DOI: https://doi.org/10.1111/jopr.13868
PMID: https://pubmed.ncbi.nlm.nih.gov/38742795
تاريخ النشر: 2024-05-14
المؤلف: Toshiki Nagai وآخرون
الموضوع الرئيسي: المواد السنية والترميمات
نظرة عامة
هدفت الدراسة إلى تقييم استقرار اللون لمواد الترميم المختلفة المطبوعة بتقنية ثلاثية الأبعاد والمشغولة بعد الغمر في اللعاب الصناعي والنبيذ على مدى فترات زمنية تبلغ 1 و 3 و 6 أشهر. باستخدام تصميم عاملي 2 × 5، شملت الدراسة 10 مجموعات فرعية بناءً على سائلين للغمر وخمسة تركيبات من تكنولوجيا التصنيع ومواد الترميم. تم تقييم التغيرات اللونية بشكل كمي باستخدام نظام CIE2000، مع أخذ القياسات قبل الغمر وفي فترات محددة. أظهر التحليل الإحصائي من خلال قياسات متكررة لـ ANOVA أن النبيذ أثر بشكل كبير على استقرار اللون، حيث تجاوزت قيم ΔE 00 عتبة الإدراك (PT) البالغة 0.8 وعتبة القبول (AT) البالغة 1.8 عبر جميع المجموعات، باستثناء التيجان النهائية المشغولة المصنوعة من مادة السيراميك النانوية الهجينة.
أشارت النتائج إلى أنه بينما ظلت 80%-100% من العينات المغمورة في اللعاب الصناعي ضمن حدود تغيير اللون المقبولة، أدى التعرض للنبيذ إلى تلوين كبير لمعظم المواد. ومن الجدير بالذكر أن التيجان النهائية المملوءة بالسيراميك الهجين المطبوعة بتقنية ثلاثية الأبعاد أظهرت تغييرات لونية كبيرة، مما أثار القلق للمرضى الذين يستهلكون النبيذ بكثرة. في المقابل، أظهرت التيجان النهائية المشغولة استقرارًا لونيًا أفضل. تستنتج الدراسة أن نوع الطابعة ثلاثية الأبعاد لا يؤثر بشكل كبير على استقرار اللون تحت ظروف متطابقة، وبالتالي، قد لا تكون الترميمات المملوءة بالسيراميك الهجين المطبوعة بتقنية ثلاثية الأبعاد مناسبة للمرضى القلقين بشأن تغير اللون الناتج عن استهلاك النبيذ.
الطرق
في هذه الدراسة، تم إعداد دعامة تاجية كاملة التغطية مصنوعة من السيراميك على نموذج أسنان كامل الفك العلوي، تلاها رقمنة باستخدام ماسح ضوئي مختبري وتصميم عبر برنامج CAD-CAM. استخدمت الدراسة تصميمًا عامليًا 2 × 5 مع 10 تركيبات علاجية، حيث تم فحص تأثير سائلين للغمر (اللعاب الصناعي والنبيذ) وخمسة تركيبات من تكنولوجيا التصنيع/مواد الترميم. قدم حجم العينة البالغ 10 لكل مجموعة قوة 80% لاكتشاف الفروق المهمة في تغييرات اللون وتأثيرات أخرى عبر المجموعات.
شملت الدراسة مجموعات مختلفة، بما في ذلك التيجان المؤقتة والنهائية المطبوعة بتقنية ثلاثية الأبعاد المصنوعة من مواد مختلفة والمغمورة في اللعاب الصناعي أو النبيذ. خضعت كل مجموعة لبروتوكولات تثبيت محددة، وتم تقييم استقرار اللون في نقاط زمنية متعددة (1 و 3 و 6 أشهر) باستخدام مقياس طيفي رقمي. تم استخدام صيغة CIEDE2000 لتQuantify الفروق اللونية، وتم إجراء التحليلات الإحصائية باستخدام اختبارات t لعينة واحدة وANOVA للقياسات المتكررة لتقييم أهمية تغييرات اللون عبر المجموعات والنقاط الزمنية. كانت النتائج تهدف إلى تقديم رؤى حول تأثير تقنيات التصنيع وظروف الغمر على الخصائص الجمالية لترميمات الأسنان.
