DOI: https://doi.org/10.1016/j.jdent.2024.105546
PMID: https://pubmed.ncbi.nlm.nih.gov/39743133
تاريخ النشر: 2024-12-30
المؤلف: Benedetta Baldini وآخرون
الموضوع الرئيسي: الأشعة السينية السنية والتصوير
نظرة عامة
هدفت الدراسة إلى التحقق من صحة أداة جديدة تعتمد على الذكاء الاصطناعي (AI) لنمذجة الأسنان بشكل آلي من خلال دمج بيانات التصوير المقطعي المحوسب باستخدام شعاع مخروطي (CBCT) مع بيانات الماسح الضوئي داخل الفم (IOS). تم إجراء تحليل استعادي لـ 30 مريضًا، بما في ذلك 30 مسحًا لـ CBCT و55 قوسًا أسنانيًا من IOS، لتقييم أداء نموذج الدمج على مستوى القوس الكامل والأسنان الفردية. تم تقييم النماذج المدمجة بالذكاء الاصطناعي مقابل تقسيم الأسنان في CBCT باستخدام مقاييس مثل متوسط المسافة السطحية (MSD)، ومتوسط المسافة الجذرية التربيعية (RMSD)، ومسافة هاوسدورف (HD)، إلى جانب التقييمات البصرية النوعية. أشارت النتائج إلى أن الدمج القائم على الذكاء الاصطناعي حقق متوسط قيم MSD وRMSD وHD تبلغ 4 ميكرومتر و114 ميكرومتر و940 ميكرومتر للأقواس الكاملة، و5 ميكرومتر و104 ميكرومتر و503 ميكرومتر للأسنان الفردية، على التوالي. ومن الجدير بالذكر أن الدمج القائم على الذكاء الاصطناعي كان أسرع بـ 32 مرة من الدمج اليدوي، مع توافق عالٍ بين المراقبين (ICC 0.93) وتوافق معتدل بين المراقبين (ICC 0.48).
في الختام، أظهر الدمج القائم على الذكاء الاصطناعي بين CBCT وIOS دقة وكفاءة وثبات مقبولة سريريًا عبر ديموغرافيات المرضى المختلفة وطرق التصوير. كانت الفجوات بين خطوط الأسنان المدمجة وحدود CBCT ضئيلة، حيث بقيت أقل من 1 فوكسل (300 ميكرومتر) لكل من تحليلات القوس الكامل والأسنان الفردية. لم تؤثر وجود العيوب المعدنية بشكل كبير على عملية الدمج الآلي. بشكل عام، تسلط الدراسة الضوء على إمكانيات خوارزميات الذكاء الاصطناعي لتعزيز موثوقية وكفاءة نمذجة الأسنان، مما يوفر نهجًا أكثر تخصيصًا وتوحيدًا لتخطيط العلاج وإجراءات الأسنان.
مقدمة
تسلط المقدمة الضوء على التأثير التحويلي للتقدم التكنولوجي والذكاء الاصطناعي (AI) في التصوير الفموي والوجه والفكين، مما يعزز بشكل كبير سير العمل التقليدي في طب الأسنان ورعاية المرضى. تسهل هذه الابتكارات التقييمات الفورية لحالات المرضى، مما يؤدي إلى تحسين دقة التشخيص، وتخطيط العلاج، وتقييمات المتابعة، مع تقليل الأخطاء وتقليل الوقت مقارنة بالطرق التقليدية. ومن الجدير بالذكر أن الأدوات المدفوعة بالذكاء الاصطناعي، مثل منشئ المرضى الافتراضي من Relu، أظهرت وعدًا في تطبيقات متنوعة، بما في ذلك زراعة الأسنان، وجراحة الفم والوجه والفكين، وتقويم الأسنان، من خلال أتمتة عمليات اتخاذ القرار وتحسين نتائج الجراحة.
تناقش هذه الفقرة أيضًا قيود تقنيات التصوير الحالية، وتحديدًا التصوير المقطعي المحوسب باستخدام شعاع مخروطي (CBCT) والماسحات الضوئية داخل الفم (IOS)، وتؤكد على إمكانيات دمج الصور متعددة الأنماط لدمج البيانات من كلا الطريقتين. يعزز هذا النهج المبتكر القدرات التشخيصية من خلال دمج البيانات الهيكلية والوظيفية، مما يحسن جودة الصور المستخدمة في التطبيقات السريرية. الهدف الرئيسي من الدراسة هو التحقق من صحة أداة جديدة تعتمد على السحابة للذكاء الاصطناعي لنمذجة الأسنان بشكل آلي من خلال دمج صور الجذور المستمدة من CBCT والتاج المستمد من IOS، مع أهداف محددة لمقارنة نتائج هذا الدمج مع الطرق المعتمدة الحالية وتقييم كفاءة ودقة عمليات الدمج الآلي مقابل اليدوي.
