DOI: https://doi.org/10.3389/fsufs.2026.1849828
تاريخ النشر: 2026-06-05
المؤلف: Rakesh Kumar Gupta وآخرون
الموضوع الرئيسي: أفلام النانو المركبة لتغليف الطعام
نظرة عامة
تسلط المراجعة الضوء على الانتقال من التعبئة والتغليف التقليدية للمواد الغذائية البلاستيكية إلى البدائل القابلة للتحلل، مع التركيز بشكل خاص على الجزيئات الحيوية القائمة على الكيتوزان كنظم تعبئة ذكية. يتميز الكيتوزان بنشاطه المضاد للميكروبات، وقابليته للتحلل، وقدرته على تشكيل الأفلام، وطبيعته الكاتيونية، مما يسهل بشكل جماعي تطوير الأفلام والطلاءات متعددة الوظائف. تناقش المراجعة تقنيات التعبئة الذكية المختلفة، بما في ذلك مؤشرات الوقت ودرجة الحرارة، والأنظمة المستجيبة للـ pH، وأجهزة الاستشعار الحيوية المبتكرة، بينما تتناول أيضًا استراتيجيات التركيب مثل خلط البوليمرات الحيوية وإدماج المواد النانوية التي تعزز أداء المواد القائمة على الكيتوزان.
تؤكد الخاتمة على تطور الكيتوزان إلى بوليمر حيوي متعدد الوظائف قادر على حماية الطعام بشكل نشط ومراقبة الجودة في الوقت الحقيقي. أظهرت استراتيجيات الهندسة الرئيسية، وخاصة التعزيز بالمواد النانوية مثل ZnO وTiO₂، تحسينات في الخصائص الميكانيكية والحاجزية. ومع ذلك، لا تزال هناك تحديات، بما في ذلك حساسية الرطوبة، واستقرار الإشارة، والامتثال التنظيمي. تحدد المراجعة خمسة تحديات ذات أولوية للتكيف التجاري، مثل تحسين انحراف الإشارة الناتج عن الرطوبة وإقامة بروتوكولات معايرة موحدة. في النهاية، سيتطلب الدمج الناجح لتعبئة الكيتوزان الذكية في أنظمة الغذاء المستدامة تقدمًا تعاونيًا عبر علوم المواد، وهندسة المستشعرات، والأطر التنظيمية.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على زيادة الإنتاج العالمي من البلاستيك، الذي يتجاوز 350 مليون طن سنويًا، مع توقعات تشير إلى أن البلاستيك المشتق من النفط سيشكل 20% من إجمالي استهلاك النفط بحلول عام 2050. تم تحديد تعبئة الطعام كمساهم رئيسي في هذا الاستهلاك، حيث تمثل حوالي 43% من نفايات البلاستيك. لقد أدت التحديات البيئية التي تطرحها التعبئة والتغليف التقليدية القائمة على النفط، بما في ذلك عدم قابليتها للتحلل واستنفاد احتياطيات الوقود الأحفوري، إلى التحول نحو البدائل القابلة للتحلل والقائمة على البيولوجيا، وخاصة البلاستيك الحيوي، الذي يمثل حاليًا حوالي 1% من الإنتاج العالمي من البلاستيك.
يتم التأكيد على الكيتوزان، وهو مشتق من الكيتين تم إزالة الأسيتيل منه، كأحد أكثر البوليمرات الحيوية الطبيعية وفرة، نظرًا لإمكاناته في تعبئة الطعام بسبب قابليته للتحلل، وعدم سميته، وخصائصه المضادة للميكروبات. يمكن أن يعزز من عمر الأطعمة القابلة للتلف ويمكن هندسته لدمج بوليمرات حيوية أخرى ومركبات نشطة حيويًا، مما يحسن من خصائصه الميكانيكية والحاجزية. تناقش الورقة أيضًا تطوير نظم التعبئة الذكية باستخدام الكيتوزان، والتي يمكن أن توفر معلومات في الوقت الحقيقي حول نضارة الطعام من خلال مؤشرات لونية وأجهزة استشعار غاز. ومع ذلك، تواجه الانتقال من البحث في المختبر إلى التطبيق التجاري تحديات مثل حساسية الرطوبة والعقبات التنظيمية. تهدف المراجعة إلى تحليل التقدم في الأفلام والطلاءات القائمة على الكيتوزان بشكل نقدي، مع التركيز على خصائصها، واستراتيجيات الهندسة، وأنظمة الاستشعار الذكية، والتطبيقات، والحواجز أمام التبني التجاري.
