DOI: https://doi.org/10.1016/j.mechmachtheory.2026.106416
تاريخ النشر: 2026-03-07
المؤلف: Paulo Flores وآخرون
الموضوع الرئيسي: التعلم القائم على المشكلات والمشاريع
نظرة عامة
تقدم هذه الورقة مشروعًا تربويًا موجهًا نحو الطالب مصممًا لتعليم ديناميات الأنظمة الميكانيكية من خلال تحدٍ عملي يسمى حفلة السباق. في هذا المشروع، يتعاون الطلاب في فرق لتصميم وتطوير وبناء سيارة صغيرة يجب أن تسير خمسة أمتار على سطح أفقي في أقصر وقت ممكن. يدمج المشروع بفعالية المبادئ الأساسية للديناميكا مع التطبيقات العملية، ويغطي مواضيع أساسية مثل تفكيك الأنظمة الميكانيكية، وإنشاء مخططات الجسم الحر، وصياغة معادلات الحركة، وتحليل النتائج.
تعتبر تنفيذ تحدي حفلة السباق في جامعتين برتغاليتين دراسة حالة لتقييم فعالية هذا النهج التعليمي. تشير النتائج إلى أن مشروع حفلة السباق يعزز بشكل كبير تجربة التعلم وفهم الديناميات الميكانيكية، مما يظهر إمكانيته كأداة تعليمية فعالة في مناهج الهندسة.
مقدمة
تسلط مقدمة الورقة الضوء على الحاجة الملحة للتحول في التعليم الهندسي لتلبية متطلبات القرن الحادي والعشرين. مع إعادة تشكيل التقدم التكنولوجي للمشهد، يجب على المهندسين تطوير مهارات تقنية بالإضافة إلى كفاءات في الإبداع، والتعاون، والتواصل الفعال. لقد أثبتت طرق التدريس التقليدية المعتمدة على المحاضرات أنها غير كافية في تعزيز هذه المهارات الأساسية، مما أدى إلى disengagement الطلاب وتحت تطوير المهارات الناعمة والرقمية. استجابةً لذلك، هناك تأكيد متزايد على أساليب التعلم الموجهة نحو الطالب، التي تشجع المشاركة النشطة وحل المشكلات من خلال طرق مثل التعلم القائم على المشاريع والفصول الدراسية المقلوبة. لقد أظهرت هذه الاستراتيجيات وعدًا في تعزيز دافع الطلاب ونتائج التعلم، على الرغم من استمرار التحديات مثل الموارد المحدودة والمناهج الجامدة.
تتناول الورقة بشكل خاص التعقيدات المرتبطة بتعليم ديناميات الآلات، وهي منطقة حيوية في التعليم الهندسي. تشير إلى أن الطرق التقليدية غالبًا ما تفشل في ربط المفاهيم الرياضية المجردة بالتطبيقات الواقعية، مما يترك الطلاب يكافحون مع المفاهيم الخاطئة ونقص الانخراط. لسد هذه الفجوة، يقترح المؤلفون مشروعًا تربويًا مبتكرًا يسمى “حفلة السباق”، حيث يقوم الطلاب بتصميم وبناء سيارة صغيرة من نوع dragster. لا يعزز هذا المشروع العملي المعرفة النظرية للديناميات فحسب، بل يزرع أيضًا المهارات الناعمة مثل العمل الجماعي والتواصل. تمهد المقدمة الطريق لاستكشاف مفصل لتنفيذ المشروع وفعاليته في تعزيز كل من الكفاءات التقنية والشخصية بين طلاب الهندسة.
نقاش
مشروع حفلة السباق هو مبادرة تربوية حيث يعمل الطلاب في فرق لتصميم وبناء سيارة صغيرة من نوع dragster مدفوعة بنابض حلزوني، بهدف تحقيق أقصى سرعة على مسافة خمسة أمتار على سطح أملس. تتلقى كل مجموعة مجموعة أساسية تحتوي على مواد أساسية، بما في ذلك الخشب، وعمود معدني، ونابض حلزوني، ويجب أن تلتزم بمتطلبات تصميم محددة مثل الأبعاد، وتكوينات العجلات، وحظر الأجهزة الإلكترونية. يركز المشروع على تقييم صلابة النابض من خلال طرق تحليلية وتجريبية، وتطوير تصميمات أولية، وتقييم الأداء باستخدام محاكاة MATLAB، وإنشاء نماذج CAD للتحليل الهيكلي.
