنظمة الموزعة الحديثة، لا سيما لتطبيقات إنترنت الأشياء (IoT). من خلال معالجة البيانات بالقرب من مصدرها، تعزز الحوسبة الطرفية كفاءة النظام وتقلل من زمن الاستجابة، وهو أمر حاسم في مجالات مثل الأتمتة الصناعية، والمركبات المستقلة، ومراقبة الصحة. ومع ذلك، فإن الحجم الكبير من البيانات الناتجة عن المستشعرات يطرح تحديات، بما في ذلك زيادة استهلاك الطاقة وزيادة الازدحام الشبكي، مما يهدد استدامة العمليات المستمرة. للتخفيف من هذه القضايا، استكشف الباحثون استراتيجيات تقليل البيانات، لا سيما من خلال خوارزميات كشف الشذوذ التي تقوم بتصفية البيانات غير ذات الصلة، مما يقلل من النقل غير الضروري ويوفر الطاقة.

تحدد الورقة فجوة في الأدبيات الحالية، التي غالبًا ما تقيم أداء الكشف أو استهلاك الطاقة بشكل منفصل. تهدف إلى سد هذه الفجوة من خلال إجراء تحليل مقارن لاستهلاك الطاقة أثناء نقل البيانات في سيناريوهين: نقل البيانات الكامل باستخدام بروتوكول الاتصال LoRa والنقل الانتقائي بناءً على خوارزميتي كشف الشذوذ، Isolation Forest وDBSCAN. تؤكد الدراسة على أهمية طاقة الاتصال، التي عادةً ما تهيمن على استخدام الطاقة في أجهزة إنترنت الأشياء، وتستخدم قياسات تجريبية مع أجهزة حقيقية بدلاً من المحاكاة. تساهم هذه الأبحاث في تقييم تأثير كشف الشذوذ على استهلاك طاقة الاتصال في سياق الحوسبة الطرفية وتقارن بين الخوارزميتين ليس فقط من حيث أداء الكشف ولكن أيضًا من حيث توفير الطاقة المحقق من خلال نقل البيانات الانتقائي.

الطرق

في هذا القسم، يصف المؤلفون المنهجية المستخدمة لتقييم هيكل نقل البيانات الذي يركز على كفاءة الطاقة من خلال كشف الشذوذ. استخدمت الدراسة مستشعر الاهتزاز MPU6050 لجمع بيانات التسارع من طابعة ثلاثية الأبعاد، والتي تم تحليلها باستخدام خوارزميتين لكشف الشذوذ غير المراقب: DBSCAN وIsolation Forest. تم إجراء نقل البيانات عبر وحدة LoRa، المعروفة بقدراتها على المدى الطويل واستهلاك الطاقة المنخفض، تحت سيناريوهين: نقل البيانات الكامل (FDT)، حيث تم إرسال جميع نقاط البيانات، ونقل انتقائي للبيانات الشاذة فقط التي حددتها الخوارزميات. تم مراقبة استهلاك الطاقة أثناء هذه النقلات باستخدام مستشعرات التيار INA226، مما يسمح بإجراء تحليل مقارن لكفاءة الطاقة للطرق المختلفة.

شمل الإعداد التجريبي جهاز Raspberry Pi كجهاز طرفي وArduino Uno لمعالجة البيانات، مع قياس استهلاك الطاقة بواسطة وحدة INA226. تم تحسين نقل البيانات بفاصل زمني قدره 1.5 ثانية لمنع تصادم البيانات، لا سيما في سيناريو FDT. تهدف نتائج التجارب، التي لم يتم تفصيلها بعد، إلى تقديم رؤى حول آثار استهلاك الطاقة لاستخدام كشف الشذوذ في نقل البيانات مقارنةً بالطرق التقليدية. بشكل عام، تؤكد المنهجية على دمج مكونات الأجهزة والخوارزميات لتعزيز كفاءة الطاقة في أنظمة الاتصال بالبيانات.

النتائج

تم تقييم نتائج خوارزميات كشف الشذوذ، وخاصة DBSCAN وIsolation Forest (IF)، باستخدام مصفوفات الالتباس لتقييم أدائها في التصنيف. نجح DBSCAN في تصنيف 4,938 من أصل 4,971 نقطة بيانات طبيعية، محققًا درجة F1 تبلغ 1.00 للتصنيف الطبيعي ودرجة F1 تبلغ 0.78 لكشف الشذوذ، مع 33 إيجابية خاطئة. في المقابل، صنف خوارزم IF 4,894 نقطة طبيعية بشكل صحيح، محققًا درجة F1 تبلغ 0.99 للتصنيف الطبيعي و0.60 لكشف الشذوذ، ولكن مع عدد أكبر من الإيجابيات الخاطئة بلغ 77. كلا الخوارزميتين حددتا جميع الشذوذ البالغ عددها 58، ومع ذلك، فإن معدل الإيجابيات الخاطئة المنخفض لـ DBSCAN يشير إلى أنها أكثر كفاءة في استهلاك الطاقة لنقل البيانات في الأجهزة الطرفية.