طرق
تناقش قسم البحث إدماج جزيئات النانو المعدنية وأكاسيد المعادن (MNPs) في الأفلام القائمة على الكيتوزان لتعزيز خصائصها الميكانيكية، وأداء الحاجز، والوظائف المضادة للميكروبات. تتفاعل MNPs، التي يتم تصنيعها من خلال تقليل كيميائي أو طرق خضراء، مع مجموعات الأمين والهيدروكسيل في الكيتوزان، مما يشكل مركبات مستقرة تحسن من السلامة الهيكلية. يتأثر أداء هذه الأفلام بنوع وحجم وتركيز الجزيئات النانوية، مما يستدعي تحسينها لمنع التكتل وضمان خصائص ميكانيكية وحاجزية فعالة. على سبيل المثال، زاد إضافة جزيئات السيليكا المغلفة بحمض الغاليك بشكل كبير من قوة الشد وقللت من نفاذية بخار الماء، بينما حسنت جزيئات أكسيد الزنك من مقاومة الماء والنشاط المضاد للميكروبات.
علاوة على ذلك، يبرز القسم دور MNPs في تعزيز قدرة الأفلام القائمة على الكيتوزان على حجب الأشعة فوق البنفسجية، وهو أمر حاسم لتمديد عمر الطعام من خلال التخفيف من التلف الأكسيدي والأكسدة الضوئية. حسنت إدماج جزيئات أكسيد التيتانيوم من قوة الشد وقللت من نقل الأكسجين، على الرغم من أن التحميل المفرط أدى إلى التكتل. تتأثر الخصائص المضادة للميكروبات ومضادات الأكسدة لـ MNPs بخصائصها الفيزيائية والكيميائية، حيث تظهر الجزيئات النانوية الأصغر فعالية أكبر في تعطيل الأغشية الميكروبية وزيادة إنتاج أنواع الأكسجين التفاعلية (ROS). بشكل عام، تظهر هذه الأفلام النانوية المركبة إمكانات كبيرة لتطبيقات تعبئة الطعام العملية، مما يحافظ على جودة الطعام ويمدد عمره الافتراضي.
مناقشة
تسلط المناقشة حول الكيتوزان الضوء على تركيبه الهيكلي ككوبوليمر كاتيونى خطي مشتق من الكيتين، الذي يتواجد بكثرة في المصادر الطبيعية مثل قشور القشريات والفطريات. تضع الخصائص الفريدة للكيتوزان، مثل قابليته للتحلل، والتوافق البيولوجي، وقدرته على تشكيل الأفلام، كبديل واعد للبلاستيك التقليدي عبر مختلف القطاعات، بما في ذلك تعبئة الطعام، والتطبيقات الطبية الحيوية، والزراعة. من الجدير بالذكر أن أفلام الكيتوزان تظهر قوة ميكانيكية كبيرة وخصائص حاجزية عند تعديلها بمركبات نشطة حيويًا، أو مواد نانوية، أو خلطها مع بوليمرات حيوية أخرى، مما يعزز من وظيفتها وقدراتها على الحفظ.
تشير الأبحاث إلى أن الأفلام القائمة على الكيتوزان يمكن هندستها لتحتوي على ميزات تعبئة ذكية، مثل التحكم في الرطوبة والغاز، والخصائص المضادة للميكروبات، ومراقبة الجودة الغذائية في الوقت الحقيقي من خلال مؤشرات لونية. لا يحسن إدماج البوليفينولات ومركبات حيوية أخرى الخصائص الميكانيكية والحرارية لأفلام الكيتوزان فحسب، بل يعزز أيضًا من فعاليتها كمضادات للأكسدة ومضادات للميكروبات. تعمل تقنيات مثل البلازما الباردة وعلاجات الإشعاع على تحسين خصائص الكيتوزان، مما يوسع من قابليته للتطبيق في أنظمة تعبئة الطعام المتنوعة. بشكل عام، تؤكد التطورات في تكنولوجيا الكيتوزان على إمكاناته كمواد مستدامة ومتعددة الوظائف في السعي نحو حلول تعبئة صديقة للبيئة.
القيود
يواجه تحويل الأفلام والطلاءات القائمة على الكيتوزان إلى تعبئة “نشطة ذكية” تجارية العديد من التحديات والقيود المترابطة، على الرغم من التحقق الشامل في المختبر. تشمل الحواجز الرئيسية القضايا التقنية المتعلقة بقابلية التوسع والاتساق في عمليات الإنتاج، والقيود الاقتصادية مثل الجدوى من حيث التكلفة والتنافسية في السوق، والعقبات التنظيمية التي يجب التنقل من خلالها للحصول على الموافقة والامتثال. تؤثر هذه العوامل بشكل جماعي على الجدوى الصناعية، والتصريح التنظيمي، والتبني العام لهذه الحلول التعبئة المبتكرة.
DOI: https://doi.org/10.3389/fsufs.2026.1849828
Publication Date: 2026-06-05
Author(s): Rakesh Kumar Gupta et al.
Primary Topic: Nanocomposite Films for Food Packaging
Overview
The review highlights the transition from conventional plastic food packaging to biodegradable alternatives, specifically focusing on chitosan-based biomacromolecules as intelligent packaging systems. Chitosan is characterized by its antimicrobial activity, biodegradability, film-forming capacity, and cationic nature, which collectively facilitate the development of multifunctional films and coatings. The review discusses various intelligent packaging techniques, including time-temperature indicators, pH-responsive systems, and innovative biosensors, while also addressing formulation strategies such as biopolymer blending and nanomaterial incorporation that enhance the performance of chitosan-based materials.
