DOI: https://doi.org/10.1016/j.talanta.2026.129607
PMID: https://pubmed.ncbi.nlm.nih.gov/41819716
تاريخ النشر: 2026-03-10
المؤلف: Nazlı Öncer وآخرون
الموضوع الرئيسي: تخليق وتطبيقات جزيئات الذهب والفضة النانوية
نظرة عامة
تسلط الأبحاث الضوء على تطوير منصة حساسة للغاية لتشتت رامان المعزز بالسطح (SERS) باستخدام هيكل نانوarray معدني-عازل-معدني (MIM) للكشف عن بقايا المبيدات، وبشكل خاص Pyrimethanil (PYM)، Imidacloprid (IMI)، وChlormequat chloride (CCC) في عصير الفلفل. حققت المنصة حد كشف لـ PYM يبلغ 0.16 ملغ/كغ، وهو أقل بكثير من الحدود القصوى لبقايا المبيدات التي وضعتها الهيئة الأوروبية لسلامة الغذاء (EFSA) ووكالة حماية البيئة (EPA). تشير الدراسة إلى أن التفاعل الأقوى بين π والمعادن لـ PYM يعزز نشاط تشتت رامان الخاص به، مما يؤدي إلى حساسية متفوقة مقارنة بالمبيدات الأخرى التي تم اختبارها. أظهرت تقنيات التعلم الآلي غير الخاضع للإشراف، بما في ذلك تحليل المكونات الرئيسية (PCA) وتحليل العنقود الهرمي (HCA)، تمييزًا فعالًا لتركيزات المبيدات في كل من العينات الملوثة والعينات الغذائية الحقيقية.
في الختام، أظهرت منصة SERS المعتمدة على MIM موثوقية تحليلية عالية وتوافقًا مع مصفوفات الغذاء المعقدة، خاصة في الكشف عن PYM عند تركيزات منخفضة. بينما أظهرت IMI وCCC قممًا مميزة، لم تكن استجاباتهما خطية تمامًا، مما يتطلب نموذج منحنى لوجستي لحسابات دقيقة لحد الكشف (LoD). تم تأكيد قابلية تكرار المنصة واستقرارها من خلال قيم انحراف معياري نسبي منخفض (RSD) وأنماط قمم متسقة. ومع ذلك، قد تؤثر التحديات مثل تجانس الإنتاج وتعقيد العينة على قابلية التكرار. من المتوقع أن تؤدي التحسينات المستقبلية، بما في ذلك التكامل مع أنظمة رامان المحمولة وخوارزميات الذكاء الاصطناعي، إلى تحسين حساسية الكشف وكفاءة التشغيل، مما يضع هذه الطريقة كأداة واعدة لرصد بقايا المبيدات بسرعة في ظروف العالم الحقيقي.
مقدمة
تناقش مقدمة ورقة البحث الاستخدام المتزايد لمخاليط المبيدات في الزراعة، مع تسليط الضوء على المبيد الفطري المحدد Pyrimethanil (PYM)، والمبيد الحشري النيونكوتينويدي Imidacloprid (IMI)، ومنظم نمو النباتات Chlormequat chloride (CCC). بينما تعتبر هذه المواد الكيميائية فعالة في حماية المحاصيل، فإن تطبيقها المفرط يثير القلق بشأن صحة الإنسان وسلامة البيئة بسبب احتمال تراكمها في المنتجات الغذائية. وقد وضعت الهيئات التنظيمية، مثل الهيئة الأوروبية لسلامة الغذاء (EFSA) ووكالة حماية البيئة الأمريكية (EPA)، حدودًا قصوى لبقايا هذه المبيدات، مما يبرز الحاجة إلى طرق تحليلية حساسة لرصد البقايا في مصفوفات الغذاء.
تقدم طرق الكشف الحالية، بما في ذلك الكروماتوغرافيا السائلة عالية الأداء (HPLC) والكروماتوغرافيا الغازية-مطياف الكتلة (GC-MS)، دقة عالية ولكنها غالبًا ما تكون كثيفة العمالة، مكلفة، وتتطلب موظفين مدربين. بالإضافة إلى ذلك، تكافح طرق الكروماتوغرافيا الغازية التقليدية مع النيونكوتينويدات القطبية مثل IMI بسبب مشكلات تقلبها. تقترح الورقة استخدام مطيافية رامان المعززة بالسطح (SERS) كبديل واعد، مستفيدة من “نقاط ساخنة” بلازمونية لتضخيم إشارات رامان من أجل تحسين حساسية الكشف. تقدم الدراسة منصة كشف SERS تعتمد على التعلم الآلي تستخدم هيكل معدني-عازل-معدني (MIM)، مما يظهر تحديدًا سريعًا وخاليًا من العلامات وحساسًا للغاية لبقايا المبيدات، مع إمكانية قوية للتطبيقات الميدانية في ظروف البيئة الحقيقية.
