نابينات شبيهة بجانوس لاستقرار رغوة البروتين القابلة للتبديل Janus-like napins for switchable protein foam stability

شارك:
المجلة: Journal of Colloid and Interface Science، المجلد: 719
DOI: https://doi.org/10.1016/j.jcis.2026.140593
PMID: https://pubmed.ncbi.nlm.nih.gov/42066697
تاريخ النشر: 2026-04-23
المؤلف: Sybren J.M. Zondervan وآخرون
الموضوع الرئيسي: البروتينات في نظم الغذاء

نظرة عامة

في هذه الدراسة، يتم التحقيق في استقرار الرغوات المدعومة بالنابينات بالنسبة لجهدها الزتاوي. تشير النتائج إلى أن النابينات تخلق رغوات مستقرة عند جهد زتاوي قدره 0 مللي فولت، بينما يؤدي الارتفاع الطفيف إلى -15 مللي فولت إلى تقليل استقرار الرغوة بشكل كبير بمقدار خمسة أضعاف. يُعزى هذا الاستقرار المعزز عند 0 مللي فولت إلى تعبئة البروتين الأكثر كثافة وزيادة التفاعلات الجانبية بين البروتينات عند الواجهة، مما يسمح للنابينات بتشكيل شبكات لزجة مرنة تتحمل تشوهات الرغوة. في المقابل، عند -15 مللي فولت، تظهر النابينات ارتباطًا أضعف، مما يؤدي إلى سهولة أكبر في إزالة الامتصاص وتمزق الفيلم تحت ضغوط أقل (حد أقصى 288 باسكال مقارنة بحوالي 500 باسكال عند 0 مللي فولت).

تسلط النتائج الضوء على أن حتى التعديلات الطفيفة في جهد الزتاوي للنابينات يمكن أن تتحكم بشكل فعال في استقرار الرغوة والسلوك الواجهوي. تشير هذه القابلية للتعديل إلى تطبيقات محتملة للرغوات المدعومة بالنابينات في المواد التي تتطلب خصائص قابلة للتبديل، مما يوسع من استخدامها في سياقات صناعية متنوعة. يتم وضع البيانات المقدمة في سياق الأدبيات الموجودة، مما يعزز أهمية هذه النتائج في مجال استقرار الرغوة.

مقدمة

ت outlines المقدمة أهمية الرغوات في تطبيقات متنوعة، مع التأكيد على دورها الهيكلي في مواد مثل الطعام ومستحضرات التجميل. تتكون الرغوات من صفائح سائلة وحدود بلاتو التي تحبس الهواء، مما يستلزم وجود عوامل نشطة سطحية للحفاظ على الاستقرار. تعمل البروتينات، وخاصة الجزيئات الأمفيليكية القائمة على البيولوجيا، كعوامل تثبيت فعالة للرغوة بسبب قدرتها على تعزيز اللزوجة السطحية ومنع التكتل من خلال التفاعلات بين الجزيئات. من بين هذه، تُظهر النابينات المستخرجة من بذور اللفت، التي تتميز بهيكلها الشبيه بجانوس ووزنها الجزيئي المنخفض، وعدًا كعوامل تثبيت للرغوة، على الرغم من أن خصائصها الرغوية عند درجة حموضة محايدة تم الإبلاغ عنها سابقًا على أنها دون المستوى الأمثل.

تفترض الدراسة أن جهد الزتاوي المنخفض نسبيًا للنابينات، الذي يتغير بشكل طفيف عبر نطاق درجة الحموضة من 2 إلى 8، قد يكون كافيًا لمنع التفاعلات الجانبية الضارة بين البروتينات عند الواجهة. يمكن أن تسهل هذه الخاصية محاذاة النابينات عند واجهة الهواء والماء، مما يؤدي إلى رغوات أكثر استقرارًا مقارنة بالبروتينات المشحونة. للتحقيق في هذه الفرضية، تفحص الدراسة خصائص تثبيت الرغوة للنابينات، مع التركيز على ترتيبها الواجهوي، وديناميات الفيلم الرقيق، وسلوك الرغوة الكثيفة تحت ظروف شحن متغيرة. تهدف النتائج إلى تعزيز قيمة النابينات المستخرجة من تيارات زيت اللفت الجانبية واستكشاف تطبيقاتها كجزيئات نانوية أمفيليكية شبيهة بجانوس قائمة على البيولوجيا.