النتائج
تشير نتائج الدراسة إلى أن الغمر في النبيذ يؤثر بشكل كبير على تغييرات اللون في مواد الترميم، حيث تجاوزت قيم ΔE عتبة الإدراك (PT) البالغة 1.8 وعتبة القبول (AT) البالغة 0.8 لعدة مجموعات. على وجه الخصوص، أظهرت المجموعات 2 و 4 و 6 و 8 تغييرات لونية كبيرة في جميع الفترات الزمنية، بينما تجاوزت المجموعة 10 فقط قيمة PT. أدى الغمر في النبيذ إلى انخفاض في السطوع (قيم L*)، مما جعل العينات تبدو أغمق. في المقابل، عندما تم غمرها في اللعاب الصناعي، حافظت جميع المجموعات على 70%-100% من العينات ضمن الحدود المقبولة والملحوظة.
كشف التحليل الإحصائي عن فروق كبيرة في تغييرات اللون (ΔE) عبر مجموعات ونقاط زمنية مختلفة، خاصة بالنسبة للمجموعات 2 و 4 و 6 و 8، التي أظهرت باستمرار قيم ΔE أعلى بكثير من العتبات (p < 0.001). تسلط البيانات المقدمة في الجدول 2 الضوء على متوسط تغييرات اللون عند 1 و 3 و 6 أشهر، مع قيم p المهمة التي تشير إلى قوة هذه النتائج. بشكل عام، تؤكد الدراسة على تأثير سوائل الغمر على الخصائص الجمالية لمواد الترميم بمرور الوقت.
المناقشة
تسلط قسم المناقشة في الدراسة الضوء على التأثير الكبير للمشروبات الملونة، وخاصة النبيذ، على استقرار اللون لمختلف ترميمات الأسنان خلال فترات الغمر التي تبلغ 1 و 3 و 6 أشهر. تم رفض الفرضيات الصفرية، مما يشير إلى أن كل من الترميمات المؤقتة والنهائية المطبوعة بتقنية ثلاثية الأبعاد والمشغولة شهدت تلوينًا كبيرًا يتجاوز العتبة المقبولة (AT) لـ ΔE 00 = 1.8 وعتبة الإدراك (PT) لـ ΔE 00 = 0.8. ومن الجدير بالذكر أن التيجان النهائية المشغولة المصنوعة من مادة السيراميك النانوية الهجينة أظهرت استقرارًا لونيًا أفضل مقارنةً بالتيجان المؤقتة المطبوعة بتقنية ثلاثية الأبعاد والتيجان النهائية المطبوعة بتقنية ثلاثية الأبعاد المصنوعة من مادة مملوءة بالسيراميك الهجين، والتي أظهرت مستويات مشابهة من التلوين.
كما وجدت الدراسة أن نوع تكنولوجيا الطباعة ثلاثية الأبعاد (المعالجة الضوئية الرقمية مقابل الاستريوليثوغرافيا) لم يؤثر بشكل كبير على استقرار اللون عند استخدام نفس المادة، مما يتعارض مع الأدبيات السابقة. وهذا يشير إلى أن الخصائص الجوهرية لمادة السيراميك الهجين المملوءة (VarseoSmile Crown Plus) قد تخفف من الفروق في الأداء بين تقنيات الطباعة. تؤكد النتائج على أهمية مراعاة كل من تركيب المادة وظروف الغمر عند تقييم استقرار اللون، خاصة بالنسبة للمرضى الذين يستهلكون النبيذ بانتظام. تشمل التوصيات استخدام مواد التزجيج لتعزيز استقرار اللون وإجراء المزيد من الأبحاث لاستكشاف الخصائص البصرية لترميمات السيراميك الهجين المطبوعة بتقنية ثلاثية الأبعاد في البيئات السريرية.
DOI: https://doi.org/10.1111/jopr.13868
PMID: https://pubmed.ncbi.nlm.nih.gov/38742795
Publication Date: 2024-05-14
Author(s): Toshiki Nagai et al.