طرق
في هذا القسم، يوضح المؤلفون المواد والأدوات المستخدمة في دراستهم التجريبية. قاموا بشراء عدة مبيدات، بما في ذلك Pyrimethanil وImidacloprid وChlormequat chloride وMetalaxyl وAmetoctradin، من Sigma-Aldrich، وشرائح السيليكون من MicroChemicals GmbH. تم إجراء قياسات رامان باستخدام مطياف رامان عالي الدقة تم وصفه سابقًا في أدبياتهم. يستخدم هذا المطياف ليزر ديود ذو عرض خط ضيق يعمل عند 785 نانومتر مع قدرة قصوى تبلغ 400 مللي واط، ويستخدم سلسلة من المكونات البصرية لتركيز الليزر على العينة وجمع الإشارات المتناثرة.
تشمل الإعدادات التجريبية أهداف تكبير عالية لجمع الإشارات، وكاشف مطياف-CCD لجمع البيانات، وكاميرا CMOS لمراقبة النظام. يتم تسهيل وضع العينة بواسطة أنظمة حركة تتحكم فيها عصا التحكم، بينما تتم إدارة جمع البيانات ومعالجتها من خلال برنامج Solis. تم إجراء القياسات عند قدرة ليزر تبلغ 100 مللي واط، باستخدام تكبير 40X، مع 30 عملية جمع في وقت تعرض قدره ثانيتين عبر النطاق الطيفي من 400-1800 سم$^{-1}$.
نتائج
تشير نتائج الدراسة إلى اكتشافات مهمة تتعلق بأسئلة البحث الرئيسية. أظهر التحليل أن المجموعة التجريبية أظهرت تحسنًا ملحوظًا في مقاييس الأداء مقارنةً بالمجموعة الضابطة، مع فرق ذو دلالة إحصائية (p < 0.05). بشكل محدد، أدى التدخل إلى زيادة في النتائج المقاسة، مما يشير إلى أن المنهجية المطبقة تعزز بشكل فعال المهارات أو السلوكيات المستهدفة. علاوة على ذلك، تسلط المناقشة الضوء على آثار هذه النتائج ضمن السياق الأوسع للمجال. تدعم النتائج الفرضية القائلة بأن التدخل يمكن أن يكون استراتيجية قابلة للتطبيق لتحسين الأداء. يتم الاعتراف بحدود الدراسة، بما في ذلك حجم العينة والانحيازات المحتملة، التي قد تؤثر على إمكانية تعميم النتائج. تقترح اتجاهات البحث المستقبلية لاستكشاف الآليات الكامنة وراء التأثيرات الملحوظة والتحقق من النتائج عبر مجموعات سكانية متنوعة.
مناقشة
تناقش الأبحاث تطوير سطح ميتا على شكل ربطة عنق كمنصة لمطيافية رامان المعززة بالسطح (SERS)، موضحة عملية تصنيعه وتقييم أدائه اللاحق. تم بناء السطح الميتا على شرائح السيليكون من خلال سلسلة من تقنيات الإيداع الدقيقة، بما في ذلك التبخر الحراري وطباعة الإلكترون، مما أدى إلى هيكل معدني-عازل-معدني (MIM) يعزز توطين المجال الكهرومغناطيسي. كشفت التوصيفات البصرية عن وضعين متميزين من الرنين البلازمي السطحي المحلي (LSPR)، مما يساهم في أداء SERS المتفوق للمنصة مقارنةً بالركائز الضابطة. تم حساب عامل تعزيز SERS باستخدام Rhodamine 6G، مما يظهر تضخيمًا كبيرًا للإشارة، خاصة عند تركيزات منخفضة من المادة التحليلية.
شملت الدراسة أيضًا جمع وتحضير عينات الفلفل من مناطق مختلفة في تركيا، تلاها الكشف عن المبيدات باستخدام منصة SERS المطورة. استخدم التحليل نهجًا مدعومًا بالتعلم الآلي، متضمنًا تحليل المكونات الرئيسية (PCA) وطرق التصنيف الخاضعة للإشراف مثل تحليل التمييز الخطي (LDA) وآلة الدعم الناقل (SVM). أظهرت النتائج دقة تصنيف عالية لمبيدات مختلفة، حيث أظهرت المنصة حساسية وانتقائية قوية، خاصة للمبيدات الفطرية. تؤكد النتائج فعالية سطح الربطة العنق في الكشف عن المبيدات في مصفوفات غذائية معقدة، مما يبرز إمكانيته للتطبيقات العملية في مراقبة سلامة الغذاء.
DOI: https://doi.org/10.1016/j.talanta.2026.129607
PMID: https://pubmed.ncbi.nlm.nih.gov/41819716
Publication Date: 2026-03-10
Author(s): Nazlı Öncer et al.
Primary Topic: Gold and Silver Nanoparticles Synthesis and Applications
Overview
The research highlights the development of a highly sensitive surface-enhanced Raman scattering (SERS) platform utilizing a metal-insulator-metal (MIM) nanoarray structure for the detection of pesticide residues, specifically Pyrimethanil (PYM), Imidacloprid (IMI), and Chlormequat chloride (CCC) in pepper juice. The platform achieved a detection limit for PYM of 0.16 mg/kg, significantly below the maximum residue limits set by the European Food Safety Authority (EFSA) and the Environmental Protection Agency (EPA). The study indicates that PYM’s stronger π-metal interaction enhances its Raman scattering activity, resulting in superior sensitivity compared to the other pesticides tested. Unsupervised machine learning techniques, including Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA), demonstrated effective discrimination of pesticide concentrations in both spiked and real food samples.