The conclusion emphasizes chitosan’s evolution into a multifunctional biopolymer capable of active food protection and real-time quality monitoring. Key engineering strategies, particularly the reinforcement with nanomaterials like ZnO and TiO₂, have shown improvements in mechanical and barrier properties. However, challenges remain, including moisture sensitivity, signal stability, and regulatory compliance. The review identifies five priority challenges for commercial adaptation, such as improving moisture-induced signal drift and establishing standardized calibration protocols. Ultimately, the successful integration of chitosan-based intelligent packaging into sustainable food systems will require collaborative advancements across material science, sensor engineering, and regulatory frameworks.
Introduction
The introduction of this research paper highlights the escalating global plastic production, which exceeds 350 million tons annually, with projections suggesting that petroleum-derived plastics will account for 20% of total oil consumption by 2050. Food packaging is identified as a major contributor to this consumption, responsible for approximately 43% of plastic waste. The environmental challenges posed by conventional petroleum-based packaging, including its non-biodegradability and the depletion of fossil fuel reserves, have prompted a shift towards biodegradable and bio-based alternatives, particularly bioplastics, which currently represent about 1% of global plastic production.
Chitosan, a deacetylated derivative of chitin and the second most abundant natural biopolymer, is emphasized for its potential in food packaging due to its biodegradability, non-toxicity, and antimicrobial properties. It can enhance the shelf life of perishable foods and can be engineered to incorporate other biopolymers and bioactive compounds, improving its mechanical and barrier properties. The paper also discusses the development of intelligent packaging systems using chitosan, which can provide real-time information about food freshness through colorimetric indicators and gas sensors. However, the transition from laboratory research to commercial application faces challenges such as moisture sensitivity and regulatory hurdles. The review aims to critically analyze advancements in chitosan-based films and coatings, focusing on their properties, engineering strategies, intelligent sensing systems, applications, and the barriers to commercial adoption.
Methods
The research section discusses the incorporation of metal and metal-oxide nanoparticles (MNPs) into chitosan-based films to enhance their mechanical properties, barrier performance, and antimicrobial functionality. MNPs, synthesized through chemical reduction or green methods, interact with chitosan’s amino and hydroxyl groups, forming stable complexes that improve structural integrity. The performance of these films is influenced by the type, size, and concentration of nanoparticles, necessitating optimization to prevent agglomeration and ensure effective mechanical and barrier properties. For example, the addition of gallic acid-grafted silica nanoparticles significantly increased tensile strength and reduced water vapor permeability, while zinc oxide nanoparticles improved water resistance and antimicrobial activity.
Furthermore, the section highlights the role of MNPs in enhancing the UV-blocking capacity of chitosan films, which is crucial for extending food shelf life by mitigating oxidative spoilage and photo-oxidation. The incorporation of titanium dioxide nanoparticles improved tensile strength and reduced oxygen transmission, although excessive loading led to agglomeration. The antimicrobial and antioxidant properties of MNPs are influenced by their physicochemical characteristics, with smaller nanoparticles exhibiting greater efficacy in disrupting microbial membranes and enhancing reactive oxygen species (ROS) production. Overall, these nanocomposite films demonstrate significant potential for practical food packaging applications, effectively preserving food quality and extending shelf life.
Discussion
The discussion on chitosan highlights its structural composition as a linear cationic copolymer derived from chitin, which is abundant in natural sources like crustacean shells and fungi. Chitosan’s unique properties, such as biodegradability, biological compatibility, and film-forming ability, position it as a promising alternative to conventional plastics across various sectors, including food packaging, biomedical applications, and agriculture. Notably, chitosan films exhibit significant mechanical strength and barrier properties when modified with bioactive compounds, nanomaterials, or blended with other biopolymers, enhancing their functionality and preservation capabilities.
Research indicates that chitosan-based films can be engineered to possess intelligent packaging features, such as moisture and gas control, antimicrobial properties, and real-time monitoring of food quality through colorimetric indicators. The incorporation of polyphenols and other bioactive compounds not only improves the mechanical and thermal properties of chitosan films but also enhances their antioxidant and antimicrobial efficacy. Techniques such as cold plasma and irradiation treatments further optimize chitosan’s properties, expanding its applicability in diverse food packaging systems. Overall, the advancements in chitosan technology underscore its potential as a sustainable and multifunctional material in the quest for eco-friendly packaging solutions.
Limitations
The translation of chitosan-based films and coatings into commercial “active-intelligent” packaging faces several interconnected challenges and limitations, despite thorough laboratory validation. Key barriers include technical issues related to the scalability and consistency of production processes, economic constraints such as cost-effectiveness and market competitiveness, and regulatory hurdles that must be navigated for approval and compliance. These factors collectively impact the industrial feasibility, regulatory clearance, and overall market adoption of these innovative packaging solutions.
