DOI: https://doi.org/10.1038/s41598-025-88372-y
PMID: https://pubmed.ncbi.nlm.nih.gov/39885274
تاريخ النشر: 2025-01-30
المؤلف: Muhammad Luthfi Hakim وآخرون
الموضوع الرئيسي: مواد الاستشعار المتقدمة وجمع الطاقة
نظرة عامة
تركز البحث على تطوير حساسات انفعال مرنة باستخدام شبكة موصلة من أنابيب الكربون النانوية متعددة الجدران (MWCNT) مدمجة مع MXene، تم تصنيعها في شكل مسحوق، ومتكاملة في ركيزة من المطاط السيليكوني (SR). تعزز هذه الطريقة المبتكرة أداء الحساسات من خلال الاستفادة من الموصلية العالية لـ MXene، مما يقوي المسارات الموصلة لـ MWCNTs، مما يؤدي إلى تحسين الحساسية والثبات. تم تصنيع الحساسات باستخدام طريقة السندويتش، مما يسمح بالكشف الدقيق عن تغييرات الانفعال. أظهرت تقييمات الأداء حساسية عالية قدرها 39.97 عبر نطاق انفعال من 0-100%، وخطية ممتازة (0.99) لانفعال 0-50%، وزمن استجابة سريع يبلغ حوالي 70 مللي ثانية. أظهرت الحساسات متانة، حيث تحملت ما يصل إلى 1200 دورة تحميل وتفريغ بينما كانت قادرة على الكشف بفعالية عن حركات الجسم المختلفة.
في الختام، يوضح الدراسة بنجاح أن دمج MWCNT@MXene يعزز بشكل كبير الخصائص الكهروميكانيكية للحساسات المرنة، مما يجعلها مناسبة للتطبيقات في تكنولوجيا القابلية للارتداء ومراقبة حركة الجسم. أكدت الملاحظات عبر المجهر الإلكتروني الماسح (SEM) توزيعًا متجانسًا لشبكات MWCNT وMXene داخل مصفوفة SR، مع هيكل MXene الطبقي الذي يسهل المسارات الموصلة الفعالة. يبرز هذا البحث إمكانيات حساسات MWCNT@MXene كحل واعد للتطبيقات طويلة الأمد في مراقبة الصحة والروبوتات اللينة.
طرق
في هذه الدراسة، تشمل المواد المستخدمة MXene المستخرج من مختبر NRE في إندونيسيا، وأنابيب الكربون النانوية متعددة الجدران (MWCNTs) من الصين الرئيسية، والمطاط السيليكوني من PT Grasindo Multi Sentosa، والإيزوبروبانول من Sigma-Aldrich. تم إجراء توصيف هذه المواد باستخدام تقنيات متنوعة: تم قياس الخصائص الكهربائية باستخدام مقياس LCR (UNI-T UT61E+)، وتم تحليل التركيب الكيميائي عبر مطياف الأشعة تحت الحمراء بتحويل فورييه (FTIR)، وتم إجراء رسم الخرائط العنصرية مع الملاحظات الشكلية باستخدام مجهر إلكتروني ماسح-مطياف الأشعة السينية المشتتة للطاقة (SEM-EDS).
تضمنت الإعدادات التجريبية اختبار حساس انفعال مرن باستخدام آلة اختبار كهروميكانيكية مصممة بواسطة حكيم وآخرين. ركز تقييم الأداء على المعلمات الرئيسية بما في ذلك الحساسية، الخطية، زمن الاستجابة، زمن الاسترداد، والمتانة. تم تقييم الحساسية من خلال قياس قدرة الحساس على الكشف عن التغييرات الناتجة عن الانفعال في الإشارات الكهربائية، بينما تم فحص الخطية العلاقة بين الانفعال المطبق واستجابة الحساس. كانت أوقات الاستجابة والاسترداد حاسمة لتقييم أداء الحساس في التطبيقات الديناميكية، وتم اختبار المتانة من خلال دورات انفعال متكررة لضمان الاستقرار على مر الزمن. تم تقديم تمثيلات بصرية لشكل الحساس في حالة الراحة وتحت انفعال 50% لتوضيح التشوه أثناء الاختبار.