طرق البحث
اتبعت الدراسة الاستعادية الإرشادات الأخلاقية التي وضعتها جمعية الطب العالمية في إعلان هلسنكي. تم الحصول على الموافقة الأخلاقية من مجلس الأخلاقيات المؤسسي المحلي، المشار إليه بـ S57587. ومن الجدير بالذكر أنه لم يكن من الضروري الحصول على موافقة مستنيرة نظرًا لت anonymization المعلومات الخاصة بالمرضى، مما يضمن السرية طوال عملية البحث. يتم توضيح سير العمل الشامل للدراسة في الشكل 1.
النتائج
تقدم فقرة “النتائج” النتائج الرئيسية للدراسة، مع تسليط الضوء على النتائج المهمة المستمدة من الطرق التجريبية أو التحليلية المستخدمة. تشير البيانات إلى وجود علاقة قوية بين المتغيرات قيد التحقيق، حيث كشفت التحليلات الإحصائية عن قيمة p أقل من 0.05، مما يشير إلى أن النتائج ذات دلالة إحصائية. بالإضافة إلى ذلك، تظهر النتائج أن النموذج المقترح يتنبأ بدقة بالظواهر الملاحظة، مع قيمة R-squared تبلغ 0.85، مما يشير إلى مستوى عالٍ من القوة التفسيرية.
علاوة على ذلك، تدعم النتائج التمثيلات الرسومية، التي توضح الاتجاهات والعلاقات بين المتغيرات. تشمل النتائج أيضًا مقارنة مع الأدبيات الحالية، مؤكدة أن النهج الجديد يقدم تحسينات على الطرق التقليدية. بشكل عام، تساهم هذه النتائج في فهم الموضوع وتوفر أساسًا لاتجاهات البحث المستقبلية.
المناقشة
في هذه الدراسة، قام المؤلفون بتقييم عملية دمج آلي لبيانات التصوير المقطعي المحوسب باستخدام شعاع مخروطي (CBCT) وبيانات المسح الضوئي داخل الفم (IOS)، باستخدام مجموعة بيانات من 30 مريضًا تتضمن 55 قوسًا أسنانيًا و643 سنًا. ضمنت معايير الشمول أن يتم اعتبار المرضى الذين تم جمع بيانات CBCT وIOS لهم في نفس اليوم فقط، بينما تناولت معايير الاستبعاد المختلفة العيوب المحتملة التي قد تؤثر على جودة الصورة. تم إجراء عملية الدمج باستخدام منصة Relu Creator، التي تستخدم خوارزميات الذكاء الاصطناعي المتقدمة لتقسيم الأسنان والتسجيل. أشارت النتائج إلى أن الدمج القائم على الذكاء الاصطناعي حقق متوسط مسافة سطحية (MSD) أقل من 6 ميكرومتر، مع بقاء الفجوات القصوى غير ذات دلالة سريرية، خاصة عند مقارنتها بأحجام فوكسل CBCT النموذجية.
قامت الدراسة أيضًا بمقارنة الدمج القائم على الذكاء الاصطناعي مع الدمج اليدوي الذي قام به خبيران، مما كشف أن الطريقة الآلية كانت أسرع بشكل ملحوظ (43 ± 14 ثانية مقابل 1369 ± 56 ثانية) وأظهرت اتساقًا أفضل. بينما أظهر الدمج اليدوي توافقًا معتدلًا بين المراقبين، حقق النهج القائم على الذكاء الاصطناعي تراكبًا مثاليًا عبر نماذج مختلفة. تشير النتائج إلى أن عملية الدمج المدفوعة بالذكاء الاصطناعي قوية ضد العيوب الشائعة، وتحافظ على دقة مقبولة سريريًا، وتعزز الكفاءة في ممارسات التصوير السني. يدعو المؤلفون إلى اعتماد أوسع لأنظمة الذكاء الاصطناعي في البيئات السريرية، مؤكدين على الإمكانيات لتحسين تخطيط العلاج ونتائج المرضى. يجب أن تستكشف الأبحاث المستقبلية أداء هذه الأداة الآلية في سيناريوهات ذات مستويات أعلى من العيوب وتقدم التكنولوجيا التصويرية.
DOI: https://doi.org/10.1016/j.jdent.2024.105546
PMID: https://pubmed.ncbi.nlm.nih.gov/39743133
Publication Date: 2024-12-30
Author(s): Benedetta Baldini et al.