طرق

في هذه الدراسة، تم استخراج النابينات عند درجة حموضة 2 بواسطة Wageningen Food and Biobased Research وتم تخزينها لاحقًا في حاويات محكمة الإغلاق في الهواء عند -18 درجة مئوية في الظلام حتى الاستخدام لاحقًا. كانت جميع المواد الكيميائية المستخدمة في التجارب من الدرجة التحليلية، تم الحصول عليها من Sigma-Aldrich أو Merck. بالنسبة لتحليل SDS-PAGE، تم الحصول على المواد من Invitrogen Novex (Thermo Fisher Scientific، هولندا). بالإضافة إلى ذلك، تم استخدام الماء منزوع الأيونات من نظام تنقية المياه Milli-Q® EQ. 7000 (Sigma Aldrich، ألمانيا) طوال فترة البحث لضمان نقاء المواد الكيميائية.

نتائج

يقدم قسم “النتائج” من ورقة البحث النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يسلط الضوء على النتائج المهمة، بما في ذلك أي تحليلات إحصائية تم إجراؤها، والتي تدعم الفرضيات أو أسئلة البحث المطروحة في الدراسة. عادةً ما يتم توضيح النتائج من خلال الجداول أو الرسوم البيانية أو الأشكال، مما يوفر تمثيلًا بصريًا للبيانات التي تم جمعها.

قد يناقش القسم أيضًا تداعيات النتائج، مقارنًا إياها مع الأدبيات الموجودة لوضع النتائج في سياق أوسع من الدراسة. يتم تناول أي نتائج غير متوقعة أو شذوذ، مع تقديم تفسيرات محتملة. بشكل عام، يخدم هذا القسم لنقل المساهمات الأساسية للبحث، مع التأكيد على الصلة وتأثير النتائج على الموضوع المعني.

مناقشة

في هذا القسم، تبحث الدراسة في الخصائص الكيميائية والواجهوية لاستخراج النابين المستخرج من بذور اللفت. تم تقدير محتوى البروتين بنسبة 76% وزناً باستخدام طريقة دماس، وأكد تحليل SDS-PAGE وجود النابينات. تم تقييم جهد الزتاوي لتشتت النابينات عبر نطاق درجة حموضة من 3.0 إلى 9.0، كاشفًا عن قيم تقارب 0 مللي فولت عند درجة حموضة 3.5 و-15 مللي فولت عند درجة حموضة 9.0. تشير هذه النتائج إلى أن الخصائص الواجهوية، بما في ذلك معدلات امتصاص البروتين واستقرار الفيلم، تتأثر بجهد الزتاوي، حيث تظهر كينتيك الامتصاص معدلًا أسرع عند درجة حموضة محايدة مقارنة بالظروف القلوية بسبب التنافر الكهروستاتيكي.

تمت دراسة السلوك الريولوجي للواجهات المدعومة بالنابينات من خلال ريولوجيا القص الواجهوي وتجارب لانغموير-بلودجيت. عند جهد زتاوي قدره 0 مللي فولت، أظهرت واجهة النابينات خصائص لزجة مرنة، مع تفاعلات جانبية كبيرة بين البروتينات تسهم في الاستقرار ضد التشوه. على العكس من ذلك، عند -15 مللي فولت، تصرفت الواجهة بشكل أكثر شبيهة بالسائل، مما يشير إلى تفاعلات أضعف وميول للإزالة تحت الضغط. كشفت المجهرية القوية الذرية عن هياكل واجهية متميزة، مع شبكة كثيفة عند 0 مللي فولت وطبقة أكثر تجانسًا عند -15 مللي فولت. تشير هذه النتائج إلى أن الشحنة الكهروستاتيكية للنابينات تلعب دورًا حاسمًا في تعديل سلوكها الواجهوي واستقرارها، مما يؤثر على تطبيقاتها المحتملة في علوم الغذاء والمواد.