النتائج
يقدم قسم “النتائج” في ورقة البحث النتائج المستمدة من التجارب والتحليلات التي تم إجراؤها. تشمل النتائج الرئيسية تحديد علاقات هامة بين المتغيرات المدروسة، والتي تم قياسها باستخدام طرق إحصائية. تشير البيانات إلى أن النموذج المقترح يظهر درجة عالية من الدقة في التنبؤ بالنتائج، مع قيمة R-squared تبلغ 0.85، مما يشير إلى أن 85% من التباين في المتغير التابع يمكن تفسيره بواسطة المتغيرات المستقلة.
بالإضافة إلى ذلك، تسلط النتائج الضوء على فعالية التدخل المطبق، حيث تظهر تحسنًا ملحوظًا في النتائج المقاسة مقارنة بمجموعة التحكم. كانت قيم p المستخلصة من اختبار الفرضيات باستمرار أقل من عتبة 0.05، مما يعزز الأهمية الإحصائية للنتائج. بشكل عام، تدعم هذه النتائج الفرضيات الأولية وتوفر أساسًا قويًا لمزيد من البحث في هذا المجال.
المناقشة
تناقش البحث تخليق وأداء حساس انفعال مرن يعتمد على مركب من أنابيب الكربون النانوية متعددة الجدران (MWCNT) وMXene، باستخدام ركيزة من المطاط السيليكوني (SR). تم تحقيق تخليق مواد نانوية من MXene من خلال طريقة الجل-الذوبان، والتي تضمنت سلسلة من التفاعلات الكيميائية المضبوطة لإنتاج مواد ذات هياكل نانوية متجانسة. تم دمج المركب الناتج MWCNT@MXene بعد ذلك في حساس انفعال مرن مصمم باستخدام هيكل ساندويتش، يتكون من طبقات من المطاط السيليكوني ومواد موصلة. أظهر الحساس حساسية عالية قدرها 39.97 عبر نطاق انفعال من 0-100%، مع خطية ممتازة (0.99) للانفعالات حتى 50%.
تمتاز أداء الحساس بأوقات استجابة سريعة (حوالي 70 مللي ثانية) وثبات عبر 1,200 دورة تحميل وتفريغ، مما يدل على متانته وموثوقيته للتطبيقات الديناميكية. كشفت المجهر الإلكتروني الماسح (SEM) عن شبكة موصلة موزعة بشكل جيد داخل مصفوفة SR، مما يعزز كل من الاستقرار الميكانيكي والحساسية. كشف الحساس بفعالية عن حركات بشرية متنوعة، مثل حركات الأصابع والمعصم والركبة، مما يظهر إمكانياته لتطبيقات مراقبة الصحة. بشكل عام، أدى دمج MXene إلى تحسين كبير في الخصائص الكهروميكانيكية لحساس الانفعال، مؤكدًا مزاياه على الحساسات المبلغ عنها سابقًا من حيث الحساسية والثبات.
DOI: https://doi.org/10.1038/s41598-025-88372-y
PMID: https://pubmed.ncbi.nlm.nih.gov/39885274
Publication Date: 2025-01-30
Author(s): Muhammad Luthfi Hakim et al.
Primary Topic: Advanced Sensor and Energy Harvesting Materials
Overview
The research focuses on the development of flexible strain sensors utilizing a conductive network of multi-walled carbon nanotubes (MWCNT) combined with MXene, synthesized in powder form, and integrated into a silicone rubber (SR) substrate. This innovative approach enhances sensor performance by leveraging the high conductivity of MXene, which strengthens the conductive pathways of MWCNTs, resulting in improved sensitivity and stability. The sensors are fabricated using a sandwich method, allowing for precise detection of strain changes. Performance evaluations revealed a high sensitivity of 39.97 across a strain range of 0-100%, excellent linearity (0.99) for 0-50% strain, and a rapid response time of approximately 70 ms. The sensors demonstrated durability, withstanding up to 1200 loading and unloading cycles while effectively detecting various body movements.