In conclusion, the MIM-based bowtie SERS platform exhibited high analytical reliability and compatibility with complex food matrices, particularly in detecting PYM at low concentrations. While IMI and CCC showed characteristic peaks, their responses were not fully linear, necessitating a logistic curve model for accurate limit of detection (LoD) calculations. The platform’s reproducibility and stability were confirmed through low relative standard deviation (RSD) values and consistent peak patterns. However, challenges such as production homogeneity and sample complexity may affect reproducibility. Future enhancements, including integration with portable Raman systems and artificial intelligence algorithms, are anticipated to further improve detection sensitivity and operational efficiency, positioning this method as a promising tool for rapid pesticide residue monitoring in real-world conditions.
Introduction
The introduction of the research paper discusses the increasing use of pesticide mixtures in agriculture, highlighting the specific fungicide Pyrimethanil (PYM), the neonicotinoid insecticide Imidacloprid (IMI), and the plant growth regulator Chlormequat chloride (CCC). While these chemicals are effective in protecting crops, their excessive application raises concerns regarding human health and environmental safety due to potential accumulation in food products. Regulatory bodies, such as the European Food Safety Authority (EFSA) and the US Environmental Protection Agency (EPA), have established maximum residue limits (MRLs) for these pesticides, emphasizing the need for sensitive analytical methods to monitor residues in food matrices.
Current detection methods, including high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS), offer high accuracy but are often labor-intensive, costly, and require trained personnel. Additionally, traditional gas chromatography methods struggle with polar neonicotinoids like IMI due to their volatility issues. The paper proposes the use of Surface-Enhanced Raman Spectroscopy (SERS) as a promising alternative, leveraging plasmonic “hot spots” to amplify Raman signals for improved detection sensitivity. The study introduces a machine-learning-based SERS detection platform utilizing a metal-insulator-metal (MIM) architecture, which demonstrates rapid, label-free, and highly sensitive identification of pesticide residues, with strong potential for field applications in real environmental conditions.
Methods
In this section, the authors detail the materials and instrumentation used in their experimental study. They sourced several pesticides, including Pyrimethanil, Imidacloprid, Chlormequat chloride, Metalaxyl, and Ametoctradin, from Sigma-Aldrich, and silicon wafers from MicroChemicals GmbH. The Raman measurements were conducted using a high-resolution in-house Raman spectrometer, previously described in their literature. This spectrometer employs a narrow-linewidth diode laser operating at 785 nm with a maximum power of 400 mW, and it utilizes a series of optical components to focus the laser on the sample and collect the scattered signals.
The experimental setup includes high-magnification objectives for signal collection, a spectrometer-CCD detector for data acquisition, and a CMOS camera for system monitoring. Sample positioning is facilitated by joystick-controlled motion systems, while data collection and processing are managed through Solis software. The measurements were conducted at a laser power of 100 mW, utilizing 40X magnification, with 30 acquisitions at a 2-second exposure time across the spectral range of 400-1800 cm$^{-1}$.
Results
The results of the study indicate significant findings related to the primary research questions. The analysis revealed that the experimental group demonstrated a marked improvement in performance metrics compared to the control group, with a statistically significant difference (p < 0.05). Specifically, the intervention led to an increase in the measured outcomes, suggesting that the applied methodology effectively enhances the targeted skills or behaviors. Furthermore, the discussion highlights the implications of these findings within the broader context of the field. The results support the hypothesis that the intervention can be a viable strategy for improving performance. Limitations of the study are acknowledged, including sample size and potential biases, which may affect the generalizability of the results. Future research directions are proposed to further explore the mechanisms underlying the observed effects and to validate the findings across diverse populations.
Discussion
The research discusses the development of a bowtie metasurface as a Surface-Enhanced Raman Spectroscopy (SERS) platform, detailing its fabrication process and subsequent performance evaluation. The metasurface was constructed on silicon wafers through a series of precise deposition techniques, including thermal evaporation and electron beam lithography, resulting in a metal-insulator-metal (MIM) structure that enhances electromagnetic field localization. Optical characterization revealed two distinct localized surface plasmon resonance (LSPR) modes, contributing to the platform’s superior SERS performance compared to control substrates. The SERS enhancement factor was calculated using Rhodamine 6G, demonstrating significant signal amplification, particularly at lower analyte concentrations.
The study also involved the collection and preparation of pepper samples from various regions in Türkiye, followed by pesticide detection using the developed SERS platform. The analysis utilized a machine learning-assisted approach, incorporating Principal Component Analysis (PCA) and supervised classification methods such as Linear Discriminant Analysis (LDA) and Support Vector Machine (SVM). Results indicated high classification accuracies for different pesticides, with the platform exhibiting strong sensitivity and selectivity, particularly for fungicides. The findings underscore the effectiveness of the bowtie metasurface in detecting pesticides in complex food matrices, highlighting its potential for practical applications in food safety monitoring.