Journal: Journal of Colloid and Interface Science, Volume: 719
DOI: https://doi.org/10.1016/j.jcis.2026.140593
PMID: https://pubmed.ncbi.nlm.nih.gov/42066697
Publication Date: 2026-04-23
Author(s): Sybren J.M. Zondervan et al.
Primary Topic: Proteins in Food Systems

Overview

In this study, the stability of foams stabilized by napins is investigated in relation to their zeta-potential. The findings indicate that napins create stable foams at a zeta-potential of 0 mV, while a slight increase to -15 mV significantly reduces foam stability by a factor of five. This enhanced stability at 0 mV is attributed to denser protein packing and increased lateral protein-protein interactions at the interface, allowing napins to form resilient viscoelastic networks that withstand foam deformations. In contrast, at -15 mV, napins exhibit looser attachment, leading to easier desorption and film rupture under lower pressures (maximum 288 Pa compared to ~500 Pa at 0 mV).

The results highlight that even minor adjustments in the zeta-potential of napins can effectively control foam stability and interfacial behavior. This tunability suggests potential applications for napin-stabilized foams in materials that require switchable properties, thereby broadening their utility in various industrial contexts. The data presented are contextualized with existing literature, reinforcing the significance of these findings in the field of foam stabilization.

Introduction

The introduction outlines the significance of foams in various applications, emphasizing their structural role in materials such as food and cosmetics. Foams are composed of liquid lamellae and Plateau borders that trap air, necessitating the presence of surface-active agents to maintain stability. Proteins, particularly biobased amphiphilic molecules, serve as effective foam stabilizers due to their ability to enhance surface viscoelasticity and inhibit coalescence through intermolecular interactions. Among these, napins from rapeseeds, characterized by their Janus-like structure and low molecular weight, show promise as foam stabilizers, although their foaming properties at neutral pH have been previously reported as suboptimal.

The study hypothesizes that the relatively low zeta-potential of napins, which varies minimally across a pH range of 2 to 8, may still be adequate to prevent detrimental lateral protein interactions at the interface. This property could facilitate the alignment of napins at the air-water interface, potentially leading to more stable foams compared to charged proteins. To investigate this hypothesis, the research examines the foam stabilization properties of napins, focusing on their interfacial arrangement, thin film dynamics, and bulk foam behavior under varying charge conditions. The findings aim to enhance the valorization of napins from rapeseed oil side-streams and explore their application as biobased Janus-like amphiphilic nanoparticles.

Methods

In this study, napins were extracted at pH 2 by Wageningen Food and Biobased Research and subsequently stored in air-sealed containers at -18 °C in the dark until further use. All chemicals utilized in the experiments were of analytical grade, procured from Sigma-Aldrich or Merck. For the SDS-PAGE analysis, materials were obtained from Invitrogen Novex (Thermo Fisher Scientific, the Netherlands). Additionally, deionised water from the Milli-Q® EQ. 7000 water purification system (Sigma Aldrich, Germany) was employed throughout the research to ensure the purity of the reagents.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments or analyses. It highlights the significant outcomes, including any statistical analyses performed, which support the hypotheses or research questions posed in the study. The results are typically illustrated through tables, graphs, or figures, providing a visual representation of the data collected.

The section may also discuss the implications of the findings, comparing them with existing literature to contextualize the results within the broader field of study. Any unexpected results or anomalies are addressed, along with potential explanations. Overall, this section serves to convey the core contributions of the research, emphasizing the relevance and impact of the findings on the subject matter.

Discussion

In this section, the study investigates the chemical characterization and interfacial properties of napin extracts derived from rapeseeds. The protein content was quantified at 76 wt% using the Dumas method, and SDS-PAGE analysis confirmed the presence of napins. The zeta-potential of napin dispersions was assessed across a pH range of 3.0 to 9.0, revealing values of approximately 0 mV at pH 3.5 and -15 mV at pH 9.0. These findings indicate that the interfacial properties, including protein adsorption rates and film stability, are influenced by the zeta-potential, with the adsorption kinetics showing a faster rate at neutral pH compared to alkaline conditions due to electrostatic repulsion.

The rheological behavior of napin-stabilized interfaces was characterized through interfacial shear rheology and Langmuir-Blodgett experiments. At a zeta-potential of 0 mV, the napin interface exhibited viscoelastic properties, with significant lateral protein-protein interactions contributing to stability against deformation. Conversely, at -15 mV, the interface behaved more like a liquid, indicating weaker interactions and a propensity for desorption under strain. Atomic force microscopy revealed distinct interfacial structures, with a dense network at 0 mV and a more homogeneous layer at -15 mV. These results suggest that the electrostatic charge of napins plays a critical role in modulating their interfacial behavior and stability, impacting their potential applications in food and material science.