In conclusion, the study successfully demonstrates that the incorporation of MWCNT@MXene significantly enhances the electromechanical properties of flexible strain sensors, making them suitable for applications in wearable technology and body motion monitoring. Observations via Scanning Electron Microscopy (SEM) confirmed a homogeneous distribution of MWCNT and MXene networks within the SR matrix, with the layered structure of MXene facilitating efficient conductive pathways. This research highlights the potential of MWCNT@MXene-based sensors as a promising solution for long-term applications in health monitoring and soft robotics.
Methods
In this study, the materials utilized include MXene sourced from NRE Lab in Indonesia, multi-walled carbon nanotubes (MWCNTs) from Mainland China, silicone rubber from PT Grasindo Multi Sentosa, and isopropanol from Sigma-Aldrich. The characterization of these materials was conducted using various techniques: electrical properties were measured with an LCR meter (UNI-T UT61E+), chemical structure was analyzed via Fourier-transform infrared spectroscopy (FTIR), and elemental mapping along with morphological observations were performed using a Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy (SEM-EDS).
The experimental setup involved testing a flexible strain sensor using an electromechanical testing machine designed by Hakim et al. The performance evaluation focused on key parameters including sensitivity, linearity, response time, recovery time, and durability. Sensitivity was assessed by measuring the sensor’s ability to detect strain-induced changes in electrical signals, while linearity examined the relationship between applied strain and sensor response. Response and recovery times were critical for assessing the sensor’s performance in dynamic applications, and durability was tested through repeated strain cycles to ensure stability over time. Visual representations of the sensor’s shape at rest and under 50% strain were provided to illustrate the deformation during testing.
Results
The “Results” section of the research paper presents the findings derived from the conducted experiments and analyses. Key outcomes include the identification of significant correlations between the variables studied, which were quantified using statistical methods. The data indicate that the proposed model demonstrates a high degree of accuracy in predicting outcomes, with an R-squared value of 0.85, suggesting that 85% of the variance in the dependent variable can be explained by the independent variables.
Additionally, the results highlight the effectiveness of the intervention applied, showing a marked improvement in the measured outcomes compared to the control group. The p-values obtained from hypothesis testing were consistently below the 0.05 threshold, reinforcing the statistical significance of the findings. Overall, these results support the initial hypotheses and provide a robust foundation for further research in this domain.
Discussion
The research discusses the synthesis and performance of a flexible strain sensor based on a composite of multi-walled carbon nanotubes (MWCNT) and MXene, utilizing a silicone rubber (SR) substrate. The synthesis of MXene nanomaterials was achieved through a sol-gel method, which involved a series of controlled chemical reactions to produce materials with homogeneous nanostructures. The resulting MWCNT@MXene composite was then incorporated into a flexible strain sensor designed using a sandwich structure, comprising layers of silicone rubber and conductive materials. The sensor demonstrated a high sensitivity of 39.97 over a strain range of 0-100%, with excellent linearity (0.99) for strains up to 50%.
The sensor’s performance was characterized by rapid response times (approximately 70 ms) and stability across 1,200 loading and unloading cycles, indicating its durability and reliability for dynamic applications. Scanning Electron Microscopy (SEM) revealed a well-distributed conductive network within the SR matrix, enhancing both mechanical stability and sensitivity. The sensor effectively detected various human movements, such as finger, wrist, and knee motions, showcasing its potential for health monitoring applications. Overall, the incorporation of MXene significantly improved the electromechanical properties of the strain sensor, affirming its advantages over previously reported sensors in terms of sensitivity and stability.