Primary Topic: Dental materials and restorations
Overview
The study aimed to evaluate the color stability of various 3D-printed and milled restorative materials after immersion in artificial saliva and wine over periods of 1, 3, and 6 months. Utilizing a 2 × 5 factorial design, the research involved 10 subgroups based on two immersion liquids and five combinations of manufacturing technology and restorative materials. Color changes were quantitatively assessed using the CIE2000 system, with measurements taken before immersion and at specified intervals. Statistical analysis through repeated measures of ANOVA revealed that wine significantly affected color stability, with ΔE 00 values exceeding the perceptibility threshold (PT) of 0.8 and the acceptability threshold (AT) of 1.8 across all groups, except for milled definitive crowns made from hybrid nano-ceramic material.
The findings indicated that while 80%-100% of samples immersed in artificial saliva remained within acceptable color change limits, exposure to wine resulted in substantial discoloration for most materials. Notably, 3D-printed hybrid ceramic-filled definitive crowns exhibited significant color changes, raising concerns for patients with high wine consumption. In contrast, milled definitive crowns demonstrated superior color stability. The study concludes that the type of 3D printer does not significantly influence color stability under identical conditions, and thus, 3D-printed hybrid ceramic-filled restorations may not be suitable for patients concerned about discoloration from wine consumption.
Methods
In this study, a full-coverage all-ceramic crown abutment was prepared on a maxillary complete dentate dentoform, followed by digitization using a laboratory scanner and design via CAD-CAM software. The research employed a 2 × 5 factorial design with 10 treatment combinations, examining the effects of two immersion liquids (artificial saliva and wine) and five manufacturing technology/restorative material combinations. A sample size of 10 per group provided 80% power to detect significant differences in color changes and other effects across groups.
The study involved various groups, including 3D-printed interim and definitive crowns made from different materials and immersed in either artificial saliva or wine. Each group underwent specific cementation protocols, and color stability was assessed at multiple time points (1, 3, and 6 months) using a digital spectrophotometer. The CIEDE2000 formula was employed to quantify color differences, with statistical analyses conducted using one-sample t-tests and repeated measures ANOVA to evaluate the significance of color changes across groups and time points. The results aimed to provide insights into the impact of manufacturing techniques and immersion conditions on the aesthetic properties of dental restorations.
Results
The results of the study indicate that immersion in wine significantly affects color changes in restorative materials, with ΔE values exceeding the perceptibility threshold (PT) of 1.8 and the acceptability threshold (AT) of 0.8 for several groups. Specifically, Groups 2, 4, 6, and 8 exhibited substantial color changes at all time intervals, while Group 10 only surpassed the PT value. The immersion in wine resulted in a decrease in lightness (L* values), making the samples appear darker. In contrast, when immersed in artificial saliva, all groups maintained 70%-100% of samples within the acceptable and perceptible thresholds.
Statistical analysis revealed significant differences in color changes (ΔE) across various groups and time points, particularly for Groups 2, 4, 6, and 8, which consistently showed ΔE values well above the thresholds (p < 0.001). The data presented in Table 2 highlights the mean color changes at 1, 3, and 6 months, with significant p-values indicating the robustness of these findings. Overall, the study underscores the impact of immersion liquids on the aesthetic properties of restorative materials over time.
Discussion
The discussion section of the study highlights the significant impact of chromogenic beverages, particularly wine, on the color stability of various dental restorations over immersion periods of 1, 3, and 6 months. The null hypotheses were rejected, indicating that both 3D-printed and milled interim and definitive restorations experienced substantial discoloration beyond the established acceptability threshold (AT) of ΔE 00 = 1.8 and perceptibility threshold (PT) of ΔE 00 = 0.8. Notably, milled definitive crowns made from hybrid nano-ceramic material exhibited superior color stability compared to 3D-printed and milled interim crowns and 3D-printed definitive crowns made from hybrid ceramic-filled material, which showed similar levels of discoloration.
The study also found that the type of 3D printing technology (Digital Light Processing vs. Stereolithography) did not significantly affect color stability when using the same material, contradicting previous literature. This suggests that the inherent properties of the hybrid ceramic-filled material (VarseoSmile Crown Plus) may mitigate differences in performance between printing technologies. The findings emphasize the importance of considering both the material composition and the immersion conditions when evaluating color stability, particularly for patients with regular wine consumption. Recommendations include the use of glazing materials to enhance color stability and further research to explore the optical properties of 3D-printed hybrid ceramic-filled restorations in clinical settings.