كشف تحليل استهلاك الطاقة عن اختلافات كبيرة في استخدام الطاقة بين السيناريوهات التي تتضمن كشف الشذوذ وتلك التي لا تتضمنه. أدى السيناريو الأول، الذي شمل نقل البيانات غير المصفاة، إلى استهلاك تيار مرتفع باستمرار. في المقابل، أظهر السيناريو الثاني، حيث تم نقل الشذوذ فقط باستخدام DBSCAN وIF، انخفاضًا ملحوظًا في استهلاك التيار، مما يشير إلى تحسين كفاءة الطاقة. حافظ خوارزم DBSCAN على قيم تيار أقل وأكثر استقرارًا مقارنةً بـ IF، مما يبرز مزاياها في تقليل استهلاك الطاقة أثناء نقل البيانات.

تم إجراء تحليل إحصائي من خلال ANOVA أحادي الاتجاه لتقييم تأثير طرق نقل البيانات المختلفة على استهلاك الطاقة. تم إجراء تسعة تجارب، مع تسجيل قيم استهلاك الطاقة المتوسطة بالجول. ستتم تحليل النتائج، المقدمة في جدول، باستخدام طريقة Tukey HSD لتحديد الفروق المهمة بين الطرق المختلفة المستخدمة.

المناقشة

تسلط قسم المناقشة من ورقة البحث الضوء على أهمية كشف الشذوذ في تعزيز كفاءة الطاقة أثناء نقل البيانات في أنظمة إنترنت الأشياء، لا سيما عند الحافة. أظهرت الدراسات الحديثة أن النقل الانتقائي للبيانات، المدفوع بكشف الشذوذ، يمكن أن يقلل بشكل كبير من الحمل الاتصالي واستهلاك الطاقة. على سبيل المثال، اقترح Ni وآخرون إطار عمل تحسين حقق تقليصًا بنسبة 23.8% في استخدام الطاقة، بينما أظهر Taurone وآخرون أن كشف الشذوذ يمكن أن يحافظ على أداء الكشف أثناء نقل أقل من 1% من إجمالي البيانات. على الرغم من هذه التقدمات، تفتقر العديد من الدراسات الحالية إلى التحقق التجريبي وغالبًا ما تركز على النماذج النظرية أو تكوينات الشبكات المحددة، مما يبرز الحاجة إلى تقييمات عملية.

في هذه الدراسة، استخدم المؤلفون خوارزميتي DBSCAN وIsolation Forest لتسهيل كشف الشذوذ ونقل البيانات الانتقائي، مع التركيز على قياس توفير الطاقة من خلال التجارب مع الأجهزة الحقيقية. أشارت النتائج إلى أن طريقة نقل البيانات الكامل (FDT) استهلكت طاقة أكبر بكثير (30,580 جول) مقارنةً بالطرق المعتمدة على الشذوذ، التي حققت تقليصًا كبيرًا في البيانات (98.19% لـ DBSCAN و97.32% لـ Isolation Forest) وتوفير الطاقة (98.10% و97.32%، على التوالي). أكدت التحليلات الإحصائية، بما في ذلك ANOVA واختبارات Tukey HSD، أهمية هذه النتائج، مما يدل على أن طرق النقل الانتقائي لا تعزز فقط كفاءة الطاقة ولكن توفر أيضًا إطارًا عمليًا لتطبيقات إنترنت الأشياء المستقبلية.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-48086-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42098196
Publication Date: 2026-05-07
Author(s): Fadime Karadaş et al.
Primary Topic: IoT and Edge/Fog Computing

Overview

This research paper section discusses the role of edge computing in Internet of Things (IoT) systems, emphasizing its potential to enhance energy efficiency by processing data closer to the source. The authors identify a significant research gap in existing methodologies, which often overlook the benefits of selective data transmission, particularly in filtering and transmitting only anomalous data. To address this, they propose an anomaly detection-based data reduction method utilizing LoRa technology, employing two unsupervised learning algorithms: DBSCAN and Isolation Forest. Experimental results demonstrate that DBSCAN achieves a data volume reduction of 98.19% and energy consumption reduction of 98.10%, while Isolation Forest yields reductions of 97.32% for both metrics.

The conclusion highlights the effectiveness of anomaly detection in minimizing unnecessary data transmission, leading to substantial energy savings in edge computing architectures. The study shows that DBSCAN outperforms other methods in energy efficiency, transmitting only 91 data points with a significant reduction in energy use compared to full data transmission. The findings underscore the importance of algorithm selection in optimizing system performance, particularly in high-volume, energy-constrained applications. The authors suggest that future research should explore battery-powered operations, larger datasets, adaptive parameter tuning, and the balance between computational and communication energy to further enhance the understanding of system efficiency in edge-based IoT environments.