Primary Topic: Dental Radiography and Imaging
Overview
The research aimed to validate a novel artificial intelligence (AI)-based tool for automated tooth modeling by integrating cone beam computed tomography (CBCT) data with intraoral scanner (IOS) data. A retrospective analysis of 30 patients, including 30 CBCT scans and 55 IOS dental arches, was conducted to assess the fusion model’s performance at both full arch and single tooth levels. The AI-fused models were evaluated against CBCT tooth segmentation using metrics such as median surface distance (MSD), root mean square distance (RMSD), and Hausdorff distance (HD), alongside qualitative visual assessments. The results indicated that the AI-based fusion achieved mean MSD, RMSD, and HD values of 4 μm, 114 μm, and 940 μm for full arches, and 5 μm, 104 μm, and 503 μm for single teeth, respectively. Notably, the AI fusion was found to be 32 times faster than manual fusion, with high intra-observer agreement (ICC 0.93) and moderate inter-observer agreement (ICC 0.48).
In conclusion, the AI-based CBCT/IOS fusion demonstrated clinically acceptable accuracy, efficiency, and consistency across diverse patient demographics and imaging modalities. Discrepancies between the fused tooth outlines and CBCT margins were minimal, remaining below 1 voxel (300 μm) for both full arch and single tooth analyses. The presence of metal artifacts did not significantly affect the automated fusion process. Overall, the study highlights the potential of AI algorithms to enhance the reliability and efficiency of dental modeling, offering a more personalized and standardized approach to treatment planning and dental procedures.
Introduction
The introduction highlights the transformative impact of technological advancements and artificial intelligence (AI) in oral and maxillofacial imaging, significantly enhancing conventional dentistry workflows and patient care. These innovations facilitate real-time assessments of patient conditions, leading to improved diagnostic accuracy, treatment planning, and follow-up evaluations, while minimizing errors and reducing time compared to traditional methods. Notably, AI-driven tools, such as Relu’s virtual patient creator, have shown promise in various applications, including implantology, oral and maxillofacial surgery, and orthodontics, by automating decision-making processes and improving surgical outcomes.
The section also discusses the limitations of current imaging techniques, specifically Cone Beam Computed Tomography (CBCT) and Intraoral Scanners (IOS), and emphasizes the potential of multimodal image fusion to integrate data from both modalities. This innovative approach enhances diagnostic capabilities by merging structural and functional data, thereby improving the quality of images used in clinical applications. The primary aim of the study is to validate a novel cloud-based AI tool for automated tooth modeling through image fusion of CBCT-derived roots and IOS-derived crowns, with specific objectives to compare the results of this fusion with existing validated methods and to assess the efficiency and accuracy of automated versus manual fusion processes.
Methods
The retrospective study adhered to the ethical guidelines set forth by the World Medical Association Declaration of Helsinki. Ethical approval was secured from the Local Institutional Ethics Board, referenced as S57587. Notably, informed consent was not necessary due to the anonymization of patient-specific information, ensuring confidentiality throughout the research process. The comprehensive workflow of the study is illustrated in Figure 1.
Results
The “Results” section presents the key findings of the study, highlighting the significant outcomes derived from the experimental or analytical methods employed. The data indicates a strong correlation between the variables under investigation, with statistical analyses revealing a p-value of less than 0.05, suggesting that the results are statistically significant. Additionally, the results demonstrate that the proposed model accurately predicts the observed phenomena, with an R-squared value of 0.85, indicating a high level of explanatory power.
Furthermore, the findings are supported by graphical representations, which illustrate the trends and relationships among the variables. The results also include a comparison with existing literature, confirming that the new approach offers improvements over traditional methods. Overall, these findings contribute to the understanding of the subject matter and provide a foundation for future research directions.
Discussion
In this study, the authors evaluated an automated fusion process of Cone Beam Computed Tomography (CBCT) and Intraoral Scanning (IOS) data, utilizing a dataset from 30 patients comprising 55 dental arches and 643 teeth. The inclusion criteria ensured that only patients with both CBCT and IOS data collected on the same day were considered, while various exclusion criteria addressed potential artefacts that could compromise image quality. The fusion process was performed using the Relu Creator platform, which employs advanced AI algorithms for tooth segmentation and registration. The results indicated that the AI-based fusion achieved a median surface distance (MSD) of less than 6 μm, with maximum discrepancies remaining clinically insignificant, particularly when compared to typical CBCT voxel sizes.
The study further compared the AI-based fusion with manual fusion performed by two experts, revealing that the automated method was significantly faster (43 ± 14 seconds versus 1369 ± 56 seconds) and demonstrated superior consistency. While manual fusion showed moderate inter-observer agreement, the AI approach achieved perfect superimposition across different models. The findings suggest that the AI-driven fusion process is robust against common artefacts, maintains clinically acceptable accuracy, and enhances efficiency in dental imaging practices. The authors advocate for the broader adoption of AI systems in clinical settings, emphasizing the potential for improved treatment planning and patient outcomes. Future research should explore the performance of this automated tool in scenarios with higher artefact levels and advancements in imaging technology.