يشارك الطلاب في تجربة تعلم شاملة تشمل محاضرات تقليدية حول مبادئ الهندسة الميكانيكية، وتصميم وتطوير عملي، وعمل جماعي تعاوني. يُطلب من كل فريق توثيق عمليتهم من خلال تقارير وعروض تقديمية، مما يعزز النقاش والتفكير حول خيارات تصميمهم. يت culminate المشروع في مسابقة حيث يتم تقييم أداء السيارة الصغيرة بناءً على السرعة، والجمالية، والموثوقية. يعتمد نجاح المشروع على العمل الجماعي الفعال والقدرة على التنقل عبر التحديات بشكل تعاوني، مع تقديم المعلمين التوجيه لتعزيز استقلالية الطلاب ونتائج التعلم.
DOI: https://doi.org/10.1016/j.mechmachtheory.2026.106416
Publication Date: 2026-03-07
Author(s): Paulo Flores et al.
Primary Topic: Problem and Project Based Learning
Overview
This paper introduces a student-centered pedagogical project designed to teach the dynamics of mechanical systems through a practical challenge called the Race Party. In this project, students collaborate in teams to design, develop, and construct a minicar that must travel five meters on a horizontal surface in the shortest time possible. The project effectively integrates fundamental principles of dynamics with practical applications, covering essential topics such as the discretization of mechanical systems, the creation of free-body diagrams, the formulation of equations of motion, and the analysis of results.
The implementation of the Race Party challenge at two Portuguese universities serves as a case study to evaluate the effectiveness of this teaching approach. The findings indicate that the Race Party project significantly enhances the learning experience and understanding of mechanical dynamics, demonstrating its potential as an effective educational tool in engineering curricula.
Introduction
The introduction of the paper highlights the urgent need for transformation in engineering education to meet the demands of the 21st century. As technological advancements reshape the landscape, engineers must develop not only technical skills but also competencies in creativity, collaboration, and effective communication. Traditional lecture-based pedagogies have proven inadequate in fostering these essential skills, leading to student disengagement and underdevelopment of soft and digital skills. In response, there is a growing emphasis on student-centered learning approaches, which encourage active participation and problem-solving through methods such as project-based learning and flipped classrooms. These strategies have shown promise in enhancing student motivation and learning outcomes, although challenges such as limited resources and rigid curricula persist.
The paper specifically addresses the complexities involved in teaching the dynamics of machinery, a critical area in engineering education. It notes that traditional methods often fail to connect abstract mathematical concepts to real-world applications, leaving students struggling with misconceptions and a lack of engagement. To bridge this gap, the authors propose an innovative pedagogical project called the “Race Party,” where students design and build a dragster-type minicar. This hands-on project not only reinforces theoretical knowledge of dynamics but also cultivates soft skills such as teamwork and communication. The introduction sets the stage for a detailed exploration of the project’s implementation and its effectiveness in enhancing both technical and interpersonal competencies among engineering students.
Discussion
The Race Party project is a pedagogical initiative where students work in teams to design and construct a dragster-type minicar powered by a helical spring, with the objective of maximizing speed over a five-meter distance on a smooth surface. Each team receives a basic kit containing essential materials, including wood, a metal shaft, and a helical spring, and must adhere to specific design requirements such as dimensions, wheel configurations, and the prohibition of electronic devices. The project emphasizes the evaluation of spring stiffness through both analytical and experimental methods, the development of preliminary designs, performance evaluations using MATLAB simulations, and the creation of CAD models for structural analysis.
Students engage in a comprehensive learning experience that includes traditional lectures on mechanical engineering principles, hands-on design and development, and collaborative teamwork. Each team is required to document their process through reports and presentations, fostering discussion and reflection on their design choices. The project culminates in a competition where the minicar’s performance is assessed based on speed, aesthetics, and reliability. The success of the project hinges on effective teamwork and the ability to navigate challenges collaboratively, with instructors providing guidance to enhance student autonomy and learning outcomes.