Introduction

The introduction of this research paper highlights the significance of Edge Computing in modern distributed systems, particularly for Internet of Things (IoT) applications. By processing data near its source, Edge Computing enhances system efficiency and reduces latency, which is crucial in fields such as industrial automation, autonomous vehicles, and health monitoring. However, the high volume of data generated by sensors poses challenges, including increased energy consumption and network congestion, threatening the sustainability of continuous operations. To mitigate these issues, researchers have explored data reduction strategies, particularly through anomaly detection algorithms that filter out irrelevant data, thereby minimizing unnecessary transmissions and conserving energy.

The paper identifies a gap in existing literature, which often evaluates detection performance or energy consumption in isolation. It aims to fill this gap by conducting a comparative analysis of energy consumption during data transmission in two scenarios: full data transmission using the LoRa communication protocol and selective transmission based on two anomaly detection algorithms, Isolation Forest and DBSCAN. The study emphasizes the importance of communication energy, which typically dominates energy use in IoT devices, and employs experimental measurements with real hardware rather than simulations. The main contributions of this research are twofold: it assesses the impact of anomaly detection on communication energy consumption in an Edge Computing context and compares the two algorithms not only on detection performance but also on the energy savings achieved through selective data transmission.

Methods

In this section, the authors describe the methodology employed to evaluate a data transmission structure focused on energy efficiency through anomaly detection. The study utilized an MPU6050 vibration sensor to collect acceleration data from a 3D printer, which was then analyzed using two unsupervised anomaly detection algorithms: DBSCAN and Isolation Forest. The transmission of data was conducted via a LoRa module, known for its long-range and low-power capabilities, under two scenarios: Full Data Transmission (FDT), where all data points were sent, and a selective transmission of only anomalous data identified by the algorithms. Energy consumption during these transmissions was monitored using INA226 current sensors, allowing for a comparative analysis of the energy efficiency of the different methods.

The experimental setup involved a Raspberry Pi as the edge device and an Arduino Uno for data processing, with the INA226 module measuring power consumption. The data transmission was optimized with a 1.5-second interval to prevent data collisions, particularly in the FDT scenario. The results of the experiments, which are yet to be detailed, aim to provide insights into the energy consumption implications of using anomaly detection in data transmission compared to traditional methods. Overall, the methodology emphasizes the integration of hardware components and algorithms to enhance energy efficiency in data communication systems.

Results

The results of the anomaly detection algorithms, specifically DBSCAN and Isolation Forest (IF), were evaluated using confusion matrices to assess their classification performance. DBSCAN successfully classified 4,938 out of 4,971 normal data points, yielding an F1-Score of 1.00 for normal classification and an F1-Score of 0.78 for anomaly detection, with 33 false positives. In contrast, the IF algorithm classified 4,894 normal points correctly, achieving an F1-Score of 0.99 for normal classification and 0.60 for anomaly detection, but with a higher false positive count of 77. Both algorithms effectively identified all 58 anomalies, yet DBSCAN’s lower false positive rate suggests it is more energy-efficient for data transmission in edge devices.

Power consumption analysis revealed significant differences in energy usage between scenarios with and without anomaly detection. The first scenario, which involved unfiltered data transmission, resulted in consistently high current consumption. In contrast, the second scenario, where only anomalies were transmitted using DBSCAN and IF, demonstrated a marked reduction in current consumption, indicating improved energy efficiency. The DBSCAN algorithm maintained lower and more stable current values compared to IF, further emphasizing its advantages in minimizing energy consumption during data transmission.

Statistical analysis through one-way ANOVA was conducted to evaluate the impact of different data transmission methods on energy consumption. A total of nine experiments were performed, with average energy consumption values recorded in joules. The results, presented in a table, will be further analyzed using the Tukey HSD method to identify significant differences between the various methods employed.

Discussion

The discussion section of the research paper highlights the significance of anomaly detection in enhancing energy efficiency during data transmission in IoT systems, particularly at the edge. Recent studies have shown that selective data transmission, driven by anomaly detection, can significantly reduce communication load and energy consumption. For instance, Ni et al. proposed an optimization framework that achieved a 23.8% reduction in energy use, while Taurone et al. demonstrated that anomaly detection could maintain detection performance while transmitting less than 1% of total data. Despite these advancements, many existing studies lack experimental validation and often focus on theoretical models or specific network configurations, underscoring the need for practical evaluations.

In this study, the authors employed the DBSCAN and Isolation Forest algorithms to facilitate anomaly detection and selective data transmission, with a focus on quantifying energy savings through real hardware experiments. The results indicated that the Full Data Transmission (FDT) method consumed significantly more energy (30,580 J) compared to the anomaly-based methods, which achieved substantial data reduction (98.19% for DBSCAN and 97.32% for Isolation Forest) and energy savings (98.10% and 97.32%, respectively). Statistical analyses, including ANOVA and Tukey HSD tests, confirmed the significance of these findings, demonstrating that selective transmission methods not only enhance energy efficiency but also provide a practical framework for future IoT applications.